From: Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
To: Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Cc: Bjorn Helgaas <bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Jingoo Han <jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Pratyush Anand
<pratyush.anand-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
gabriele.paoloni-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org,
James Morse <james.morse-5wv7dgnIgG8@public.gmane.org>,
Liviu.Dudau-5wv7dgnIgG8@public.gmane.org,
Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
yuanzhichang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
zhudacai-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
zhangjukuo-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
qiuzhenfa-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
liudongdong3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
qiujiang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
kangfenglong-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
Jingoo Han <jingoohan1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: Re: [PATCH v6 4/6] PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
Date: Fri, 7 Aug 2015 14:08:02 +0800 [thread overview]
Message-ID: <55C44B42.2050906@hisilicon.com> (raw)
In-Reply-To: <1438848559-232109-5-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
[+cc jingoohan1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org]
On 2015/8/6 16:09, Zhou Wang wrote:
> This patch adds PCIe host support for HiSilicon SoC Hip05.
>
> Signed-off-by: Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> ---
> drivers/pci/host/Kconfig | 8 ++
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-hisi.c | 254 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 263 insertions(+)
> create mode 100644 drivers/pci/host/pcie-hisi.c
>
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index c132bdd..cd2b80b 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -145,4 +145,12 @@ config PCIE_IPROC_BCMA
> Say Y here if you want to use the Broadcom iProc PCIe controller
> through the BCMA bus interface
>
> +config PCI_HISI
> + depends on OF && ARM64
> + bool "HiSilicon SoC HIP05 PCIe controller"
> + select PCIEPORTBUS
> + select PCIE_DW
> + help
> + Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
> +
> endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 140d66f..ea1dbf2 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -17,3 +17,4 @@ obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
> obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
> obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
> obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
> +obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
> diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/host/pcie-hisi.c
> new file mode 100644
> index 0000000..7dcacf1
> --- /dev/null
> +++ b/drivers/pci/host/pcie-hisi.c
> @@ -0,0 +1,254 @@
> +/*
> + * PCIe host controller driver for HiSilicon Hip05 SoC
> + *
> + * Copyright (C) 2015 HiSilicon Co., Ltd. http://www.hisilicon.com
> + *
> + * Author: Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> + * Dacai Zhu <zhudacai-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#include <linux/interrupt.h>
> +#include <linux/irqdomain.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_pci.h>
> +#include <linux/platform_device.h>
> +
> +#include "pcie-designware.h"
> +
> +#define PCIE_SUBCTRL_MODE_REG 0x2800
> +#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818
> +#define PCIE_SLV_DBI_MODE 0x0
> +#define PCIE_SLV_SYSCTRL_MODE 0x1
> +#define PCIE_SLV_CONTENT_MODE 0x2
> +#define PCIE_SLV_MSI_ASID 0x10
> +#define PCIE_LTSSM_LINKUP_STATE 0x11
> +#define PCIE_LTSSM_STATE_MASK 0x3F
> +#define PCIE_MSI_ASID_ENABLE (0x1 << 12)
> +#define PCIE_MSI_ASID_VALUE (0x1 << 16)
> +#define PCIE_MSI_TRANS_ENABLE (0x1 << 12)
> +#define PCIE_MSI_TRANS_REG 0x1c8
> +#define PCIE_MSI_LOW_ADDRESS 0x1b4
> +#define PCIE_MSI_HIGH_ADDRESS 0x1c4
> +#define PCIE_MSI_ADDRESS_VAL 0xb7010040
> +
> +#define to_hisi_pcie(x) container_of(x, struct hisi_pcie, pp)
> +
> +struct hisi_pcie {
> + void __iomem *subctrl_base;
> + void __iomem *reg_base;
> + struct msi_controller *msi;
> + u32 port_id;
> + struct pcie_port pp;
> +};
> +
> +static inline void hisi_pcie_subctrl_writel(struct hisi_pcie *pcie,
