[PATCH 0/7] soc: brcmstb: add system suspend support for STB SoCs

[PATCH 0/7] soc: brcmstb: add system suspend support for STB SoCs

[Brian Norris]

Hi,

This patch set introduces system suspend/resume support for Broadcom STB SoCs.
There are two suspend modes (S2 and S3) as well as a related low-power shutdown
mode (S5).

Along with the core PM support, include a driver for the wakeup-timer, which
allows for simple testing of suspend/resume wakeup cycles.

Brian

Brian Norris (7):
  Documentation: dt: brcmstb: add system PM bindings
  Documentation: dt: brcmstb: add waketimer documentation
  soc: add stubs for brcmstb SoC's
  soc: brcmstb: add PM suspend/resume support (S2/S3/S5)
  soc: brcmstb: add wake-timer driver
  ARM: brcmstb: mask GIC IRQs on suspend
  ARM: dts: brcmstb: add BCM7445 system PM DT nodes

 .../ABI/testing/sysfs-driver-wktmr-brcmstb         |  12 +
 .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt   | 142 +++++-
 .../soc/brcmstb/brcm,brcmstb-waketimer.txt         |  20 +
 arch/arm/boot/dts/bcm7445.dtsi                     | 102 ++++
 arch/arm/mach-bcm/Kconfig                          |   1 +
 arch/arm/mach-bcm/brcmstb.c                        |  10 +
 drivers/soc/Kconfig                                |   1 +
 drivers/soc/Makefile                               |   1 +
 drivers/soc/brcmstb/Kconfig                        |  22 +
 drivers/soc/brcmstb/Makefile                       |   4 +
 drivers/soc/brcmstb/common.c                       |  33 ++
 drivers/soc/brcmstb/pm/Makefile                    |   1 +
 drivers/soc/brcmstb/pm/aon_defs.h                  |  85 ++++
 drivers/soc/brcmstb/pm/pm.c                        | 512 +++++++++++++++++++++
 drivers/soc/brcmstb/pm/pm.h                        |  40 ++
 drivers/soc/brcmstb/pm/s2.S                        |  73 +++
 drivers/soc/brcmstb/wktmr.c                        | 242 ++++++++++
 include/soc/brcmstb/common.h                       |  15 +
 18 files changed, 1314 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
 create mode 100644 Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt
 create mode 100644 drivers/soc/brcmstb/Kconfig
 create mode 100644 drivers/soc/brcmstb/Makefile
 create mode 100644 drivers/soc/brcmstb/common.c
 create mode 100644 drivers/soc/brcmstb/pm/Makefile
 create mode 100644 drivers/soc/brcmstb/pm/aon_defs.h
 create mode 100644 drivers/soc/brcmstb/pm/pm.c
 create mode 100644 drivers/soc/brcmstb/pm/pm.h
 create mode 100644 drivers/soc/brcmstb/pm/s2.S
 create mode 100644 drivers/soc/brcmstb/wktmr.c
 create mode 100644 include/soc/brcmstb/common.h

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/7] Documentation: dt: brcmstb: add system PM bindings

[Brian Norris]

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt   | 142 ++++++++++++++++++++-
 1 file changed, 140 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index 430608ec09f0..94429649687e 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -43,8 +43,7 @@ example:
         };
     };
 
-Lastly, nodes that allow for support of SMP initialization and reboot are
-required:
+Nodes that allow for support of SMP initialization and reboot are required:
 
 smpboot
 -------
@@ -95,3 +94,142 @@ example:
         compatible = "brcm,brcmstb-reboot";
         syscon = <&sun_top_ctrl 0x304 0x308>;
     };
+
+
+
+Power management
+----------------
+
+For power management (particularly, S2/S3/S5 system suspend), the following SoC
+components are needed:
+
+= Always-On control block (AON CTRL)
+
+This hardware provides control registers for the "always-on" (even in low-power
+modes) hardware, such as the Power Management State Machine (PMSM).
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-aon-ctrl"
+- reg            : the register start and length for the AON CTRL block
+
+Example:
+
+aon-ctrl@410000 {
+	compatible = "brcm,brcmstb-aon-ctrl";
+	reg = <0x410000 0x400>;
+};
+
+= Memory controllers
+
+A Broadcom STB SoC typically has a number of independent memory controllers,
+each of which may have several associated hardware blocks, which are versioned
+independently (control registers, DDR PHYs, etc.). One might consider
+describing these controllers as a parent "memory controllers" block, which
+contains N sub-nodes (one for each controller in the system), each of which is
+associated with a number of hardware register resources (e.g., its PHY). See
+the example device tree snippet below.
+
+== MEMC (MEMory Controller)
+
+Represents a single memory controller instance.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-memc" and "simple-bus"
+
+Should contain subnodes for any of the following relevant hardware resources:
+
+== DDR PHY control
+
+Control registers for this memory controller's DDR PHY.
+
+Required properties:
+- compatible     : should contain one of these
+	"brcm,brcmstb-ddr-phy-v225.1"
+	"brcm,brcmstb-ddr-phy-v240.1"
+	"brcm,brcmstb-ddr-phy-v240.2"
+
+- reg            : the DDR PHY register range
+
+== DDR SHIMPHY
+
+Control registers for this memory controller's DDR SHIMPHY.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-ddr-shimphy-v1.0"
+- reg            : the DDR SHIMPHY register range
+
+== MEMC DDR control
+
+Sequencer DRAM parameters and control registers. Used for Self-Refresh
+Power-Down (SRPD), among other things.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-memc-ddr"
+- reg            : the MEMC DDR register range
+
+Example:
+
+memory_controllers {
+	ranges;
+	compatible = "simple-bus";
+
+	memc@0 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges;
+
+		ddr-phy@f1106000 {
+			compatible = "brcm,brcmstb-ddr-phy-v240.1";
+			reg = <0xf1106000 0x21c>;
+		};
+
+		shimphy@f1108000 {
+			compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+			reg = <0xf1108000 0xe4>;
+		};
+
+		memc-ddr@f1102000 {
+			reg = <0xf1102000 0x800>;
+			compatible = "brcm,brcmstb-memc-ddr";
+		};
+	};
+
+	memc@1 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges;
+
+		ddr-phy@f1186000 {
+			compatible = "brcm,brcmstb-ddr-phy-v240.1";
+			reg = <0xf1186000 0x21c>;
+		};
+
+		shimphy@f1188000 {
+			compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+			reg = <0xf1188000 0xe4>;
+		};
+
+		memc-ddr@f1182000 {
+			reg = <0xf1182000 0x800>;
+			compatible = "brcm,brcmstb-memc-ddr";
+		};
+	};
+
+	memc@2 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges;
+
+		ddr-phy@f1206000 {
+			compatible = "brcm,brcmstb-ddr-phy-v240.1";
+			reg = <0xf1206000 0x21c>;
+		};
+
+		shimphy@f1208000 {
+			compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+			reg = <0xf1208000 0xe4>;
+		};
+
+		memc-ddr@f1202000 {
+			reg = <0xf1202000 0x800>;
+			compatible = "brcm,brcmstb-memc-ddr";
+		};
+	};
+};
-- 
1.9.1

