[PATCH v2 0/2] watchdog: driver for BCM7038 and newer chips.

[PATCH v2 0/2] watchdog: driver for BCM7038 and newer chips.

[Justin Chen]

This driver is for a watchdog block contained in all Broadcom Set-top
Box chips since BCM7038. BCM7038 was made public during the 2004 CES,
and since then, many chips use this watchdog block including some cable
modem chips.

Changes since v1:
Removed clock-frequency because it brought unnecessary complexity to the
driver.
Renamed a few variables.

Patch 1: watchdog device tree binding documentation

Patch 2: watchdog driver

Justin Chen (2):
  watchdog: bcm7038: add device tree binding documentation
  watchdog: Watchdog driver for Broadcom Set-Top Box

 .../bindings/watchdog/brcm,bcm7038-wdt.txt         |  19 ++
 drivers/watchdog/Kconfig                           |   8 +
 drivers/watchdog/Makefile                          |   1 +
 drivers/watchdog/bcm7038_wdt.c                     | 235 +++++++++++++++++++++
 4 files changed, 263 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
 create mode 100644 drivers/watchdog/bcm7038_wdt.c

-- 
2.1.0

[PATCH v2 1/2] watchdog: bcm7038: add device tree binding documentation

[Justin Chen]

Add device tree binding documentation for the watchdog hardware block
on bcm7038 and newer SoCs.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
---
 .../devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
new file mode 100644
index 0000000..39e5cf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
@@ -0,0 +1,19 @@
+BCM7038 Watchdog timer
+
+Required properties:
+
+- compatible : should be "brcm,bcm7038-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Optional properties:
+
+- clocks: The clock running the watchdog. If no clock is found the
+	  driver will default to 27000000 HZ.
+
+Example:
+
+watchdog {
+	compatible = "brcm,bcm7038-wdt";
+	clocks = <&upg_fixed>;
+	reg = <0xf040a7e8 0x16>;
+};
-- 
2.1.0

[PATCH v2 2/2] watchdog: Watchdog driver for Broadcom Set-Top Box

[Justin Chen]

Watchdog driver for Broadcom 7038 and newer chips.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
---
 drivers/watchdog/Kconfig       |   8 ++
 drivers/watchdog/Makefile      |   1 +
 drivers/watchdog/bcm7038_wdt.c | 235 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 244 insertions(+)
 create mode 100644 drivers/watchdog/bcm7038_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 241fafd..4fbe8ab 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1291,6 +1291,14 @@ config BCM_KONA_WDT_DEBUG
 
 	  If in doubt, say 'N'.
 
