From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nicolas Ferre Subject: Re: [PATCH v2 1/2] ARM: at91: dts: add isi & ov2640 dt nodes for at91sam9m10g45ek board Date: Thu, 30 Jul 2015 14:03:54 +0200 Message-ID: <55BA12AA.3030102@atmel.com> References: <1434449315-9243-1-git-send-email-josh.wu@atmel.com> <20150618154537.GM27492@piout.net> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <20150618154537.GM27492@piout.net> Sender: linux-kernel-owner@vger.kernel.org To: Alexandre Belloni , Josh Wu Cc: linux-arm-kernel@lists.infradead.org, Mark Rutland , devicetree@vger.kernel.org, Russell King , Pawel Moll , Ian Campbell , linux-kernel@vger.kernel.org, Rob Herring , Kumar Gala , Jean-Christophe Plagniol-Villard , Andrew Victor List-Id: devicetree@vger.kernel.org Le 18/06/2015 17:45, Alexandre Belloni a =E9crit : > Hi, >=20 > Seems good to me, a small comment below: >=20 > On 16/06/2015 at 18:08:34 +0800, Josh Wu wrote : >> @@ -1068,8 +1076,12 @@ >> clocks =3D <&isi_clk>; >> clock-names =3D "isi_clk"; >> pinctrl-names =3D "default"; >> - pinctrl-0 =3D <&pinctrl_isi>; >> + pinctrl-0 =3D <&pinctrl_isi_data_0_7>; >=20 > I would say that the pinctrl is board specific so both pinctrl-names = and > pinctrl-0 should go to at91sam9m10g45ek.dts I move it in the board file. Otherwise: Acked-by: Nicolas Ferre and stacked on top of at91-4.3-dt. Bye, --=20 Nicolas Ferre