Re: [PATCH 1/7] Documentation: dt: brcmstb: add system PM bindings

[Florian Fainelli]

Le 06/18/15 17:11, Brian Norris a écrit :
> Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Applied to devicetree/next, thanks!
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/7] Documentation: dt: brcmstb: add waketimer documentation

[Brian Norris]

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 .../bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt  | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt

diff --git a/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt
new file mode 100644
index 000000000000..68c4329b6af0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt
@@ -0,0 +1,20 @@
+* Broadcom STB Wake-up Timer
+
+The Broadcom STB wake-up timer provides a high-resolution timer, with the
+ability to wake up the system from low-power suspend/standby modes.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-waketimer"
+- reg            : the register start and length for the WKTMR block
+- interrupts     : The TIMER interrupt
+- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2
+                    interrupt controller node
+
+Example:
+
+waketimer@f0411580 {
+	compatible = "brcm,brcmstb-waketimer";
+	reg = <0xf0411580 0x14>;
+	interrupts = <0x3>;
+	interrupt-parent = <&aon_pm_l2_intc>;
+};
-- 
1.9.1

Re: [PATCH 2/7] Documentation: dt: brcmstb: add waketimer documentation

[Gregory Fong]

On Thu, Jun 18, 2015 at 5:11 PM, Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Acked-by: Gregory Fong <gregory.0xf0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/7] Documentation: dt: brcmstb: add waketimer documentation

[Florian Fainelli]

Le 06/18/15 17:11, Brian Norris a écrit :
> Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Although the binding looks good to me, I am not applying this one just
yet since we would want to merge the wake-timer driver and its binding
at the same time, thanks!

> ---
>  .../bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt  | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt
> 
> diff --git a/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt
> new file mode 100644
> index 000000000000..68c4329b6af0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt
> @@ -0,0 +1,20 @@
> +* Broadcom STB Wake-up Timer
> +
> +The Broadcom STB wake-up timer provides a high-resolution timer, with the
> +ability to wake up the system from low-power suspend/standby modes.
> +
> +Required properties:
> +- compatible     : should contain "brcm,brcmstb-waketimer"
> +- reg            : the register start and length for the WKTMR block
> +- interrupts     : The TIMER interrupt
> +- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2
> +                    interrupt controller node
> +
> +Example:
> +
> +waketimer@f0411580 {
> +	compatible = "brcm,brcmstb-waketimer";
> +	reg = <0xf0411580 0x14>;
> +	interrupts = <0x3>;
> +	interrupt-parent = <&aon_pm_l2_intc>;
> +};
> 


-- 
Florian

[PATCH 3/7] soc: add stubs for brcmstb SoC's

[Brian Norris]

Used on BCM7xxx Set-Top Box chips (e.g., BCM7445).

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 arch/arm/mach-bcm/Kconfig    |  1 +
 drivers/soc/Kconfig          |  1 +
 drivers/soc/Makefile         |  1 +
 drivers/soc/brcmstb/Kconfig  |  9 +++++++++
 drivers/soc/brcmstb/Makefile |  1 +
 drivers/soc/brcmstb/common.c | 33 +++++++++++++++++++++++++++++++++
 include/soc/brcmstb/common.h | 15 +++++++++++++++
 7 files changed, 61 insertions(+)
 create mode 100644 drivers/soc/brcmstb/Kconfig
 create mode 100644 drivers/soc/brcmstb/Makefile
 create mode 100644 drivers/soc/brcmstb/common.c
 create mode 100644 include/soc/brcmstb/common.h

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index e9184feffc4e..11cf1c97093f 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -146,6 +146,7 @@ config ARCH_BRCMSTB
 	select BRCMSTB_L2_IRQ
 	select BCM7120_L2_IRQ
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select SOC_BRCMSTB
 	help
 	  Say Y if you intend to run the kernel on a Broadcom ARM-based STB
 	  chipset.
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 96ddecb92254..c9c0fcce98a7 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,5 +1,6 @@
 menu "SOC (System On Chip) specific Drivers"
 
+source "drivers/soc/brcmstb/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/sunxi/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 7dc7c0d8a2c1..2706b1159e32 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -2,6 +2,7 @@
 # Makefile for the Linux Kernel SOC specific device drivers.
 #
 
