From: Murali Karicheri <m-karicheri2@ti.com>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
ssantosh@kernel.org, mturquette@linaro.org, sboyd@codeaurora.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll
Date: Fri, 31 Jul 2015 10:20:02 -0400 [thread overview]
Message-ID: <55BB8412.2000905@ti.com> (raw)
In-Reply-To: <1432915453-409-2-git-send-email-m-karicheri2@ti.com>
On 05/29/2015 12:04 PM, Murali Karicheri wrote:
> All of the keystone devices have a separate register to hold post
> divider value for main pll clock. Currently the fixed-postdiv
> value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to
> use a value of 2 for this. Now that we have fixed this in the pll
> clock driver change the dt bindings for the same.
>
> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
> ---
> arch/arm/boot/dts/k2e-clocks.dtsi | 5 ++---
> arch/arm/boot/dts/k2hk-clocks.dtsi | 5 ++---
> arch/arm/boot/dts/k2l-clocks.dtsi | 5 ++---
> 3 files changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi
> index 4773d6a..d56d68f 100644
> --- a/arch/arm/boot/dts/k2e-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2e-clocks.dtsi
> @@ -13,9 +13,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk@2620358 {
> diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi
> index d5adee3..af9b719 100644
> --- a/arch/arm/boot/dts/k2hk-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2hk-clocks.dtsi
> @@ -22,9 +22,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk@2620358 {
> diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi
> index eb1e3e2..ef8464b 100644
> --- a/arch/arm/boot/dts/k2l-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2l-clocks.dtsi
> @@ -22,9 +22,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk@2620358 {
>
Santosh,
The clk driver update is already merged to v4.2-rc. Could you send this
DT update as well for 4.2-rc?
Murali
--
Murali Karicheri
Linux Kernel, Keystone
next prev parent reply other threads:[~2015-07-31 14:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-29 16:04 [PATCH 1/2] clk: keystone: add support for post divider register for main pll Murali Karicheri
[not found] ` <1432915453-409-1-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
2015-05-29 16:04 ` [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll Murali Karicheri
2015-07-31 14:20 ` Murali Karicheri [this message]
2015-07-31 15:30 ` santosh shilimkar
2015-07-31 15:30 ` santosh shilimkar
2015-07-31 20:30 ` Olof Johansson
2015-07-31 22:06 ` santosh.shilimkar
2015-06-09 15:25 ` [PATCH 1/2] clk: keystone: add support for post divider register for main pll Murali Karicheri
2015-06-15 16:26 ` Murali Karicheri
2015-06-18 22:37 ` Michael Turquette
2015-06-18 22:55 ` santosh shilimkar
[not found] ` <55834C64.6020703-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2015-06-22 20:15 ` Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55BB8412.2000905@ti.com \
--to=m-karicheri2@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@linaro.org \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=ssantosh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).