From: vikas <vikas.manocha-qxv4g6HH51o@public.gmane.org>
To: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>,
"linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Graham Moore
<grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
Alan Tull
<atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Dinh Nguyen
<dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
Yves Vandervennet
<yvanderv-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH V7 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.
Date: Mon, 17 Aug 2015 19:35:55 -0700 [thread overview]
Message-ID: <55D29A0B.20408@st.com> (raw)
In-Reply-To: <1439522892-7524-1-git-send-email-marex-ynQEQJNshbs@public.gmane.org>
Hi Marek,
On 08/13/2015 08:28 PM, Marek Vasut wrote:
> From: Graham Moore <grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
>
> Add binding document for the Cadence QSPI controller.
>
> Signed-off-by: Graham Moore <grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
> Cc: Alan Tull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> Cc: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
> Cc: Dinh Nguyen <dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> Cc: Graham Moore <grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> Cc: Vikas MANOCHA <vikas.manocha-qxv4g6HH51o@public.gmane.org>
> Cc: Yves Vandervennet <yvanderv-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> ---
> .../devicetree/bindings/mtd/cadence_quadspi.txt | 50 ++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
>
> V2: Add cdns prefix to driver-specific bindings.
> V3: Use existing property "is-decoded-cs" instead of creating a
> duplicate, "ext-decoder". Timing parameters are in nanoseconds,
> not master reference clocks. Remove bus-num completely.
> V4: Add new properties fifo-width and trigger-address
> V7: - Prefix all of the Cadence-specific properties with cdns prefix,
> those are in particular "cdns,is-decoded-cs", "cdns,fifo-depth",
> "cdns,fifo-width", "cdns,trigger-address".
> - Drop bogus properties which were not used and were incorrect.
>
> diff --git a/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
> new file mode 100644
> index 0000000..ebaf1fd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
> @@ -0,0 +1,50 @@
> +* Cadence Quad SPI controller
> +
> +Required properties:
> +- compatible : Should be "cdns,qspi-nor".
> +- reg : Contains two entries, each of which is a tuple consisting of a
> + physical address and length. The first entry is the address and
> + length of the controller register set. The second entry is the
> + address and length of the QSPI Controller data area.
"Controller data area", i think it means mapped NOR Flash address ?
If yes, it would be more clear with "Physical base address & size of NOR Flash".
> +- interrupts : Unit interrupt specifier for the controller interrupt.
> +- clocks : phandle to the Quad SPI clock.
> +- cdns,fifo-depth : Size of the data FIFO in words.
It actually is sram-depth, better would be "sram-depth" to avoid confusion.
> +- cdns,fifo-width: Bus width of the data FIFO in bytes.
> +- cdns,trigger-address : 32-bit indirect AHB trigger address.
we might make trigger-address also part of property "reg".
> +
> +Optional properties:
> +- cdns,is-decoded-cs : Flag to indicate whether decoder is used or not.
Not clear about the usage of decoder, if it does not make sense we might remove it from driver.
> +
> +Optional subnodes:
I think flash subnode is mandatory.
Rgds,
Vikas
> +Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
> +custom properties:
> +- cdns,read-delay : Delay for read capture logic, in clock cycles
> +- cdns,tshsl-ns : Delay in nanoseconds for the length that the master mode chip select outputs are de-asserted between transactions.
> +- cdns,tsd2d-ns : Delay in nanoseconds between one chip select being de-activated and the activation of another.
> +- cdns,tchsh-ns : Delay in nanoseconds between last bit of current transaction and deasserting the device chip select (qspi_n_ss_out).
> +- cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low and first bit transfer.
> +
> +Example:
> +
> + qspi: spi@ff705000 {
> + compatible = "cdns,qspi-nor";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xff705000 0x1000>,
> + <0xffa00000 0x1000>;
> + interrupts = <0 151 4>;
> + clocks = <&qspi_clk>;
> + cdns,is-decoded-cs;
> + cdns,fifo-depth = <128>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x00000000>;
> +
> + flash0: n25q00@0 {
> + ...
> + cdns,read-delay = <4>;
> + cdns,tshsl-ns = <50>;
> + cdns,tsd2d-ns = <50>;
> + cdns,tchsh-ns = <4>;
> + cdns,tslch-ns = <4>;
> + };
> + };
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-08-18 2:35 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-14 3:28 [PATCH V7 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver Marek Vasut
[not found] ` <1439522892-7524-1-git-send-email-marex-ynQEQJNshbs@public.gmane.org>
2015-08-14 3:28 ` [PATCH V7 2/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller Marek Vasut
[not found] ` <1439522892-7524-2-git-send-email-marex-ynQEQJNshbs@public.gmane.org>
2015-08-14 3:32 ` Marek Vasut
[not found] ` <201508140532.34935.marex-ynQEQJNshbs@public.gmane.org>
2015-08-18 2:47 ` Brian Norris
2015-08-21 5:32 ` Marek Vasut
2015-08-18 2:34 ` vikas
2015-08-18 19:17 ` Graham Moore
[not found] ` <55D384D6.9040303-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2015-08-18 20:35 ` vikas
[not found] ` <55D299CD.2070809-qxv4g6HH51o@public.gmane.org>
2015-08-21 4:04 ` Marek Vasut
[not found] ` <201508210604.30272.marex-ynQEQJNshbs@public.gmane.org>
2015-08-21 7:09 ` Vikas MANOCHA
2015-08-18 2:35 ` vikas [this message]
[not found] ` <55D29A0B.20408-qxv4g6HH51o@public.gmane.org>
2015-08-18 4:47 ` [PATCH V7 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver Marek Vasut
[not found] ` <201508180647.30119.marex-ynQEQJNshbs@public.gmane.org>
2015-08-18 5:48 ` Vikas MANOCHA
2015-08-18 19:03 ` Graham Moore
[not found] ` <55D3819D.1040009-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2015-08-18 20:18 ` vikas
[not found] ` <55D39319.70108-qxv4g6HH51o@public.gmane.org>
2015-08-20 4:03 ` Marek Vasut
[not found] ` <201508200603.19962.marex-ynQEQJNshbs@public.gmane.org>
2015-08-20 16:06 ` vikas
[not found] ` <55D5FB19.9010402-qxv4g6HH51o@public.gmane.org>
2015-08-21 3:46 ` Marek Vasut
[not found] ` <201508210546.28932.marex-ynQEQJNshbs@public.gmane.org>
2015-08-21 7:00 ` Vikas MANOCHA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55D29A0B.20408@st.com \
--to=vikas.manocha-qxv4g6hh51o@public.gmane.org \
--cc=atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
--cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
--cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
--cc=yvanderv-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).