+obj-$(CONFIG_SOC_BRCMSTB)	+= brcmstb/
 obj-$(CONFIG_ARCH_MEDIATEK)	+= mediatek/
 obj-$(CONFIG_ARCH_QCOM)		+= qcom/
 obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/
diff --git a/drivers/soc/brcmstb/Kconfig b/drivers/soc/brcmstb/Kconfig
new file mode 100644
index 000000000000..39cab3bd544d
--- /dev/null
+++ b/drivers/soc/brcmstb/Kconfig
@@ -0,0 +1,9 @@
+menuconfig SOC_BRCMSTB
+	bool "Broadcom STB SoC drivers"
+	depends on ARM
+	help
+	  Enables drivers for the Broadcom Set-Top Box (STB) series of chips.
+	  This option alone enables only some support code, while the drivers
+	  can be enabled individually within this menu.
+
+	  If unsure, say N.
diff --git a/drivers/soc/brcmstb/Makefile b/drivers/soc/brcmstb/Makefile
new file mode 100644
index 000000000000..183280e39f80
--- /dev/null
+++ b/drivers/soc/brcmstb/Makefile
@@ -0,0 +1 @@
+obj-y				+= common.o
diff --git a/drivers/soc/brcmstb/common.c b/drivers/soc/brcmstb/common.c
new file mode 100644
index 000000000000..c262c029b1b8
--- /dev/null
+++ b/drivers/soc/brcmstb/common.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright © 2014 NVIDIA Corporation
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+
+#include <soc/brcmstb/common.h>
+
+static const struct of_device_id brcmstb_machine_match[] = {
+	{ .compatible = "brcm,brcmstb", },
+	{ }
+};
+
+bool soc_is_brcmstb(void)
+{
+	struct device_node *root;
+
+	root = of_find_node_by_path("/");
+	if (!root)
+		return false;
+
+	return of_match_node(brcmstb_machine_match, root) != NULL;
+}
diff --git a/include/soc/brcmstb/common.h b/include/soc/brcmstb/common.h
new file mode 100644
index 000000000000..cfb5335f2a15
--- /dev/null
+++ b/include/soc/brcmstb/common.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright © 2014 NVIDIA Corporation
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_BRCMSTB_COMMON_H__
+#define __SOC_BRCMSTB_COMMON_H__
+
+bool soc_is_brcmstb(void);
+
+#endif /* __SOC_BRCMSTB_COMMON_H__ */
-- 
1.9.1

Re: [PATCH 3/7] soc: add stubs for brcmstb SoC's

[Florian Fainelli]

Le 06/18/15 17:11, Brian Norris a écrit :
> Used on BCM7xxx Set-Top Box chips (e.g., BCM7445).
> 
> Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Applied to soc/next, thanks!
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 4/7] soc: brcmstb: add PM suspend/resume support (S2/S3/S5)

[Brian Norris]

Support S2, S3, and S5 through /sys/power/state ("standby" and "mem")
and the poweroff code paths. See comments in pm.c for a few more details
about these system suspend modes.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/soc/brcmstb/Kconfig       |  10 +
 drivers/soc/brcmstb/Makefile      |   2 +
 drivers/soc/brcmstb/pm/Makefile   |   1 +
 drivers/soc/brcmstb/pm/aon_defs.h |  85 +++++++
 drivers/soc/brcmstb/pm/pm.c       | 512 ++++++++++++++++++++++++++++++++++++++
 drivers/soc/brcmstb/pm/pm.h       |  40 +++
 drivers/soc/brcmstb/pm/s2.S       |  73 ++++++
 7 files changed, 723 insertions(+)
 create mode 100644 drivers/soc/brcmstb/pm/Makefile
 create mode 100644 drivers/soc/brcmstb/pm/aon_defs.h
 create mode 100644 drivers/soc/brcmstb/pm/pm.c
 create mode 100644 drivers/soc/brcmstb/pm/pm.h
 create mode 100644 drivers/soc/brcmstb/pm/s2.S

diff --git a/drivers/soc/brcmstb/Kconfig b/drivers/soc/brcmstb/Kconfig
index 39cab3bd544d..5025dacce6f0 100644
--- a/drivers/soc/brcmstb/Kconfig
+++ b/drivers/soc/brcmstb/Kconfig
@@ -7,3 +7,13 @@ menuconfig SOC_BRCMSTB
 	  can be enabled individually within this menu.
 