+config BCM7038_WDT
+	tristate "BCM7038 Watchdog"
+	select WATCHDOG_CORE
+	help
+	 Watchdog driver for the built-in hardware in Broadcom 7038 SoCs.
+
+	 Say 'Y or 'M' here to enable the driver.
+
 config IMGPDC_WDT
 	tristate "Imagination Technologies PDC Watchdog Timer"
 	depends on HAS_IOMEM
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 59ea9a1..65d4169 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
 obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
 obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
 obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
+obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c
new file mode 100644
index 0000000..5e54c1b
--- /dev/null
+++ b/drivers/watchdog/bcm7038_wdt.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/watchdog.h>
+
+#define WDT_START_1		0xff00
+#define WDT_START_2		0x00ff
+#define WDT_STOP_1		0xee00
+#define WDT_STOP_2		0x00ee
+
+#define WDT_TIMEOUT_REG		0x0
+#define WDT_CMD_REG		0x4
+
+#define WDT_MIN_TIMEOUT		1 /* seconds */
+#define WDT_DEFAULT_TIMEOUT	30 /* seconds */
+#define WDT_DEFAULT_RATE	27000000
+
+struct bcm7038_watchdog {
+	void __iomem		*base;
+	struct watchdog_device	wdd;
+	u32			rate;
+	struct clk		*clk;
+};
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+static void bcm7038_wdt_set_timeout_reg(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+	u32 timeout;
+
+	timeout = wdt->rate * wdog->timeout;
+
+	writel(timeout, wdt->base + WDT_TIMEOUT_REG);
+}
+
+static int bcm7038_wdt_ping(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+
+	writel(WDT_START_1, wdt->base + WDT_CMD_REG);
+	writel(WDT_START_2, wdt->base + WDT_CMD_REG);
+
+	return 0;
+}
+
+static int bcm7038_wdt_start(struct watchdog_device *wdog)
+{
+	bcm7038_wdt_set_timeout_reg(wdog);
+	bcm7038_wdt_ping(wdog);
+
+	return 0;
+}
+
+static int bcm7038_wdt_stop(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+
+	writel(WDT_STOP_1, wdt->base + WDT_CMD_REG);
+	writel(WDT_STOP_2, wdt->base + WDT_CMD_REG);
+
+	return 0;
+}
+
+static int bcm7038_wdt_set_timeout(struct watchdog_device *wdog,
+				   unsigned int t)
+{
+	/* Can't modify timeout value if watchdog timer is running */
+	bcm7038_wdt_stop(wdog);
+	wdog->timeout = t;
+	bcm7038_wdt_start(wdog);
+
+	return 0;
+}
+
+static unsigned int bcm7038_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+	u32 time_left;
+
+	time_left = readl(wdt->base + WDT_CMD_REG);
+
+	return time_left / wdt->rate;
+}
+
+static struct watchdog_info bcm7038_wdt_info = {
+	.identity	= "Broadcom BCM7038 Watchdog Timer",
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+				WDIOF_MAGICCLOSE
+};
+
+static struct watchdog_ops bcm7038_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= bcm7038_wdt_start,
+	.stop		= bcm7038_wdt_stop,
+	.set_timeout	= bcm7038_wdt_set_timeout,
+	.get_timeleft	= bcm7038_wdt_get_timeleft,
+};
+
+static int bcm7038_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm7038_watchdog *wdt;
+	struct resource *res;
+	int err;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, wdt);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	wdt->clk = devm_clk_get(dev, NULL);
+	/* If unable to get clock, use default frequency */
+	if (!IS_ERR(wdt->clk)) {
+		clk_prepare_enable(wdt->clk);
+		wdt->rate = clk_get_rate(wdt->clk);
+		/* Prevent divide-by-zero exception */
+		if (!wdt->rate)
+			wdt->rate = WDT_DEFAULT_RATE;
+	} else {
+		wdt->rate = WDT_DEFAULT_RATE;
+	}
+
+	wdt->wdd.info		= &bcm7038_wdt_info;
+	wdt->wdd.ops		= &bcm7038_wdt_ops;
+	wdt->wdd.min_timeout	= WDT_MIN_TIMEOUT;
+	wdt->wdd.timeout	= WDT_DEFAULT_TIMEOUT;
+	wdt->wdd.max_timeout	= 0xffffffff / wdt->rate;
+	wdt->wdd.parent		= dev;
+	watchdog_set_drvdata(&wdt->wdd, wdt);
+
+	err = watchdog_register_device(&wdt->wdd);
+	if (err) {
+		dev_err(dev, "Failed to register watchdog device\n");
+		return err;
+	}
+
+	dev_info(dev, "Registered BCM7038 Watchdog\n");
+
+	return 0;
+}
+
+static int bcm7038_wdt_remove(struct platform_device *pdev)
+{
+	struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
+
+	if (!nowayout)
+		bcm7038_wdt_stop(&wdt->wdd);
+
+	watchdog_unregister_device(&wdt->wdd);
+	clk_disable_unprepare(wdt->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bcm7038_wdt_suspend(struct device *dev)
+{
+	struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		return bcm7038_wdt_stop(&wdt->wdd);
+
+	return 0;
+}
+
+static int bcm7038_wdt_resume(struct device *dev)
+{
+	struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		return bcm7038_wdt_start(&wdt->wdd);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_ops, bcm7038_wdt_suspend,
+			 bcm7038_wdt_resume);
+
+static void bcm7038_wdt_shutdown(struct platform_device *pdev)
+{
+	struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
+
+	if (watchdog_active(&wdt->wdd))
+		bcm7038_wdt_stop(&wdt->wdd);
+}
+
+static const struct of_device_id bcm7038_wdt_match[] = {
+	{ .compatible = "brcm,bcm7038-wdt" },
+	{},
+};
+
+static struct platform_driver bcm7038_wdt_driver = {
+	.probe		= bcm7038_wdt_probe,
+	.remove		= bcm7038_wdt_remove,
+	.shutdown	= bcm7038_wdt_shutdown,
+	.driver		= {
+		.name		= "bcm7038-wdt",
+		.of_match_table	= bcm7038_wdt_match,
+		.pm		= &bcm7038_wdt_pm_ops,
+	}
+};
+module_platform_driver(bcm7038_wdt_driver);
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Driver for Broadcom 7038 SoCs Watchdog");
+MODULE_AUTHOR("Justin Chen");
-- 
2.1.0

