From: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Alexandre Belloni
<alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org,
johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
grygorii.strashko-l0cyMroinI0@public.gmane.org,
bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
t-kristo-l0cyMroinI0@public.gmane.org
Subject: Re: [PATCH 2/2] rtc: omap: Add external clock enabling support
Date: Fri, 14 Aug 2015 14:06:44 +0530 [thread overview]
Message-ID: <55CDA89C.1080407@linaro.org> (raw)
In-Reply-To: <20150814083319.GG22269-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>
On Friday 14 August 2015 02:03 PM, Alexandre Belloni wrote:
> On 13/08/2015 at 12:37:48 +0530, Keerthy wrote :
>> Configure the clock source to either internal clock
>> or external clock based on the availability of the clocks.
>> External clock is preferred as it can be ticking during suspend.
>>
>> Signed-off-by: Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>
>> ---
>> drivers/rtc/rtc-omap.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 44 insertions(+)
>>
>> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
>> index 8b6355f..479f730 100644
>> --- a/drivers/rtc/rtc-omap.c
>> +++ b/drivers/rtc/rtc-omap.c
>> @@ -25,6 +25,7 @@
>> #include <linux/of_device.h>
>> #include <linux/pm_runtime.h>
>> #include <linux/io.h>
>> +#include <linux/clk.h>
>>
>> /*
>> * The OMAP RTC is a year/month/day/hours/minutes/seconds BCD clock
>> @@ -107,6 +108,7 @@
>>
>> /* OMAP_RTC_OSC_REG bit fields: */
>> #define OMAP_RTC_OSC_32KCLK_EN BIT(6)
>> +#define OMAP_RTC_OSC_SEL_32KCLK_SRC BIT(3)
>>
>> /* OMAP_RTC_IRQWAKEEN bit fields: */
>> #define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN BIT(1)
>> @@ -136,6 +138,7 @@ struct omap_rtc {
>> int irq_timer;
>> u8 interrupts_reg;
>> bool is_pmic_controller;
>> + bool has_ext_clk;
>> const struct omap_rtc_device_type *type;
>> };
>>
>> @@ -525,6 +528,7 @@ static int omap_rtc_probe(struct platform_device *pdev)
>> {
>> struct omap_rtc *rtc;
>> struct resource *res;
>> + struct clk *ext_clk, *int_clk;
>> u8 reg, mask, new_ctrl;
>> const struct platform_device_id *id_entry;
>> const struct of_device_id *of_id;
>> @@ -553,6 +557,17 @@ static int omap_rtc_probe(struct platform_device *pdev)
>> if (rtc->irq_alarm <= 0)
>> return -ENOENT;
>>
>> + ext_clk = devm_clk_get(&pdev->dev, "ext-clk");
>> + if (!IS_ERR(ext_clk)) {
>> + rtc->has_ext_clk = true;
>> + clk_prepare(ext_clk);
>
> I'd say this has to be prepare_enable because you are not enabling those
> clocks anywhere
>
>> + } else {
>> + int_clk = devm_clk_get(&pdev->dev, "int-clk");
>> +
>> + if (!IS_ERR(int_clk))
>> + clk_prepare(int_clk);
>> + }
>> +
>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> rtc->base = devm_ioremap_resource(&pdev->dev, res);
>> if (IS_ERR(rtc->base))
>> @@ -627,6 +642,17 @@ static int omap_rtc_probe(struct platform_device *pdev)
>> if (reg != new_ctrl)
>> rtc_write(rtc, OMAP_RTC_CTRL_REG, new_ctrl);
>>
>> + /*
>> + * If we have the external clock then
>> + * Switch to external clock so we can keep ticking
>> + * acorss suspend
>> + */
>> + if (rtc->has_ext_clk) {
>> + reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
>> + rtc_write(rtc, OMAP_RTC_OSC_REG, reg |
>> + OMAP_RTC_OSC_SEL_32KCLK_SRC);
>> + }
>> +
>> rtc->type->lock(rtc);
>>
>> device_init_wakeup(&pdev->dev, true);
>> @@ -672,6 +698,8 @@ err:
>> static int __exit omap_rtc_remove(struct platform_device *pdev)
>> {
>> struct omap_rtc *rtc = platform_get_drvdata(pdev);
>> + struct clk *ext_clk, *int_clk;
>> + u8 reg;
>>
>> if (pm_power_off == omap_rtc_power_off &&
>> omap_rtc_power_off_rtc == rtc) {
>> @@ -681,10 +709,26 @@ static int __exit omap_rtc_remove(struct platform_device *pdev)
>>
>> device_init_wakeup(&pdev->dev, 0);
>>
>> + ext_clk = devm_clk_get(&pdev->dev, "ext-clk");
>> + if (!IS_ERR(ext_clk)) {
>> + clk_unprepare(ext_clk);
>> + } else {
>> + int_clk = devm_clk_get(&pdev->dev, "int-clk");
>> +
>> + if (!IS_ERR(int_clk))
>> + clk_unprepare(int_clk);
>> + }
>> +
>
> You can probably add ext_clk and int_clk to struct omap_rtc and avoid
> those devm_clk_get.
>
Since both int_clk and ext_clk are mutual exclusive, you can have only
one variable.
Thanks,
Vaibhav
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-08-14 8:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-13 7:07 [PATCH 0/2] ARM: AM437X: Add rtc clock handling Keerthy
[not found] ` <1439449668-32301-1-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2015-08-13 7:07 ` [PATCH 1/2] ARM: dts: AM437x: Add the internal and external clock nodes for rtc Keerthy
2015-08-13 7:07 ` [PATCH 2/2] rtc: omap: Add external clock enabling support Keerthy
[not found] ` <1439449668-32301-3-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2015-08-14 8:33 ` Alexandre Belloni
[not found] ` <20150814083319.GG22269-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>
2015-08-14 8:36 ` Vaibhav Hiremath [this message]
2015-08-14 10:54 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55CDA89C.1080407@linaro.org \
--to=vaibhav.hiremath-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=grygorii.strashko-l0cyMroinI0@public.gmane.org \
--cc=j-keerthy-l0cyMroinI0@public.gmane.org \
--cc=johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=t-kristo-l0cyMroinI0@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).