From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Subject: Re: [PATCH v5 3/3] ARM: bcm2835: Add DT for the firmware clocks driver. Date: Fri, 14 Aug 2015 22:13:31 -0600 Message-ID: <55CEBC6B.9070001@wwwdotorg.org> References: <1439507142-2965-1-git-send-email-eric@anholt.net> <1439507142-2965-4-git-send-email-eric@anholt.net> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1439507142-2965-4-git-send-email-eric@anholt.net> Sender: linux-kernel-owner@vger.kernel.org To: Eric Anholt Cc: linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rpi-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Lee Jones , Stephen Boyd , Mike Turquette , devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On 08/13/2015 05:05 PM, Eric Anholt wrote: > Signed-off-by: Eric Anholt > Acked-by: Lee Jones A patch description might be nice, although admittedly the subject seems clear enough. > diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi > + firmware_clocks: firmware-clocks { > + compatible = "raspberrypi,bcm2835-firmware-clocks"; > + #clock-cells = <1>; > + raspberrypi,firmware = <&firmware>; > + }; No need to resend for this, but just a background note: DT node names usually contain a device type not a device identity, so "clocks" not "firmware-clocks" would be typical. This patch, Acked-by: Stephen Warren