 	  If unsure, say N.
+
+if SOC_BRCMSTB
+
+config BRCMSTB_PM
+	bool "Support suspend/resume for STB platforms"
+	default y
+	depends on PM
+	depends on ARM && ARCH_BRCMSTB
+
+endif # SOC_BRCMSTB
diff --git a/drivers/soc/brcmstb/Makefile b/drivers/soc/brcmstb/Makefile
index 183280e39f80..677e3fa0d042 100644
--- a/drivers/soc/brcmstb/Makefile
+++ b/drivers/soc/brcmstb/Makefile
@@ -1 +1,3 @@
+obj-$(CONFIG_BRCMSTB_PM)	+= pm/
+
 obj-y				+= common.o
diff --git a/drivers/soc/brcmstb/pm/Makefile b/drivers/soc/brcmstb/pm/Makefile
new file mode 100644
index 000000000000..71a1ff4c368b
--- /dev/null
+++ b/drivers/soc/brcmstb/pm/Makefile
@@ -0,0 +1 @@
+obj-y				+= pm.o s2.o
diff --git a/drivers/soc/brcmstb/pm/aon_defs.h b/drivers/soc/brcmstb/pm/aon_defs.h
new file mode 100644
index 000000000000..2b660fa788e4
--- /dev/null
+++ b/drivers/soc/brcmstb/pm/aon_defs.h
@@ -0,0 +1,85 @@
+/*
+ * Always ON (AON) register interface between bootloader and Linux
+ *
+ * Copyright © 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BRCMSTB_AON_DEFS_H__
+#define __BRCMSTB_AON_DEFS_H__
+
+#include <linux/compiler.h>
+
+/* Magic number in upper 16-bits */
+#define BRCMSTB_S3_MAGIC_MASK                   0xffff0000
+#define BRCMSTB_S3_MAGIC_SHORT                  0x5AFE0000
+
+enum {
+	/* Restore random key for AES memory verification (off = fixed key) */
+	S3_FLAG_LOAD_RANDKEY		= (1 << 0),
+
+	/* Scratch buffer page table is present */
+	S3_FLAG_SCRATCH_BUFFER_TABLE	= (1 << 1),
+
+	/* Skip all memory verification */
+	S3_FLAG_NO_MEM_VERIFY		= (1 << 2),
+};
+
+#define BRCMSTB_HASH_LEN			(128 / 8) /* 128-bit hash */
+
+#define AON_REG_MAGIC_FLAGS			0x00
+#define AON_REG_CONTROL_LOW			0x04
+#define AON_REG_CONTROL_HIGH			0x08
+#define AON_REG_S3_HASH				0x0c /* hash of S3 params */
+#define AON_REG_CONTROL_HASH_LEN		0x1c
+
+#define BRCMSTB_S3_MAGIC		0x5AFEB007
+#define BOOTLOADER_SCRATCH_SIZE		64
+#define IMAGE_DESCRIPTORS_BUFSIZE	(2 * 1024)
+
+/*
+ * Bootloader utilizes a custom parameter block left in DRAM for handling S3
+ * warm resume
+ */
+struct brcmstb_s3_params {
+	/* scratch memory for bootloader */
+	uint8_t scratch[BOOTLOADER_SCRATCH_SIZE];
+
+	uint32_t magic; /* BRCMSTB_S3_MAGIC */
+	uint64_t reentry; /* PA */
+
+	/* descriptors */
+	uint32_t hash[BRCMSTB_HASH_LEN / 4];
+
+	/*
+	 * If 0, then ignore this parameter (there is only one set of
+	 *   descriptors)
+	 *
+	 * If non-0, then a second set of descriptors is stored at:
+	 *
+	 *   descriptors + desc_offset_2
+	 *
+	 * The MAC result of both descriptors is XOR'd and stored in @hash
+	 */
+	uint32_t desc_offset_2;
+
+	/*
+	 * (Physical) address of a brcmstb_bootloader_scratch_table, for
+	 * providing a large DRAM buffer to the bootloader
+	 */
+	uint64_t buffer_table;
+
+	uint32_t spare[70];
+
+	uint8_t descriptors[IMAGE_DESCRIPTORS_BUFSIZE];
+} __packed;
+
+#endif /* __BRCMSTB_AON_DEFS_H__ */
diff --git a/drivers/soc/brcmstb/pm/pm.c b/drivers/soc/brcmstb/pm/pm.c
new file mode 100644
index 000000000000..04f0528d5322
--- /dev/null
+++ b/drivers/soc/brcmstb/pm/pm.c
@@ -0,0 +1,512 @@
+/*
+ * ARM-specific support for Broadcom STB S2/S3/S5 power management
+ *
+ * S2: clock gate CPUs and as many peripherals as possible
+ * S3: power off all of the chip except the Always ON (AON) island; keep DDR is
+ *     self-refresh
+ * S5: (a.k.a. S3 cold boot) much like S3, except DDR is powered down, so we
+ *     treat this mode like a soft power-off, with wakeup allowed from AON
+ *
+ * Copyright © 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "brcmstb-pm: " fmt
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/suspend.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/compiler.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/kconfig.h>
+#include <asm/fncpy.h>
+#include <asm/suspend.h>
+#include <asm/setup.h>
+
+#include <soc/brcmstb/common.h>
+
+#include "pm.h"
+#include "aon_defs.h"
+
+#define BRCMSTB_DDR_PHY_PLL_STATUS	0x04
+
+#define SHIMPHY_DDR_PAD_CNTRL		0x8c
+#define SHIMPHY_PAD_PLL_SEQUENCE	BIT(8)
+#define SHIMPHY_PAD_GATE_PLL_S3		BIT(9)
+
+#define MAX_NUM_MEMC			3
+
+/* Capped for performance reasons */
+#define MAX_HASH_SIZE			SZ_256M
+/* Max per bank, to keep some fairness */
+#define MAX_HASH_SIZE_BANK		SZ_64M
+
+struct brcmstb_memc {
+	void __iomem *ddr_phy_base;
+	void __iomem *ddr_shimphy_base;
+};
+
+struct brcmstb_pm_control {
+	void __iomem *aon_ctrl_base;
+	void __iomem *aon_sram;
