Re: [PATCHv2 2/3] devicetree: Add new ANX7814 SlimPort transmitter binding.

[Rob Herring <robh@kernel.org>]

On 09/08/2015 02:25 AM, Enric Balletbo i Serra wrote:
> The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
> designed for portable devices.
> 
> You can add support to your board with current binding.
> 
> Example:
> 
> 	anx7814: anx7814@38 {
> 		compatible = "analogix,anx7814";
> 		reg = <0x38>;
> 		pd-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
> 		reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
> 	};
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>  .../devicetree/bindings/video/anx7814.txt          | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/anx7814.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/anx7814.txt b/Documentation/devicetree/bindings/video/anx7814.txt
> new file mode 100644
> index 0000000..a8cc746
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/anx7814.txt
> @@ -0,0 +1,22 @@
> +Analogix ANX7814 SlimPort (Full-HD Transmitter)
> +-----------------------------------------------
> +
> +The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
> +designed for portable devices.
> +
> +Required properties:
> +
> + - compatible	: "analogix,anx7814"
> + - reg		: I2C address of the device
> + - pd-gpios	: Which GPIO to use for power down
> + - reset-gpios	: Which GPIO to use for reset
> +
> +Example:
> +
> +	anx7814: anx7814@38 {
> +		compatible = "analogix,anx7814";
> +		reg = <0x38>;
> +		pd-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
> +		reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;

No ports needed for describing data connections?

Rob

> +	};
> +
>