Re: [PATCH V7 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.

[Graham Moore <grmoore@opensource.altera.com>]

Hi all,

On 08/18/2015 12:48 AM, Vikas MANOCHA wrote:

[...]

>>>> +Required properties:
>>>> +- compatible : Should be "cdns,qspi-nor".
>>>> +- reg : Contains two entries, each of which is a tuple consisting of a
>>>> +    physical address and length.  The first entry is the address and
>>>> +    length of the controller register set.  The second entry is the
>>>> +    address and length of the QSPI Controller data area.
>>>
>>> "Controller data area", i think it means mapped NOR Flash address ?
>>
>> Probably ; Graham ?
>>
>>> If yes, it would be more clear with "Physical base address & size of NOR
>>> Flash".
>>
>> This is the Direct mode thing, correct ? We don't support this, so I think
>> we should drop this bit altogether and keep only one single address in this
>> field.
>
> No it's not.
>

It's the location of the SRAM fifo.  Also direct mode location I think, 
if that were ever used.

The size is determined by a configuration parameter during system 
design.  On Altera Cyclone5 the size is really big compared to SRAM 
fifo.  I don't know why, maybe some hw engineer thought it would be 
better to have a large size in case direct mode was used.

BR,
Graham

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/