[PATCH v2 2/2] watchdog: Watchdog driver for Broadcom Set-Top Box

[Gregory Fong]

Watchdog driver for Broadcom 7038 and newer chips.

Signed-off-by: Justin Chen <justinpopo6-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/watchdog/Kconfig       |   8 ++
 drivers/watchdog/Makefile      |   1 +
 drivers/watchdog/bcm7038_wdt.c | 235 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 244 insertions(+)
 create mode 100644 drivers/watchdog/bcm7038_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 241fafd..4fbe8ab 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1291,6 +1291,14 @@ config BCM_KONA_WDT_DEBUG
 
 	  If in doubt, say 'N'.
 
+config BCM7038_WDT
+	tristate "BCM7038 Watchdog"
+	select WATCHDOG_CORE
+	help
+	 Watchdog driver for the built-in hardware in Broadcom 7038 SoCs.
+
+	 Say 'Y or 'M' here to enable the driver.
+
 config IMGPDC_WDT
 	tristate "Imagination Technologies PDC Watchdog Timer"
 	depends on HAS_IOMEM
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 59ea9a1..65d4169 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
 obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
 obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
 obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
+obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c
new file mode 100644
index 0000000..5e54c1b
--- /dev/null
+++ b/drivers/watchdog/bcm7038_wdt.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/watchdog.h>
+
+#define WDT_START_1		0xff00
+#define WDT_START_2		0x00ff
+#define WDT_STOP_1		0xee00
+#define WDT_STOP_2		0x00ee
+
+#define WDT_TIMEOUT_REG		0x0
+#define WDT_CMD_REG		0x4
+
+#define WDT_MIN_TIMEOUT		1 /* seconds */
+#define WDT_DEFAULT_TIMEOUT	30 /* seconds */
+#define WDT_DEFAULT_RATE	27000000
+
+struct bcm7038_watchdog {
+	void __iomem		*base;
+	struct watchdog_device	wdd;
+	u32			rate;
+	struct clk		*clk;
+};
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+static void bcm7038_wdt_set_timeout_reg(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+	u32 timeout;
+
+	timeout = wdt->rate * wdog->timeout;
+
+	writel(timeout, wdt->base + WDT_TIMEOUT_REG);
+}
+
+static int bcm7038_wdt_ping(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+
+	writel(WDT_START_1, wdt->base + WDT_CMD_REG);
+	writel(WDT_START_2, wdt->base + WDT_CMD_REG);
+
+	return 0;
+}
+
+static int bcm7038_wdt_start(struct watchdog_device *wdog)
+{
+	bcm7038_wdt_set_timeout_reg(wdog);
+	bcm7038_wdt_ping(wdog);
+
+	return 0;
+}
+
+static int bcm7038_wdt_stop(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+
+	writel(WDT_STOP_1, wdt->base + WDT_CMD_REG);
+	writel(WDT_STOP_2, wdt->base + WDT_CMD_REG);
+
+	return 0;
+}
+
+static int bcm7038_wdt_set_timeout(struct watchdog_device *wdog,
+				   unsigned int t)
+{
+	/* Can't modify timeout value if watchdog timer is running */
+	bcm7038_wdt_stop(wdog);
+	wdog->timeout = t;
+	bcm7038_wdt_start(wdog);
+
+	return 0;
+}
+
+static unsigned int bcm7038_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+	u32 time_left;
+
+	time_left = readl(wdt->base + WDT_CMD_REG);
+
