[PATCH 0/6] ARM: dts: sunxi: Various sunxi devicetree patches

[PATCH 0/6] ARM: dts: sunxi: Various sunxi devicetree patches

[Hans de Goede]

Hi Maxime,

Here is a bunch of sunxi dts patches which are ready for merging, some
are the result of the course I'm teaching during the weekends, some are
my own :)

I'm also sitting on another batch, which can go in as soon as the
axp209 usb-power-supply driver gets merged, so that we can support
otg on boards which use the pmic for vbus-det.

Regards,

Hans

[PATCH 1/6] ARM: dts: sun5i: Add simplefb node for tvencoder output

[Hans de Goede]

Add a simplefb node for tvencoder / composite-video output, such as found
on the Auxtek-T003 and the CHIP.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun5i-a10s.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index a6d55f0..3e47b3d 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -77,6 +77,15 @@
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
 			status = "disabled";
 		};
+
+		framebuffer@2 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/6] ARM: dts: sun5i: Add simplefb node for tvencoder output

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 467 bytes --]

Hi, 

On Fri, Aug 14, 2015 at 04:44:32PM +0200, Hans de Goede wrote:
> Add a simplefb node for tvencoder / composite-video output, such as found
> on the Auxtek-T003 and the CHIP.
> 
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Queued, thanks!

I guess the CHIP will have to have the same change for the A13 DTSI.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH 2/6] ARM: dts: sun7i: Enable i2c bus 1 and 2 on the Wits A20 Pro DKT

[Hans de Goede]

Enable i2c bus 1 and 2 on the Wits A20 Pro DKT, these are used for
the touchscreen resp. the accelerometer.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
index da47608..85b500d 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -92,6 +92,18 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
 #include "axp209.dtsi"
 
 &mmc0 {
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/6] ARM: dts: sun7i: Enable i2c bus 1 and 2 on the Wits A20 Pro DKT

[Hans de Goede]

Hi Maxime,

On 14-08-15 16:44, Hans de Goede wrote:
> Enable i2c bus 1 and 2 on the Wits A20 Pro DKT, these are used for
> the touchscreen resp. the accelerometer.
>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Erm, please skip this one it depends on another patch
(which adds the sun7i-a20-wits-pro-a20-dkt.dts), which
I've not submitted yet as it depends on the axp
usb-power-supply driver.

So as said please skip this one, I've squashed it into
the patch adding the dts file, which I will submit
later.

Regards,

Hans



> ---
>   arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 12 ++++++++++++
>   1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
> index da47608..85b500d 100644
> --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
> @@ -92,6 +92,18 @@
>   	};
>   };
>
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins_a>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins_a>;
> +	status = "okay";
> +};
> +
>   #include "axp209.dtsi"
>
>   &mmc0 {
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 3/6] ARM: dts: sun7i: Add regulator configuration to the pcduino3 dts file

[Hans de Goede]

From: Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>

Add regulator configuration to the pcduino3 dts file.

Signed-off-by: Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 39 ++++++++++++++++++++++++++++----
 1 file changed, 35 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index afc9ece..99e238b 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -111,6 +111,10 @@
 	allwinner,pins = "PH2";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -137,16 +141,14 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
+#include "axp209.dtsi"
+
 &ir0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir0_rx_pins_a>;
@@ -192,6 +194,31 @@
 	status = "okay";
 };
 
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -206,6 +233,10 @@
 	status = "okay";
 };
 
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/6] ARM: dts: sun7i: Add regulator configuration to the pcduino3 dts file

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 474 bytes --]

On Fri, Aug 14, 2015 at 04:44:34PM +0200, Hans de Goede wrote:
> From: Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>
> 
> Add regulator configuration to the pcduino3 dts file.
> 
> Signed-off-by: Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Queued, thanks!

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH 4/6] ARM: dts: sun7i: Enable USB DRC on pcDuino 3

[Hans de Goede]

From: Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>

Enable the otg/drc usb controller on the pcDuino 3.

Note this board has the otg-vbus connected directly to the 5v-dcc of
the board, so there is no vbus0 regulator, nor vbus0-det.

Signed-off-by: Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 99e238b..08cf715 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -173,6 +173,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_pcduino3: led_pins@0 {
 		allwinner,pins = "PH15", "PH16";
@@ -187,6 +191,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_ahci_5v {
@@ -237,7 +248,15 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
-- 
2.4.3

Re: [PATCH 4/6] ARM: dts: sun7i: Enable USB DRC on pcDuino 3

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 559 bytes --]

On Fri, Aug 14, 2015 at 04:44:35PM +0200, Hans de Goede wrote:
> From: Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>
> 
> Enable the otg/drc usb controller on the pcDuino 3.
> 
> Note this board has the otg-vbus connected directly to the 5v-dcc of
> the board, so there is no vbus0 regulator, nor vbus0-det.