+	struct brcmstb_memc memcs[MAX_NUM_MEMC];
+
+	void __iomem *boot_sram;
+	size_t boot_sram_len;
+
+	bool support_warm_boot;
+	int num_memc;
+
+	struct brcmstb_s3_params *s3_params;
+	dma_addr_t s3_params_pa;
+};
+
+enum bsp_initiate_command {
+	BSP_CLOCK_STOP		= 0x00,
+	BSP_GEN_RANDOM_KEY	= 0x4A,
+	BSP_RESTORE_RANDOM_KEY	= 0x55,
+	BSP_GEN_FIXED_KEY	= 0x63,
+};
+
+#define PM_INITIATE		0x01
+#define PM_INITIATE_SUCCESS	0x00
+#define PM_INITIATE_FAIL	0xfe
+
+static struct brcmstb_pm_control ctrl;
+
+extern const unsigned long brcmstb_pm_do_s2_sz;
+extern asmlinkage int brcmstb_pm_do_s2(void __iomem *aon_ctrl_base,
+		void __iomem *ddr_phy_pll_status);
+
+static int (*brcmstb_pm_do_s2_sram)(void __iomem *aon_ctrl_base,
+		void __iomem *ddr_phy_pll_status);
+
+static int brcmstb_init_sram(struct device_node *dn)
+{
+	void __iomem *sram;
+	struct resource res;
+	int ret;
+
+	ret = of_address_to_resource(dn, 0, &res);
+	if (ret)
+		return ret;
+
+	/* Cached, executable remapping of SRAM */
+	sram = __arm_ioremap_exec(res.start, resource_size(&res), true);
+	if (!sram)
+		return -ENOMEM;
+
+	ctrl.boot_sram = sram;
+	ctrl.boot_sram_len = resource_size(&res);
+
+	return 0;
+}
+
+/*
+ * Latch into the BRCM SRAM compatible property here to be more specific than
+ * the standard "mmio-sram". Could be supported with genalloc too, but that
+ * would be overkill for its current single use-case.
+ */
+static const struct of_device_id sram_dt_ids[] = {
+	{ .compatible = "brcm,boot-sram" },
+	{}
+};
+
+static int do_bsp_initiate_command(enum bsp_initiate_command cmd)
+{
+	void __iomem *base = ctrl.aon_ctrl_base;
+	int ret;
+	int timeo = 1000 * 1000; /* 1 second */
+
+	__raw_writel(0, base + AON_CTRL_PM_INITIATE);
+	(void)__raw_readl(base + AON_CTRL_PM_INITIATE);
+
+	/* Go! */
+	__raw_writel((cmd << 1) | PM_INITIATE, base + AON_CTRL_PM_INITIATE);
+
+	for (;;) {
+		ret = __raw_readl(base + AON_CTRL_PM_INITIATE);
+		if (!(ret & PM_INITIATE))
+			break;
+		if (timeo <= 0) {
+			pr_err("error: timeout waiting for BSP (%x)\n", ret);
+			break;
+		}
+		timeo -= 50;
+		udelay(50);
+	}
+
+	return (ret & 0xff) != PM_INITIATE_SUCCESS;
+}
+
+static int brcmstb_pm_handshake(void)
+{
+	void __iomem *base = ctrl.aon_ctrl_base;
+	u32 tmp;
+	int ret;
+
+	/* BSP power handshake, v1 */
+	tmp = __raw_readl(base + AON_CTRL_HOST_MISC_CMDS);
+	tmp &= ~1UL;
+	__raw_writel(tmp, base + AON_CTRL_HOST_MISC_CMDS);
+	(void)__raw_readl(base + AON_CTRL_HOST_MISC_CMDS);
+
+	ret = do_bsp_initiate_command(BSP_CLOCK_STOP);
+	if (ret)
+		pr_err("BSP handshake failed\n");
+
+	/*
+	 * HACK: BSP may have internal race on the CLOCK_STOP command.
+	 * Avoid touching the BSP for a few milliseconds.
+	 */
+	mdelay(3);
+
+	return ret;
+}
+
+/*
+ * Run a Power Management State Machine (PMSM) shutdown command and put the CPU
+ * into a low-power mode
+ */
+static void brcmstb_do_pmsm_power_down(unsigned long base_cmd)
+{
+	void __iomem *base = ctrl.aon_ctrl_base;
+
+	/* pm_start_pwrdn transition 0->1 */
+	__raw_writel(base_cmd, base + AON_CTRL_PM_CTRL);
+	(void)__raw_readl(base + AON_CTRL_PM_CTRL);
+
+	__raw_writel(base_cmd | PM_PWR_DOWN, base + AON_CTRL_PM_CTRL);
+	(void)__raw_readl(base + AON_CTRL_PM_CTRL);
+
+	wfi();
+}
+
+/* Support S5 cold boot out of "poweroff" */
+static void brcmstb_pm_poweroff(void)
+{
+	brcmstb_pm_handshake();
+
+	/* Clear magic S3 warm-boot value */
+	__raw_writel(0, ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+	(void)__raw_readl(ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+
+	/* Skip wait-for-interrupt signal; just use a countdown */
+	__raw_writel(0x10, ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT);
+	(void)__raw_readl(ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT);
+
+	brcmstb_do_pmsm_power_down(PM_COLD_CONFIG);
+}
+
+static void *brcmstb_pm_copy_to_sram(void *fn, size_t len)
+{
+	unsigned int size = ALIGN(len, FNCPY_ALIGN);
+
+	if (ctrl.boot_sram_len < size) {
+		pr_err("standby code will not fit in SRAM\n");
+		return NULL;
+	}
+
+	return fncpy(ctrl.boot_sram, fn, size);
+}
+
+/*
+ * S2 suspend/resume picks up where we left off, so we must execute carefully
+ * from SRAM, in order to allow DDR to come back up safely before we continue.
+ */
+static int brcmstb_pm_s2(void)
+{
+	brcmstb_pm_do_s2_sram = brcmstb_pm_copy_to_sram(&brcmstb_pm_do_s2,
+			brcmstb_pm_do_s2_sz);
+	if (!brcmstb_pm_do_s2_sram)
+		return -EINVAL;
+
+	return brcmstb_pm_do_s2_sram(ctrl.aon_ctrl_base,