+	return time_left / wdt->rate;
+}
+
+static struct watchdog_info bcm7038_wdt_info = {
+	.identity	= "Broadcom BCM7038 Watchdog Timer",
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+				WDIOF_MAGICCLOSE
+};
+
+static struct watchdog_ops bcm7038_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= bcm7038_wdt_start,
+	.stop		= bcm7038_wdt_stop,
+	.set_timeout	= bcm7038_wdt_set_timeout,
+	.get_timeleft	= bcm7038_wdt_get_timeleft,
+};
+
+static int bcm7038_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm7038_watchdog *wdt;
+	struct resource *res;
+	int err;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, wdt);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	wdt->clk = devm_clk_get(dev, NULL);
+	/* If unable to get clock, use default frequency */
+	if (!IS_ERR(wdt->clk)) {
+		clk_prepare_enable(wdt->clk);
+		wdt->rate = clk_get_rate(wdt->clk);
+		/* Prevent divide-by-zero exception */
+		if (!wdt->rate)
+			wdt->rate = WDT_DEFAULT_RATE;
+	} else {
+		wdt->rate = WDT_DEFAULT_RATE;
+	}
+
+	wdt->wdd.info		= &bcm7038_wdt_info;
+	wdt->wdd.ops		= &bcm7038_wdt_ops;
+	wdt->wdd.min_timeout	= WDT_MIN_TIMEOUT;
+	wdt->wdd.timeout	= WDT_DEFAULT_TIMEOUT;
+	wdt->wdd.max_timeout	= 0xffffffff / wdt->rate;
+	wdt->wdd.parent		= dev;
+	watchdog_set_drvdata(&wdt->wdd, wdt);
+
+	err = watchdog_register_device(&wdt->wdd);
+	if (err) {
+		dev_err(dev, "Failed to register watchdog device\n");
+		return err;
+	}
+
+	dev_info(dev, "Registered BCM7038 Watchdog\n");
+
+	return 0;
+}
+
+static int bcm7038_wdt_remove(struct platform_device *pdev)
+{
+	struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
+
+	if (!nowayout)
+		bcm7038_wdt_stop(&wdt->wdd);
+
+	watchdog_unregister_device(&wdt->wdd);
+	clk_disable_unprepare(wdt->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bcm7038_wdt_suspend(struct device *dev)
+{
+	struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		return bcm7038_wdt_stop(&wdt->wdd);
+
+	return 0;
+}
+
+static int bcm7038_wdt_resume(struct device *dev)
+{
+	struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		return bcm7038_wdt_start(&wdt->wdd);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_ops, bcm7038_wdt_suspend,
+			 bcm7038_wdt_resume);
+
+static void bcm7038_wdt_shutdown(struct platform_device *pdev)
+{
+	struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
+
+	if (watchdog_active(&wdt->wdd))
+		bcm7038_wdt_stop(&wdt->wdd);
+}
+
+static const struct of_device_id bcm7038_wdt_match[] = {
+	{ .compatible = "brcm,bcm7038-wdt" },
+	{},
+};
+
+static struct platform_driver bcm7038_wdt_driver = {
+	.probe		= bcm7038_wdt_probe,
+	.remove		= bcm7038_wdt_remove,
+	.shutdown	= bcm7038_wdt_shutdown,
+	.driver		= {
+		.name		= "bcm7038-wdt",
+		.of_match_table	= bcm7038_wdt_match,
+		.pm		= &bcm7038_wdt_pm_ops,
+	}
+};
+module_platform_driver(bcm7038_wdt_driver);
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Driver for Broadcom 7038 SoCs Watchdog");
+MODULE_AUTHOR("Justin Chen");
-- 
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/2] watchdog: bcm7038: add device tree binding documentation