Can it do OTG then? If VBUS is tied to the 5v, there's no way for the
board to shut it down when acting as peripheral, right?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Re: [linux-sunxi] Re: [PATCH 4/6] ARM: dts: sun7i: Enable USB DRC on pcDuino 3

[Hans de Goede]

Hi,

On 08/20/2015 08:45 AM, Maxime Ripard wrote:
> On Fri, Aug 14, 2015 at 04:44:35PM +0200, Hans de Goede wrote:
>> From: Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>
>>
>> Enable the otg/drc usb controller on the pcDuino 3.
>>
>> Note this board has the otg-vbus connected directly to the 5v-dcc of
>> the board, so there is no vbus0 regulator, nor vbus0-det.
>
> Can it do OTG then?

Yes.

> If VBUS is tied to the 5v, there's no way for the
> board to shut it down when acting as peripheral, right?

Correct, the idea is to power it over otg when using it
as a peripheral, or at least power it from a usb port of
the machine for which it is a peripheral. Note that the
original cubieboard (both A10 and A20 versions) have the
same issue.

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Re: [PATCH 4/6] ARM: dts: sun7i: Enable USB DRC on pcDuino 3

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1019 bytes --]

On Thu, Aug 20, 2015 at 09:36:33AM +0200, Hans de Goede wrote:
> Hi,
> 
> On 08/20/2015 08:45 AM, Maxime Ripard wrote:
> >On Fri, Aug 14, 2015 at 04:44:35PM +0200, Hans de Goede wrote:
> >>From: Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>
> >>
> >>Enable the otg/drc usb controller on the pcDuino 3.
> >>
> >>Note this board has the otg-vbus connected directly to the 5v-dcc of
> >>the board, so there is no vbus0 regulator, nor vbus0-det.
> >
> >Can it do OTG then?
> 
> Yes.
> 
> >If VBUS is tied to the 5v, there's no way for the
> >board to shut it down when acting as peripheral, right?
> 
> Correct, the idea is to power it over otg when using it
> as a peripheral, or at least power it from a usb port of
> the machine for which it is a peripheral. Note that the
> original cubieboard (both A10 and A20 versions) have the
> same issue.

Hmmm, I see. I'll queue your patch then.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH 5/6] ARM: dts: sun7i: Enable USB DRC on cubieboard2

[Hans de Goede]

From: Ralph Benadski <benadski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Enable the otg/drc usb controller on the cubieboard2.

Note this board has the otg-vbus connected directly to the 5v-dcc of
the board, so there is no vbus0 regulator, nor vbus0-det.

Signed-off-by: Ralph Benadski <benadski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index f35957d..7cbb22b 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -207,6 +207,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_cubieboard2: led_pins@0 {
 		allwinner,pins = "PH20", "PH21";
@@ -214,12 +218,24 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_ahci_5v {
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 #include "axp209.dtsi"
 
 &reg_dcdc2 {
@@ -262,6 +278,9 @@
 };
 
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
-- 
2.4.3

Re: [PATCH 5/6] ARM: dts: sun7i: Enable USB DRC on cubieboard2

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 630 bytes --]

On Fri, Aug 14, 2015 at 04:44:36PM +0200, Hans de Goede wrote:
> From: Ralph Benadski <benadski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> Enable the otg/drc usb controller on the cubieboard2.
> 
> Note this board has the otg-vbus connected directly to the 5v-dcc of
> the board, so there is no vbus0 regulator, nor vbus0-det.
> 
> Signed-off-by: Ralph Benadski <benadski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Queued, thanks!

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH 6/6] ARM: dts: sun8i: Add support for qt90h-v4 tablets

[Hans de Goede]

The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM
and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot.

This commit adds a dts for v4 of the gt90h pcb.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/Makefile               |   1 +
 arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts | 145 +++++++++++++++++++++++++++++++
 2 files changed, 146 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d639774..6aa657f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -600,6 +600,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-wits-pro-a20-dkt.dtb
 dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
 	sun8i-a23-ippo-q8h-v5.dtb \
 	sun8i-a23-ippo-q8h-v1.2.dtb \
 	sun8i-a33-et-q8-v1.6.dtb \
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
new file mode 100644
index 0000000..1aeb06c
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Allwinner GT90H Quad Core Tablet (v4)";
+	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button@600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
+	/* FIXME this really is aldo1, correct once we've pmic support */
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 6/6] ARM: dts: sun8i: Add support for qt90h-v4 tablets

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 480 bytes --]

On Fri, Aug 14, 2015 at 04:44:37PM +0200, Hans de Goede wrote:
> The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM
> and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot.
> 
> This commit adds a dts for v4 of the gt90h pcb.
> 
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Applied, thanks!

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com