Re: [PATCH 2/5] ARM: NSP: add minimal Northstar Plus device tree

[Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>]

Hi Olof,

Comments inline.

On 15-08-25 04:36 PM, Olof Johansson wrote:
> Hi,
>
> I'm not sure what the strategy behind your cc:ing on this patch set
> is. I only got a couple of them in my inbox, and this one wasn't one
> of them. :)
>
> On Thu, Aug 20, 2015 at 10:46 AM, Jon Mason <jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> wrote:
>> Add a very minimalistic set of Northstar Plus Device Tree files which
>> describes the SoC and the BCM958625 implementation.  The perpherials
>> described are:
>>
>> ARM Cortex A9 CPU
>> 2 8250 UARTs
>> ARM GIC
>> PL310 L2 Cache
>> ARM A9 Global timer
>>
>> Signed-off-by: Jon Mason <jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>> Signed-off-by: Kapil Hali <kapilh-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>> Reviewed-by: Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>> Reviewed-by: Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>
> Seeing reviewed-by already attached to a v1 of a patchset has limited
> value for someone on the outside.

>
> Reviewed-by is one of those tags that has a value that's mostly
> dependent on who it comes from. By not actually seeing the review and
> the feedback provided (and revisions made), less data is provided to
> tell if it's a valuable review or not.
should we start using Ack'd instead then for things that were reviewed 
internally?
>
> Also, if you're posting the code you should probably have your name
> below Kapil's, since you're the one signing off the origin of the
> code. See Documentation/SubmittingPatches.txt for details on what
> S-o-b actually means.
>
>
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/bcm-nsp.dtsi
>> @@ -0,0 +1,105 @@
>> +/*
>> + *  BSD LICENSE
>> + *
>> + *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
>> + *
>> + *  Redistribution and use in source and binary forms, with or without
>> + *  modification, are permitted provided that the following conditions
>> + *  are met:
>> + *
>> + *    * Redistributions of source code must retain the above copyright
>> + *      notice, this list of conditions and the following disclaimer.
>> + *    * Redistributions in binary form must reproduce the above copyright
>> + *      notice, this list of conditions and the following disclaimer in
>> + *      the documentation and/or other materials provided with the
>> + *      distribution.
>> + *    * Neither the name of Broadcom Corporation nor the names of its
>> + *      contributors may be used to endorse or promote products derived
>> + *      from this software without specific prior written permission.
>> + *
>> + *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
>> + *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
>> + *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
>> + *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
>> + *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
>> + *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
>> + *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
>> + *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
>> + *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>> + *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>> + *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> + */
>
> I'm not sure we've seen BSD-only submissions before. I'll let DT
> maintainers (or Ian) speak up in case this would cause problems.
>

Arnd is the one who require new DT content to be BSD licensed.
We're just following his orders:

http://lkml.iu.edu/hypermail/linux/kernel/1411.1/01109.html

>
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +
>> +#include "skeleton.dtsi"
>> +
>> +/ {
>> +       compatible = "brcm,nsp";
>> +       model = "Broadcom Northstar Plus SoC";
>> +       interrupt-parent = <&gic>;
>> +
>> +       cpus {
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +
>> +               cpu@0 {
>> +                       device_type = "cpu";
>> +                       compatible = "arm,cortex-a9";
>> +                       next-level-cache = <&L2>;
>> +                       reg = <0x0>;
>> +               };
>> +       };
>> +
>> +       clocks {
>> +               #address-cells = <1>;
>> +               #size-cells = <1>;
>> +               ranges;
>> +
>> +               periph_clk: periph_clk {
>> +                       compatible = "fixed-clock";
>> +                       #clock-cells = <0>;
>> +                       clock-frequency = <500000000>;
>> +               };
>> +       };
>> +
>> +       uart0: serial@18000300 {
>> +               compatible = "ns16550a";
>> +               reg = <0x18000300 0x100>;
>> +               interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
>> +               clock-frequency = <62499840>;
>> +               status = "disabled";
>> +       };
>> +
>> +       uart1: serial@18000400 {
>> +               compatible = "ns16550a";
>> +               reg = <0x18000400 0x100>;
>> +               interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
>> +               clock-frequency = <62499840>;
>> +               status = "disabled";
>> +       };
>> +
>> +       gic: interrupt-controller@19021000 {
>> +               compatible = "arm,cortex-a9-gic";
>> +               #interrupt-cells = <3>;
>> +               #address-cells = <0>;
>> +               interrupt-controller;
>> +               reg = <0x19021000 0x1000>,
>> +                     <0x19020100 0x100>;
>> +       };
>> +
>> +       L2: l2-cache {
>> +               compatible = "arm,pl310-cache";
>> +               reg = <0x19022000 0x1000>;
>> +               cache-unified;
>> +               cache-level = <2>;
>> +       };
>> +
>> +       timer@19020200 {
>> +               compatible = "arm,cortex-a9-global-timer";
>> +               reg = <0x19020200 0x100>;
>> +               interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> +               clocks = <&periph_clk>;
>> +       };
>> +};
>> diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
>> new file mode 100644
>> index 0000000..a1bc151
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/bcm958625k.dts
>> @@ -0,0 +1,57 @@
>> +/*
>> + *  BSD LICENSE
>> + *
>> + *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
>> + *
>> + *  Redistribution and use in source and binary forms, with or without
>> + *  modification, are permitted provided that the following conditions
>> + *  are met:
>> + *
>> + *    * Redistributions of source code must retain the above copyright
>> + *      notice, this list of conditions and the following disclaimer.
>> + *    * Redistributions in binary form must reproduce the above copyright
>> + *      notice, this list of conditions and the following disclaimer in
>> + *      the documentation and/or other materials provided with the
>> + *      distribution.
>> + *    * Neither the name of Broadcom Corporation nor the names of its
>> + *      contributors may be used to endorse or promote products derived
>> + *      from this software without specific prior written permission.
>> + *
>> + *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
>> + *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
>> + *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
>> + *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
>> + *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
>> + *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
>> + *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
>> + *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
>> + *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>> + *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>> + *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "bcm-nsp.dtsi"
>> +
>> +/ {
>> +       model = "NorthStar Plus SVK (BCM958625K)";
>> +       compatible = "brcm,bcm58625", "brcm,nsp";
>> +
>> +       aliases {
>> +               serial0 = &uart0;
>> +               serial1 = &uart1;
>> +       };
>> +
>> +       chosen {
>> +               stdout-path = "serial0:115200n8";
>> +       };
>
> No way to mount a root filesystem yet? How much work remains for that
> to be possible, and what's the plan for that?
>
This is the bare bones DTS.  I'm sure Jon will activate NAND once tested 
- it "should" work with the same driver that Cygnus and STB chips use.

>> +
>> +       uart0: serial@18000300 {
>> +               status = "okay";
>> +       };
>> +
>> +       uart1: serial@18000400 {
>> +               status = "okay";
>> +       };
>
> I recommend using labels here instead so you don't have to mirror the
> DT layout to get the updated property right.
>
> I.e.
>
> &uart1 {
>          status = "okay";
> };
>
>
>
> -Olof
>

Regards,
  Scott
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html