devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chanwoo Choi <cw00.choi@samsung.com>
To: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>,
	lee.jones@linaro.org
Cc: myungjoo.ham@samsung.com, sameo@linux.intel.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	patches@opensource.wolfsonmicro.com
Subject: Re: [PATCH 1/6] mfd: arizona: Add TST_CAP bits for headphone detection
Date: Fri, 11 Sep 2015 17:12:32 +0900	[thread overview]
Message-ID: <55F28CF0.8020006@samsung.com> (raw)
In-Reply-To: <1441885307-24499-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>

Hi Charles,

I recommend that you make the cover-letter patches on later.
If you better to explain the patch description on cover-letter patch,
we will understand what is this patch-set more easily.

Thanks,
Chanwoo Choi

On 2015년 09월 10일 20:41, Charles Keepax wrote:
> On Florida some additional settings are required to get accurate
> measurements at the top end of the headphone detection range. This patch
> adds the bits required for this.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  drivers/mfd/wm5110-tables.c           |    2 ++
>  include/linux/mfd/arizona/registers.h |    8 ++++++++
>  2 files changed, 10 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
> index acb3bb2..78032e8 100644
> --- a/drivers/mfd/wm5110-tables.c
> +++ b/drivers/mfd/wm5110-tables.c
> @@ -1908,6 +1908,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
>  	case ARIZONA_HP1_SHORT_CIRCUIT_CTRL:
>  	case ARIZONA_HP2_SHORT_CIRCUIT_CTRL:
>  	case ARIZONA_HP3_SHORT_CIRCUIT_CTRL:
> +	case ARIZONA_HP_TEST_CTRL_1:
>  	case ARIZONA_AIF1_BCLK_CTRL:
>  	case ARIZONA_AIF1_TX_PIN_CTRL:
>  	case ARIZONA_AIF1_RX_PIN_CTRL:
> @@ -2853,6 +2854,7 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
>  	case ARIZONA_INPUT_ENABLES_STATUS:
>  	case ARIZONA_OUTPUT_STATUS_1:
>  	case ARIZONA_RAW_OUTPUT_STATUS_1:
> +	case ARIZONA_HP_TEST_CTRL_1:
>  	case ARIZONA_SLIMBUS_RX_PORT_STATUS:
>  	case ARIZONA_SLIMBUS_TX_PORT_STATUS:
>  	case ARIZONA_INTERRUPT_STATUS_1:
> diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
> index e96644c..fe1b5d0 100644
> --- a/include/linux/mfd/arizona/registers.h
> +++ b/include/linux/mfd/arizona/registers.h
> @@ -237,6 +237,7 @@
>  #define ARIZONA_HP1_SHORT_CIRCUIT_CTRL           0x4A0
>  #define ARIZONA_HP2_SHORT_CIRCUIT_CTRL           0x4A1
>  #define ARIZONA_HP3_SHORT_CIRCUIT_CTRL           0x4A2
> +#define ARIZONA_HP_TEST_CTRL_1                   0x4A4
>  #define ARIZONA_SPK_CTRL_2                       0x4B5
>  #define ARIZONA_SPK_CTRL_3                       0x4B6
>  #define ARIZONA_DAC_COMP_1                       0x4DC
> @@ -3548,6 +3549,13 @@
>  #define ARIZONA_HP3_SC_ENA_WIDTH                      1  /* HP3_SC_ENA */
>  
>  /*
> + * R1188 (0x4A4) HP Test Ctrl 1
> + */
> +#define ARIZONA_HP1_TST_CAP_SEL_MASK             0x0003  /* HP1_TST_CAP_SEL - [1:0] */
> +#define ARIZONA_HP1_TST_CAP_SEL_SHIFT                 0  /* HP1_TST_CAP_SEL - [1:0] */
> +#define ARIZONA_HP1_TST_CAP_SEL_WIDTH                 2  /* HP1_TST_CAP_SEL - [1:0] */
> +
> +/*
>   * R1244 (0x4DC) - DAC comp 1
>   */
>  #define ARIZONA_OUT_COMP_COEFF_MASK              0xFFFF  /* OUT_COMP_COEFF - [15:0] */
> 

      parent reply	other threads:[~2015-09-11  8:12 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-10 11:41 [PATCH 1/6] mfd: arizona: Add TST_CAP bits for headphone detection Charles Keepax
     [not found] ` <1441885307-24499-1-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-09-10 11:41   ` [PATCH 2/6] extcon: arizona: Additional settings to improve accuracy of HP detect Charles Keepax
2015-09-11  8:16     ` Chanwoo Choi
2015-09-10 11:41   ` [PATCH 3/6] extcon: arizona: Ignore jd_invert for MICD_CLAMP_STS Charles Keepax
     [not found]     ` <1441885307-24499-3-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-09-11  8:05       ` Chanwoo Choi
2015-09-10 11:41 ` [PATCH 4/6] extcon: arizona: Add device binding for jack detect polarity inversion Charles Keepax
     [not found]   ` <1441885307-24499-4-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-09-11  8:07     ` Chanwoo Choi
2015-09-10 11:41 ` [PATCH 5/6] extcon: arizona: Add device binding for second jack detect pin on GPIO5 Charles Keepax
2015-09-11  8:07   ` Chanwoo Choi
2015-09-10 11:41 ` [PATCH 6/6] mfd: arizona: Update DT binding documentation for jack detection Charles Keepax
2015-09-11  8:09   ` Chanwoo Choi
2015-09-11  8:12 ` Chanwoo Choi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55F28CF0.8020006@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).