[Gregory Fong]

Add device tree binding documentation for the watchdog hardware block
on bcm7038 and newer SoCs.

Signed-off-by: Justin Chen <justinpopo6-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 .../devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
new file mode 100644
index 0000000..39e5cf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
@@ -0,0 +1,19 @@
+BCM7038 Watchdog timer
+
+Required properties:
+
+- compatible : should be "brcm,bcm7038-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Optional properties:
+
+- clocks: The clock running the watchdog. If no clock is found the
+	  driver will default to 27000000 HZ.
+
+Example:
+
+watchdog {
+	compatible = "brcm,bcm7038-wdt";
+	clocks = <&upg_fixed>;
+	reg = <0xf040a7e8 0x16>;
+};
-- 
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/2] watchdog: Watchdog driver for Broadcom Set-Top Box

[Gregory Fong]

Gah, sorry, my email client did something really weird.  Sorry for the
duplication, please don't reply to those.

-- 
Gregory--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/2] watchdog: Watchdog driver for Broadcom Set-Top Box

[Guenter Roeck]

Hi Justin,

On Thu, Aug 27, 2015 at 03:53:24PM -0700, Justin Chen wrote:
> Watchdog driver for Broadcom 7038 and newer chips.
> 
> Signed-off-by: Justin Chen <justinpopo6-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Almost good. Two little but important details left ...

