Re: [PATCH 2/6] ARM: dts: sun7i: Enable i2c bus 1 and 2 on the Wits A20 Pro DKT

[Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]

Hi Maxime,

On 14-08-15 16:44, Hans de Goede wrote:
> Enable i2c bus 1 and 2 on the Wits A20 Pro DKT, these are used for
> the touchscreen resp. the accelerometer.
>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Erm, please skip this one it depends on another patch
(which adds the sun7i-a20-wits-pro-a20-dkt.dts), which
I've not submitted yet as it depends on the axp
usb-power-supply driver.

So as said please skip this one, I've squashed it into
the patch adding the dts file, which I will submit
later.

Regards,

Hans



> ---
>   arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 12 ++++++++++++
>   1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
> index da47608..85b500d 100644
> --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
> @@ -92,6 +92,18 @@
>   	};
>   };
>
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins_a>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins_a>;
> +	status = "okay";
> +};
> +
>   #include "axp209.dtsi"
>
>   &mmc0 {
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html