Re: [PATCH v3 2/2] iio: light: opt3001: Add device tree binding documentation

[Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On 05/07/15 15:09, Jonathan Cameron wrote:
> On 02/07/15 23:27, Andreas Dannenberg wrote:
>> Signed-off-by: Andreas Dannenberg <dannenberg-l0cyMroinI0@public.gmane.org>
> Utterly standard binding so unless someone shouts, I'll pick this
> up with the driver.
Applied to the togreg branch of iio.git - initially pushed
out as testing for the autobuilders to play with it.

Thanks,

Jonathan
> 
> Thanks,
> 
> Jonathan
>> ---
>>  .../devicetree/bindings/iio/light/opt3001.txt          | 18 ++++++++++++++++++
>>  1 file changed, 18 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/iio/light/opt3001.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
>> new file mode 100644
>> index 0000000..d5f0765
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
>> @@ -0,0 +1,18 @@
>> +* Texas Instruments OPT3001 Ambient Light Sensor
>> +
>> +http://www.ti.com/product/opt3001
>> +
>> +Required properties:
>> +  - compatible: should be "ti,opt3001"
>> +  - reg: the I2C address of the sensor
>> +  - interrupt-parent: should be the phandle for the interrupt controller
>> +  - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
>> +
>> +Example:
>> +
>> +opt3001@44 {
>> +	compatible = "ti,opt3001";
>> +	reg = <0x44>;
>> +	interrupt-parent = <&gpio1>;
>> +	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
>> +};
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>