> ---
>  drivers/watchdog/Kconfig       |   8 ++
>  drivers/watchdog/Makefile      |   1 +
>  drivers/watchdog/bcm7038_wdt.c | 235 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 244 insertions(+)
>  create mode 100644 drivers/watchdog/bcm7038_wdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 241fafd..4fbe8ab 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1291,6 +1291,14 @@ config BCM_KONA_WDT_DEBUG
>  
>  	  If in doubt, say 'N'.
>  
> +config BCM7038_WDT
> +	tristate "BCM7038 Watchdog"
> +	select WATCHDOG_CORE
> +	help
> +	 Watchdog driver for the built-in hardware in Broadcom 7038 SoCs.
> +
> +	 Say 'Y or 'M' here to enable the driver.
> +
>  config IMGPDC_WDT
>  	tristate "Imagination Technologies PDC Watchdog Timer"
>  	depends on HAS_IOMEM
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 59ea9a1..65d4169 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -66,6 +66,7 @@ obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
>  obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
>  obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
>  obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
> +obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
>  
>  # AVR32 Architecture
>  obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
> diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c
> new file mode 100644
> index 0000000..5e54c1b
> --- /dev/null
> +++ b/drivers/watchdog/bcm7038_wdt.c
> @@ -0,0 +1,235 @@
> +/*
> + * Copyright (C) 2015 Broadcom Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/watchdog.h>
> +
> +#define WDT_START_1		0xff00
> +#define WDT_START_2		0x00ff
> +#define WDT_STOP_1		0xee00
> +#define WDT_STOP_2		0x00ee
> +
> +#define WDT_TIMEOUT_REG		0x0
> +#define WDT_CMD_REG		0x4
> +
> +#define WDT_MIN_TIMEOUT		1 /* seconds */
> +#define WDT_DEFAULT_TIMEOUT	30 /* seconds */
> +#define WDT_DEFAULT_RATE	27000000
> +
> +struct bcm7038_watchdog {
> +	void __iomem		*base;
> +	struct watchdog_device	wdd;
> +	u32			rate;
> +	struct clk		*clk;
> +};
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +
> +static void bcm7038_wdt_set_timeout_reg(struct watchdog_device *wdog)
> +{
> +	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
> +	u32 timeout;
> +
> +	timeout = wdt->rate * wdog->timeout;
> +
> +	writel(timeout, wdt->base + WDT_TIMEOUT_REG);
> +}
> +
> +static int bcm7038_wdt_ping(struct watchdog_device *wdog)
> +{
> +	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
> +
> +	writel(WDT_START_1, wdt->base + WDT_CMD_REG);
> +	writel(WDT_START_2, wdt->base + WDT_CMD_REG);
> +
> +	return 0;
> +}
> +
> +static int bcm7038_wdt_start(struct watchdog_device *wdog)
> +{
> +	bcm7038_wdt_set_timeout_reg(wdog);
> +	bcm7038_wdt_ping(wdog);
> +
> +	return 0;
> +}
> +
> +static int bcm7038_wdt_stop(struct watchdog_device *wdog)
> +{
> +	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
> +
> +	writel(WDT_STOP_1, wdt->base + WDT_CMD_REG);
> +	writel(WDT_STOP_2, wdt->base + WDT_CMD_REG);
> +
> +	return 0;
> +}
> +
> +static int bcm7038_wdt_set_timeout(struct watchdog_device *wdog,
> +				   unsigned int t)
> +{
> +	/* Can't modify timeout value if watchdog timer is running */
> +	bcm7038_wdt_stop(wdog);
> +	wdog->timeout = t;
> +	bcm7038_wdt_start(wdog);
> +
> +	return 0;
> +}
> +
> +static unsigned int bcm7038_wdt_get_timeleft(struct watchdog_device *wdog)
> +{
> +	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
> +	u32 time_left;
> +
> +	time_left = readl(wdt->base + WDT_CMD_REG);
> +
> +	return time_left / wdt->rate;
> +}
> +
> +static struct watchdog_info bcm7038_wdt_info = {
> +	.identity	= "Broadcom BCM7038 Watchdog Timer",
> +	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> +				WDIOF_MAGICCLOSE
> +};
> +
> +static struct watchdog_ops bcm7038_wdt_ops = {
> +	.owner		= THIS_MODULE,
> +	.start		= bcm7038_wdt_start,
> +	.stop		= bcm7038_wdt_stop,
> +	.set_timeout	= bcm7038_wdt_set_timeout,
> +	.get_timeleft	= bcm7038_wdt_get_timeleft,
> +};
> +
> +static int bcm7038_wdt_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct bcm7038_watchdog *wdt;
> +	struct resource *res;
> +	int err;
> +
> +	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
> +	if (!wdt)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, wdt);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	wdt->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(wdt->base))
> +		return PTR_ERR(wdt->base);
> +
> +	wdt->clk = devm_clk_get(dev, NULL);
> +	/* If unable to get clock, use default frequency */
> +	if (!IS_ERR(wdt->clk)) {
> +		clk_prepare_enable(wdt->clk);
> +		wdt->rate = clk_get_rate(wdt->clk);
> +		/* Prevent divide-by-zero exception */
> +		if (!wdt->rate)
> +			wdt->rate = WDT_DEFAULT_RATE;
> +	} else {
> +		wdt->rate = WDT_DEFAULT_RATE;

		wdt->clk = NULL;

is needed here. Not all implementations of clk_disable_unprepare()
can handle the IS_ERR() case.

