[PATCH 3/4] ARM: dts: Add UART2 dt node for Exynos3250 SoC

Chanwoo Choi
2015-08-11T03:46:23Z

This patch add the uart2 devicetree node for Exynos3250 SoC.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 7 +++++++
arch/arm/boot/dts/exynos3250.dtsi | 12 ++++++++++++
2 files changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 5ab81c39e2c9..eac1d21c10d4 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -120,6 +120,13 @@
samsung,pin-drv = <0>;
};

+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
i2c3_bus: i2c3-bus {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <3>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 2db99433e17f..02f3250766c9 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -42,6 +42,7 @@
i2c7 = &i2c_7;
serial0 = &serial_0;
serial1 = &serial_1;
+ serial2 = &serial_2;
};

cpus {
@@ -435,6 +436,17 @@
status = "disabled";
};

+ serial_2: serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 111 0>;
+ clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_data>;
+ status = "disabled";
+ };
+
i2c_0: i2c@13860000 {
#address-cells = <1>;
#size-cells = <0>;
--
1.8.5.5