+			ctrl.memcs[0].ddr_phy_base +
+			BRCMSTB_DDR_PHY_PLL_STATUS);
+}
+
+static int brcmstb_pm_s3_finish(void)
+{
+	struct brcmstb_s3_params *params = ctrl.s3_params;
+	phys_addr_t params_pa = ctrl.s3_params_pa;
+	phys_addr_t reentry = virt_to_phys(&cpu_resume);
+	u32 flags = S3_FLAG_NO_MEM_VERIFY;
+	int i;
+
+	/* Clear parameter structure */
+	memset(params, 0, sizeof(*params));
+
+	params->magic = BRCMSTB_S3_MAGIC;
+	params->reentry = reentry;
+
+	flush_cache_all();
+
+	flags |= BRCMSTB_S3_MAGIC_SHORT;
+
+	__raw_writel(flags, ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+	__raw_writel(lower_32_bits(params_pa),
+		     ctrl.aon_sram + AON_REG_CONTROL_LOW);
+	__raw_writel(upper_32_bits(params_pa),
+		     ctrl.aon_sram + AON_REG_CONTROL_HIGH);
+
+	/* gate PLL | S3 */
+	for (i = 0; i < ctrl.num_memc; i++) {
+		u32 tmp;
+		tmp = __raw_readl(ctrl.memcs[i].ddr_shimphy_base +
+				SHIMPHY_DDR_PAD_CNTRL);
+		tmp |= SHIMPHY_PAD_GATE_PLL_S3 | SHIMPHY_PAD_PLL_SEQUENCE;
+		__raw_writel(tmp, ctrl.memcs[i].ddr_shimphy_base +
+				SHIMPHY_DDR_PAD_CNTRL);
+	}
+
+	brcmstb_do_pmsm_power_down(PM_WARM_CONFIG);
+
+	/* Must have been interrupted from wfi()? */
+	return -EINTR;
+}
+
+/*
+ * S3 mode resume to the bootloader before jumping back to Linux, so we can be
+ * a little less careful about running from DRAM.
+ */
+static int brcmstb_pm_do_s3(unsigned long sp)
+{
+	int ret;
+
+	/* should not return */
+	ret = brcmstb_pm_s3_finish();
+
+	pr_err("Could not enter S3\n");
+
+	return ret;
+}
+
+static int brcmstb_pm_s3(void)
+{
+	void __iomem *sp = ctrl.boot_sram + ctrl.boot_sram_len - 8;
+
+	return cpu_suspend((unsigned long)sp, brcmstb_pm_do_s3);
+}
+
+static int brcmstb_pm_standby(bool deep_standby)
+{
+	int ret;
+
+	if (brcmstb_pm_handshake())
+		return -EIO;
+
+	if (deep_standby)
+		ret = brcmstb_pm_s3();
+	else
+		ret = brcmstb_pm_s2();
+	if (ret)
+		pr_err("%s: standby failed\n", __func__);
+
+	return ret;
+}
+
+static int brcmstb_pm_enter(suspend_state_t state)
+{
+	int ret = -EINVAL;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		ret = brcmstb_pm_standby(false);
+		break;
+	case PM_SUSPEND_MEM:
+		ret = brcmstb_pm_standby(true);
+		break;
+	}
+
+	return ret;
+}
+
+static int brcmstb_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return true;
+	case PM_SUSPEND_MEM:
+		return ctrl.support_warm_boot;
+	default:
+		return false;
+	}
+}
+
+static const struct platform_suspend_ops brcmstb_pm_ops = {
+	.enter		= brcmstb_pm_enter,
+	.valid		= brcmstb_pm_valid,
+};
+
+static const struct of_device_id aon_ctrl_dt_ids[] = {
+	{ .compatible = "brcm,brcmstb-aon-ctrl" },
+	{}
+};
+
+struct ddr_phy_ofdata {
+	bool supports_warm_boot;
+};
+
+static struct ddr_phy_ofdata ddr_phy_225_1 = { .supports_warm_boot = false, };
+static struct ddr_phy_ofdata ddr_phy_240_1 = { .supports_warm_boot = true, };
+
+static const struct of_device_id ddr_phy_dt_ids[] = {
+	{
+		.compatible = "brcm,brcmstb-ddr-phy-v225.1",
+		.data = &ddr_phy_225_1,
+	},
+	{
+		.compatible = "brcm,brcmstb-ddr-phy-v240.1",
+		.data = &ddr_phy_240_1,
+	},
+	{
+		/* Same as v240.1, for the registers we care about */
+		.compatible = "brcm,brcmstb-ddr-phy-v240.2",
+		.data = &ddr_phy_240_1,
+	},
+	{}
+};
+
+static const struct of_device_id ddr_shimphy_dt_ids[] = {
+	{ .compatible = "brcm,brcmstb-ddr-shimphy-v1.0" },
+	{}
+};
+
+static inline void __iomem *brcmstb_ioremap_node(struct device_node *dn,
+						 int index)
+{
+	return of_io_request_and_map(dn, index, dn->full_name);
+}
+
+static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches,
+					   int index, const void **ofdata)
+{
+	struct device_node *dn;
+	const struct of_device_id *match;
+
+	dn = of_find_matching_node_and_match(NULL, matches, &match);
+	if (!dn)
+		return ERR_PTR(-EINVAL);
+
+	if (ofdata)
+		*ofdata = match->data;
+
+	return brcmstb_ioremap_node(dn, index);
+}
+
+static int brcmstb_pm_init(void)
+{
+	struct device_node *dn;
+	void __iomem *base;
+	int ret, i;
+	const struct ddr_phy_ofdata *ddr_phy_data;
+
+	if (!soc_is_brcmstb())
+		return 0;
+
+	/* AON ctrl registers */
+	base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL);
+	if (IS_ERR(base)) {
+		pr_err("error mapping AON_CTRL\n");
+		return PTR_ERR(base);
+	}
+	ctrl.aon_ctrl_base = base;
+
+	/* AON SRAM registers */
+	base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL);
+	if (IS_ERR(base)) {
+		/* Assume standard offset */