> +	}
> +
> +	wdt->wdd.info		= &bcm7038_wdt_info;
> +	wdt->wdd.ops		= &bcm7038_wdt_ops;
> +	wdt->wdd.min_timeout	= WDT_MIN_TIMEOUT;
> +	wdt->wdd.timeout	= WDT_DEFAULT_TIMEOUT;
> +	wdt->wdd.max_timeout	= 0xffffffff / wdt->rate;
> +	wdt->wdd.parent		= dev;
> +	watchdog_set_drvdata(&wdt->wdd, wdt);
> +
> +	err = watchdog_register_device(&wdt->wdd);
> +	if (err) {
> +		dev_err(dev, "Failed to register watchdog device\n");

		clk_disable_unprepare(wdt->clk);

> +		return err;
> +	}
> +
> +	dev_info(dev, "Registered BCM7038 Watchdog\n");
> +
> +	return 0;
> +}
> +
> +static int bcm7038_wdt_remove(struct platform_device *pdev)
> +{
> +	struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
> +
> +	if (!nowayout)
> +		bcm7038_wdt_stop(&wdt->wdd);
> +
> +	watchdog_unregister_device(&wdt->wdd);
> +	clk_disable_unprepare(wdt->clk);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int bcm7038_wdt_suspend(struct device *dev)
> +{
> +	struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
> +
> +	if (watchdog_active(&wdt->wdd))
> +		return bcm7038_wdt_stop(&wdt->wdd);
> +
> +	return 0;
> +}
> +
> +static int bcm7038_wdt_resume(struct device *dev)
> +{
> +	struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
> +
> +	if (watchdog_active(&wdt->wdd))
> +		return bcm7038_wdt_start(&wdt->wdd);
> +
> +	return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_ops, bcm7038_wdt_suspend,
> +			 bcm7038_wdt_resume);
> +
> +static void bcm7038_wdt_shutdown(struct platform_device *pdev)
> +{
> +	struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
> +
> +	if (watchdog_active(&wdt->wdd))
> +		bcm7038_wdt_stop(&wdt->wdd);
> +}
> +
> +static const struct of_device_id bcm7038_wdt_match[] = {
> +	{ .compatible = "brcm,bcm7038-wdt" },
> +	{},
> +};
> +
> +static struct platform_driver bcm7038_wdt_driver = {
> +	.probe		= bcm7038_wdt_probe,
> +	.remove		= bcm7038_wdt_remove,
> +	.shutdown	= bcm7038_wdt_shutdown,
> +	.driver		= {
> +		.name		= "bcm7038-wdt",
> +		.of_match_table	= bcm7038_wdt_match,
> +		.pm		= &bcm7038_wdt_pm_ops,
> +	}
> +};
> +module_platform_driver(bcm7038_wdt_driver);
> +
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> +	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Driver for Broadcom 7038 SoCs Watchdog");
> +MODULE_AUTHOR("Justin Chen");
> -- 
> 2.1.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/2] watchdog: bcm7038: add device tree binding documentation

[Guenter Roeck]

On Thu, Aug 27, 2015 at 03:53:23PM -0700, Justin Chen wrote:
> Add device tree binding documentation for the watchdog hardware block
> on bcm7038 and newer SoCs.
> 
> Signed-off-by: Justin Chen <justinpopo6-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Acked-by: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>

> ---
>  .../devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
> new file mode 100644
> index 0000000..39e5cf5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
> @@ -0,0 +1,19 @@
> +BCM7038 Watchdog timer
> +
> +Required properties:
> +
> +- compatible : should be "brcm,bcm7038-wdt"
> +- reg : Specifies base physical address and size of the registers.
> +
> +Optional properties:
> +
> +- clocks: The clock running the watchdog. If no clock is found the
> +	  driver will default to 27000000 HZ.
> +
> +Example:
> +
> +watchdog {
> +	compatible = "brcm,bcm7038-wdt";
> +	clocks = <&upg_fixed>;
> +	reg = <0xf040a7e8 0x16>;
> +};
> -- 
> 2.1.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html