From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: Re: [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi Date: Tue, 28 Jul 2015 17:29:14 +0200 Message-ID: <55B79FCA.7070907@redhat.com> References: <1437960486-2809-1-git-send-email-public_timo.s@silentcreek.de> <55B5E6DB.8020009@redhat.com> <20150727120918.191F76C82FB4@dd34104.kasserver.com> <55B62768.6040403@redhat.com> <20150728124911.GA2564@lukather><55B790BA.5000509@redhat.com> <20150728150929.233B56C80391@dd34104.kasserver.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20150728150929.233B56C80391-RzmsueL7+k6AvxNu/8lEInnhMCiq3JZZ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Timo Sigurdsson , maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org List-Id: devicetree@vger.kernel.org Hi, On 07/28/2015 05:09 PM, Timo Sigurdsson wrote: > Hi, > > Hans de Goede schrieb am 28.07.2015 16:24: >> I've no problem with Timo submitting a cleaned up version of his >> patch and you taking that instead. I just wanted to point out that >> I do have a similar patch pending. > > Ok, I will do that. It might take a couple of days, though, as I will be moving > moving in the next few days as well. > > However, another question first then: What maximum voltage for the dcdc2 > regulator should we use then? You used 1.5V, I used 1.45V so far, which is what > Cubieboard 2 and Cubietruck use. > > But after the discussion about overvoltaged settings, I'm wondering whether we > should limit the regulartor (and not only the opp) to 1.40V as well? Or is > 1.45V ok for everybody here? The datasheets lists a max cpu-voltage of 1.40V, so lets stick with that. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html