+		ctrl.aon_sram = ctrl.aon_ctrl_base +
+				     AON_CTRL_SYSTEM_DATA_RAM_OFS;
+	} else {
+		ctrl.aon_sram = base;
+	}
+
+	/* DDR PHY registers */
+	base = brcmstb_ioremap_match(ddr_phy_dt_ids, 0,
+				     (const void **)&ddr_phy_data);
+	if (IS_ERR(base)) {
+		pr_err("error mapping DDR PHY\n");
+		return PTR_ERR(base);
+	}
+	ctrl.support_warm_boot = ddr_phy_data->supports_warm_boot;
+	/* Only need DDR PHY 0 for now? */
+	ctrl.memcs[0].ddr_phy_base = base;
+
+	/* DDR SHIM-PHY registers */
+	for_each_matching_node(dn, ddr_shimphy_dt_ids) {
+		i = ctrl.num_memc;
+		if (i >= MAX_NUM_MEMC) {
+			pr_warn("too many MEMCs (max %d)\n", MAX_NUM_MEMC);
+			break;
+		}
+		base = brcmstb_ioremap_node(dn, 0);
+		if (IS_ERR(base)) {
+			if (!ctrl.support_warm_boot)
+				break;
+
+			pr_err("error mapping DDR SHIMPHY %d\n", i);
+			return PTR_ERR(base);
+		}
+		ctrl.memcs[i].ddr_shimphy_base = base;
+		ctrl.num_memc++;
+	}
+
+	dn = of_find_matching_node(NULL, sram_dt_ids);
+	if (!dn) {
+		pr_err("SRAM not found\n");
+		return -EINVAL;
+	}
+
+	ret = brcmstb_init_sram(dn);
+	if (ret) {
+		pr_err("error setting up SRAM for PM\n");
+		return ret;
+	}
+
+	ctrl.s3_params = kmalloc(sizeof(*ctrl.s3_params), GFP_KERNEL);
+	if (!ctrl.s3_params)
+		return -ENOMEM;
+	ctrl.s3_params_pa = dma_map_single(NULL, ctrl.s3_params,
+					   sizeof(*ctrl.s3_params),
+					   DMA_TO_DEVICE);
+	if (dma_mapping_error(NULL, ctrl.s3_params_pa)) {
+		pr_err("error mapping DMA memory\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	pm_power_off = brcmstb_pm_poweroff;
+	suspend_set_ops(&brcmstb_pm_ops);
+	return 0;
+
+out:
+	kfree(ctrl.s3_params);
+
+	pr_warn("PM: initialization failed with code %d\n", ret);
+
+	return ret;
+}
+
+arch_initcall(brcmstb_pm_init);
diff --git a/drivers/soc/brcmstb/pm/pm.h b/drivers/soc/brcmstb/pm/pm.h
new file mode 100644
index 000000000000..fadab6dc424a
--- /dev/null
+++ b/drivers/soc/brcmstb/pm/pm.h
@@ -0,0 +1,40 @@
+/*
+ * Definitions for Broadcom STB power management / Always ON (AON) block
+ *
+ * Copyright © 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BRCMSTB_PM_H__
+#define __BRCMSTB_PM_H__
+
+#define AON_CTRL_RESET_CTRL		0x00
+#define AON_CTRL_PM_CTRL		0x04
+#define AON_CTRL_PM_STATUS		0x08
+#define AON_CTRL_PM_CPU_WAIT_COUNT	0x10
+#define AON_CTRL_PM_INITIATE		0x88
+#define AON_CTRL_HOST_MISC_CMDS		0x8c
+#define AON_CTRL_SYSTEM_DATA_RAM_OFS	0x200
+
+/* PM_CTRL bitfield */
+#define PM_FAST_PWRDOWN			(1 << 6)
+#define PM_WARM_BOOT			(1 << 5)
+#define PM_DEEP_STANDBY			(1 << 4)
+#define PM_CPU_PWR			(1 << 3)
+#define PM_USE_CPU_RDY			(1 << 2)
+#define PM_PLL_PWRDOWN			(1 << 1)
+#define PM_PWR_DOWN			(1 << 0)
+
+#define PM_S2_COMMAND	(PM_PLL_PWRDOWN | PM_USE_CPU_RDY | PM_PWR_DOWN)
+#define PM_COLD_CONFIG	(PM_PLL_PWRDOWN | PM_DEEP_STANDBY)
+#define PM_WARM_CONFIG	(PM_COLD_CONFIG | PM_USE_CPU_RDY | PM_WARM_BOOT)
+
+#endif /* __BRCMSTB_PM_H__ */
diff --git a/drivers/soc/brcmstb/pm/s2.S b/drivers/soc/brcmstb/pm/s2.S
new file mode 100644
index 000000000000..704c4ecb6f6f
--- /dev/null
+++ b/drivers/soc/brcmstb/pm/s2.S
@@ -0,0 +1,73 @@
+/*
+ * Copyright © 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#include "pm.h"
+
+	.text
+	.align	3
+
+#define AON_CTRL_REG		r10
+#define DDR_PHY_STATUS_REG	r11
+
+/*
+ * r0: AON_CTRL base address
+ * r1: DDRY PHY PLL status register address
+ */
+ENTRY(brcmstb_pm_do_s2)
+	stmfd	sp!, {r4-r11, lr}
+	mov	AON_CTRL_REG, r0
+	mov	DDR_PHY_STATUS_REG, r1
+
+	/* Flush memory transactions */
+	dsb
+
+	/* power down request */
+	ldr	r0, =PM_S2_COMMAND
+	ldr	r1, =0
+	str	r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	ldr	r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	str	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	ldr	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+
+	/* Wait for interrupt */
+	wfi
+	nop
+
+	/* Bring MEMC back up */
+1:	ldr	r0, [DDR_PHY_STATUS_REG]
+	ands	r0, #1
+	beq	1b
+
+	/* Power-up handshake */
+	ldr	r0, =1
+	str	r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS]
+	ldr	r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS]
+
+	ldr	r0, =0
+	str	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	ldr	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+
+	/* Return to caller */
+	ldr	r0, =0
+	ldmfd	sp!, {r4-r11, pc}
+
+	ENDPROC(brcmstb_pm_do_s2)
+
+	/* Place literal pool here */
+	.ltorg
+
+ENTRY(brcmstb_pm_do_s2_sz)
+	.word   . - brcmstb_pm_do_s2
-- 
1.9.1