> + u32 val, u32 reg)
> +{
> + writel(val, pcie->subctrl_base + reg);
> +}
> +
> +static inline u32 hisi_pcie_subctrl_readl(struct hisi_pcie *pcie, u32 reg)
> +{
> + return readl(pcie->subctrl_base + reg);
> +}
> +
> +static inline void hisi_pcie_apb_writel(struct hisi_pcie *pcie,
> + u32 val, u32 reg)
> +{
> + writel(val, pcie->reg_base + reg);
> +}
> +
> +static inline u32 hisi_pcie_apb_readl(struct hisi_pcie *pcie, u32 reg)
> +{
> + return readl(pcie->reg_base + reg);
> +}
> +
> +/*
> + * Change mode to indicate the same reg_base to base of PCIe host configure
> + * registers, base of RC configure space or base of vmid/asid context table
> + */
> +static void hisi_pcie_change_apb_mode(struct hisi_pcie *pcie, u32 mode)
> +{
> + u32 val;
> + u32 bit_mask;
> + u32 bit_shift;
> + u32 port_id = pcie->port_id;
> + u32 reg = PCIE_SUBCTRL_MODE_REG + 0x100 * port_id;
> +
> + if ((port_id == 1) || (port_id == 2)) {
> + bit_mask = 0xc;
> + bit_shift = 0x2;
> + } else {
> + bit_mask = 0x6;
> + bit_shift = 0x1;
> + }
> +
> + val = hisi_pcie_subctrl_readl(pcie, reg);
> + val = (val & (~bit_mask)) | (mode << bit_shift);
> + hisi_pcie_subctrl_writel(pcie, val, reg);
> +}
> +
> +/* Configure vmid/asid table in PCIe host */
> +static void hisi_pcie_config_context(struct hisi_pcie *pcie)
> +{
> + int i;
> +
> + hisi_pcie_change_apb_mode(pcie, PCIE_SLV_CONTENT_MODE);
> +
> + /*
> + * init vmid and asid tables for all PCIe devices as 0
> + * vmid table: 0 ~ 0x3ff, asid table: 0x400 ~ 0x7ff
> + */
> + for (i = 0; i < 0x800; i++)
> + hisi_pcie_apb_writel(pcie, 0x0, i * 4);
> +
> + hisi_pcie_change_apb_mode(pcie, PCIE_SLV_SYSCTRL_MODE);
> +
> + hisi_pcie_apb_writel(pcie, PCIE_MSI_ADDRESS_VAL, PCIE_MSI_LOW_ADDRESS);
> + hisi_pcie_apb_writel(pcie, 0x0, PCIE_MSI_HIGH_ADDRESS);
> + hisi_pcie_apb_writel(pcie, PCIE_MSI_ASID_ENABLE | PCIE_MSI_ASID_VALUE,
> + PCIE_SLV_MSI_ASID);
> + hisi_pcie_apb_writel(pcie, PCIE_MSI_TRANS_ENABLE, PCIE_MSI_TRANS_REG);
> +
> + hisi_pcie_change_apb_mode(pcie, PCIE_SLV_DBI_MODE);
> +}
> +
> +static int hisi_pcie_link_up(struct pcie_port *pp)
> +{
> + u32 val;
> + struct hisi_pcie *hisi_pcie = to_hisi_pcie(pp);
> +
> + val = hisi_pcie_subctrl_readl(hisi_pcie, PCIE_SUBCTRL_SYS_STATE4_REG +
> + 0x100 * hisi_pcie->port_id);
> +
> + return ((val & PCIE_LTSSM_STATE_MASK) == PCIE_LTSSM_LINKUP_STATE);
> +}
> +
> +static
> +int hisi_pcie_msi_host_init(struct pcie_port *pp, struct msi_controller *chip)
> +{
> + struct device_node *msi_node;
> + struct irq_domain *irq_domain;
> + struct device_node *np = pp->dev->of_node;
> +
> + msi_node = of_parse_phandle(np, "msi-parent", 0);
> + if (!msi_node) {
> + dev_err(pp->dev, "failed to find msi-parent\n");
> + return -ENODEV;
> + }
> +
> + irq_domain = irq_find_host(msi_node);
> + if (!irq_domain) {
> + dev_err(pp->dev, "failed to find irq domain\n");
> + return -ENODEV;
> + }
> +
> + pp->irq_domain = irq_domain;
> +
> + return 0;
> +}
> +
> +static struct pcie_host_ops hisi_pcie_host_ops = {
> + .link_up = hisi_pcie_link_up,
> + .msi_host_init = hisi_pcie_msi_host_init,
> +};
> +
> +static int __init hisi_add_pcie_port(struct pcie_port *pp,
> + struct platform_device *pdev)
> +{
> + int ret;
> + u32 port_id;
> + struct resource busn;
> + struct hisi_pcie *hisi_pcie = to_hisi_pcie(pp);
> +
> + if (of_property_read_u32(pdev->dev.of_node, "port-id", &port_id)) {
> + dev_err(&pdev->dev, "failed to read port-id\n");
> + return -EINVAL;
> + }
> + if (port_id > 3) {
> + dev_err(&pdev->dev, "Invalid port-id: %d\n", port_id);
> + return -EINVAL;
> + }
> +
> + hisi_pcie->port_id = port_id;
> +
> + if (of_pci_parse_bus_range(pdev->dev.of_node, &busn)) {
> + dev_err(&pdev->dev, "failed to parse bus-ranges\n");
> + return -EINVAL;
> + }
> +
> + pp->root_bus_nr = busn.start;
> + pp->ops = &hisi_pcie_host_ops;
> +
> + hisi_pcie_config_context(hisi_pcie);
> +
> + ret = dw_pcie_host_init(pp);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to initialize host\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int __init hisi_pcie_probe(struct platform_device *pdev)
> +{
> + struct hisi_pcie *hisi_pcie;
> + struct pcie_port *pp;
> + struct resource *reg;
> + struct resource *subctrl;
> + int ret;
> +
> + hisi_pcie = devm_kzalloc(&pdev->dev, sizeof(*hisi_pcie), GFP_KERNEL);
> + if (!hisi_pcie)
> + return -ENOMEM;
> +
