From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH v3 1/2] iio: light: add support for TI's opt3001 light sensor Date: Sun, 19 Jul 2015 14:16:17 +0100 Message-ID: <55ABA321.1030800@kernel.org> References: <1435876079-26287-1-git-send-email-dannenberg@ti.com> <1435876079-26287-2-git-send-email-dannenberg@ti.com> <55993A4C.10105@kernel.org> <559D5366.8030003@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <559D5366.8030003-l0cyMroinI0@public.gmane.org> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Andreas Dannenberg , linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Felipe Balbi List-Id: devicetree@vger.kernel.org On 08/07/15 17:44, Andreas Dannenberg wrote: > On 07/05/2015 09:08 AM, Jonathan Cameron wrote: > >> Looking pretty good to me, though I'd like to give Peter time to take >> another look and give his reviewed-by etc. >> >> One really minor suggestion from me... >> >>> + >>> +static int opt3001_probe(struct i2c_client *client, >>> + const struct i2c_device_id *id) >>> +{ >>> + struct device *dev = &client->dev; >>> + >>> + struct iio_dev *iio; >>> + struct opt3001 *opt; >>> + int irq = client->irq; >>> + int ret = -ENOMEM; >>> + >>> + iio = devm_iio_device_alloc(dev, sizeof(*opt)); >>> + if (!iio) >> return -ENOMEM; would be cleaner, then there is no need to initialize >> ret either. > > Hi Jonathan, > thanks for looking at my code. While we are waiting for additional feedback would you > like me to go ahead and re-spin/re-test the patch with your latest suggestion? > > Regards, > Not to worry, I made that trivial change when applying. There was also some fuzz in the makefiles and kconfig as a result of other drivers going in, but all trivial. Applied to the togreg branch of iio.git. Thanks, Jonathan