> + pp = &hisi_pcie->pp;
> + pp->dev = &pdev->dev;
> +
> + subctrl = platform_get_resource_byname(pdev, IORESOURCE_MEM, "subctrl");
> + hisi_pcie->subctrl_base = devm_ioremap_nocache(&pdev->dev,
> + subctrl->start, resource_size(subctrl));
> + if (IS_ERR(hisi_pcie->subctrl_base)) {
> + dev_err(pp->dev, "cannot get subctrl base\n");
> + return PTR_ERR(hisi_pcie->subctrl_base);
> + }
> +
> + reg = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rc_dbi");
> + hisi_pcie->reg_base = devm_ioremap_resource(&pdev->dev, reg);
> + if (IS_ERR(hisi_pcie->reg_base)) {
> + dev_err(pp->dev, "cannot get rc_dbi base\n");
> + return PTR_ERR(hisi_pcie->reg_base);
> + }
> +
> + hisi_pcie->pp.dbi_base = hisi_pcie->reg_base;
> +
> + ret = hisi_add_pcie_port(pp, pdev);
> + if (ret)
> + return ret;
> +
> + platform_set_drvdata(pdev, hisi_pcie);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id hisi_pcie_of_match[] = {
> + {.compatible = "hisilicon,hip05-pcie",},
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(of, hisi_pcie_of_match);
> +
> +static struct platform_driver hisi_pcie_driver = {
> + .probe = hisi_pcie_probe,
> + .driver = {
> + .name = "hisi-pcie",
> + .of_match_table = hisi_pcie_of_match,
> + },
> +};
> +
> +module_platform_driver(hisi_pcie_driver);
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-08-07 6:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-06 8:09 [PATCH v6 0/6] PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05 Zhou Wang
[not found] ` <1438848559-232109-1-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-08-06 8:09 ` [PATCH v6 1/6] PCI: designware: move calculation of bus addresses to DRA7xx Zhou Wang
[not found] ` <1438848559-232109-2-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-08-07 6:03 ` Zhou Wang
2015-08-07 6:04 ` Zhou Wang
[not found] ` <55C44A80.20308-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-08-12 15:40 ` Pratyush Anand
2015-08-06 8:09 ` [PATCH v6 2/6] ARM/PCI: remove align_resource in pci_sys_data Zhou Wang
[not found] ` <1438848559-232109-3-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-08-07 6:06 ` Zhou Wang
2015-08-12 15:42 ` Pratyush Anand
2015-08-06 8:09 ` [PATCH v6 3/6] PCI: designware: Add ARM64 support Zhou Wang
2015-08-07 6:07 ` Zhou Wang
2015-08-14 14:48 ` James Morse
[not found] ` <55CDFFC0.40604-5wv7dgnIgG8@public.gmane.org>
2015-08-14 14:55 ` Gabriele Paoloni
2015-08-17 4:50 ` Zhou Wang
2015-08-06 8:09 ` [PATCH v6 4/6] PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05 Zhou Wang
[not found] ` <1438848559-232109-5-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-08-07 6:08 ` Zhou Wang [this message]
2015-08-06 8:09 ` [PATCH v6 5/6] Documentation: DT: Add HiSilicon PCIe host binding Zhou Wang
[not found] ` <1438848559-232109-6-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-08-07 6:08 ` Zhou Wang
2015-08-06 8:09 ` [PATCH v6 6/6] MAINTAINERS: Add pcie-hisi maintainer Zhou Wang
[not found] ` <1438848559-232109-7-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-08-07 6:09 ` Zhou Wang
2015-08-07 6:01 ` [PATCH v6 0/6] PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05 Zhou Wang
[not found] ` <55C449AF.3030303-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-08-11 7:39 ` Gabriele Paoloni
2015-08-07 6:02 ` Zhou Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C44B42.2050906@hisilicon.com \
--to=wangzhou1-c8/m+/jpzteamjb+lgu22q@public.gmane.org \
--cc=Liviu.Dudau-5wv7dgnIgG8@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=gabriele.paoloni-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=james.morse-5wv7dgnIgG8@public.gmane.org \
--cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
--cc=jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=jingoohan1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=kangfenglong-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=liudongdong3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org \
--cc=pratyush.anand-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=qiujiang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=qiuzhenfa-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=yuanzhichang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zhangjukuo-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=zhudacai-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).