Re: [PATCH 4/7] soc: brcmstb: add PM suspend/resume support (S2/S3/S5)

[Florian Fainelli]

Le 06/18/15 17:11, Brian Norris a écrit :
> Support S2, S3, and S5 through /sys/power/state ("standby" and "mem")
> and the poweroff code paths. See comments in pm.c for a few more details
> about these system suspend modes.
> 
> Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Applied to soc/next with an appropriate AFLAGS to force the assembler in
ARMv7-a mode for s2.S, thanks!
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/7] soc: brcmstb: add wake-timer driver

[Brian Norris]

Useful for waking the system from suspend after a specified period of
time.

This IP could potentially be supported as an RTC driver (for use with
the 'rtcwake' utility), but it is not battery backed, so that's not a
great fit. Implement a custom sysfs interface instead.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 .../ABI/testing/sysfs-driver-wktmr-brcmstb         |  12 +
 drivers/soc/brcmstb/Kconfig                        |   3 +
 drivers/soc/brcmstb/Makefile                       |   1 +
 drivers/soc/brcmstb/wktmr.c                        | 242 +++++++++++++++++++++
 4 files changed, 258 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
 create mode 100644 drivers/soc/brcmstb/wktmr.c

diff --git a/Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb b/Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
new file mode 100644
index 000000000000..e563f8b8d969
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
@@ -0,0 +1,12 @@
+What:		/sys/bus/platform/drivers/brcm-waketimer/<MMIO-address>.waketimer/timeout
+Date:		November 21, 2014
+KernelVersion:	3.14
+Contact:	Brian Norris <norris@broadcom.com>
+Description:	The control file for the wakeup timer. This integer value
+		represents the number of seconds between a suspend operation
+		(e.g., S3 suspend-to-RAM) and the time at which the wakeup
+		timer should fire.
+
+		Values are -1 (default) or any non-negative integer. Units are
+		in seconds. The special value of -1 means the timer should not
+		wake up the system.
diff --git a/drivers/soc/brcmstb/Kconfig b/drivers/soc/brcmstb/Kconfig
index 5025dacce6f0..e818eca7e847 100644
--- a/drivers/soc/brcmstb/Kconfig
+++ b/drivers/soc/brcmstb/Kconfig
@@ -16,4 +16,7 @@ config BRCMSTB_PM
 	depends on PM
 	depends on ARM && ARCH_BRCMSTB
 
+config BRCMSTB_WKTMR
+	tristate "Support wake-up timer"
+
 endif # SOC_BRCMSTB
diff --git a/drivers/soc/brcmstb/Makefile b/drivers/soc/brcmstb/Makefile
index 677e3fa0d042..6ecba0644229 100644
--- a/drivers/soc/brcmstb/Makefile
+++ b/drivers/soc/brcmstb/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_BRCMSTB_PM)	+= pm/
 
 obj-y				+= common.o
+obj-$(CONFIG_BRCMSTB_WKTMR)	+= wktmr.o
diff --git a/drivers/soc/brcmstb/wktmr.c b/drivers/soc/brcmstb/wktmr.c
new file mode 100644
index 000000000000..89f989724d3c
--- /dev/null
+++ b/drivers/soc/brcmstb/wktmr.c
@@ -0,0 +1,242 @@
+/*
+ * Copyright © 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/pm_wakeup.h>
+#include <linux/reboot.h>
+
+#define DRV_NAME	"brcm-waketimer"
+
+struct brcmstb_waketmr {
+	struct device *dev;
+	void __iomem *base;
+	unsigned int irq;
+
+	int wake_timeout;
+	struct notifier_block reboot_notifier;
+};
+
+/* No timeout */
+#define BRCMSTB_WKTMR_DEFAULT_TIMEOUT	(-1)
+
+#define BRCMSTB_WKTMR_EVENT		0x00
+#define BRCMSTB_WKTMR_COUNTER		0x04
+#define BRCMSTB_WKTMR_ALARM		0x08
+#define BRCMSTB_WKTMR_PRESCALER		0x0C
+#define BRCMSTB_WKTMR_PRESACALER_VAL	0x10
+
+static inline void brcmstb_waketmr_clear_alarm(struct brcmstb_waketmr *timer)
+{
+	writel_relaxed(1, timer->base + BRCMSTB_WKTMR_EVENT);
+	(void)readl_relaxed(timer->base + BRCMSTB_WKTMR_EVENT);
+}
+
+static void brcmstb_waketmr_set_alarm(struct brcmstb_waketmr *timer,
+		unsigned int secs)
+{
+	unsigned int t;
+
+	brcmstb_waketmr_clear_alarm(timer);
+
+	t = readl_relaxed(timer->base + BRCMSTB_WKTMR_COUNTER);
+	writel_relaxed(t + secs + 1, timer->base + BRCMSTB_WKTMR_ALARM);
+}
+
+static irqreturn_t brcmstb_waketmr_irq(int irq, void *data)
+{
+	struct brcmstb_waketmr *timer = data;
+	pm_wakeup_event(timer->dev, 0);
+	return IRQ_HANDLED;
+}
+
+static ssize_t brcmstb_waketmr_timeout_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", timer->wake_timeout);
+}
+
+static ssize_t brcmstb_waketmr_timeout_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+	int timeout;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &timeout);
+	if (ret < 0)
+		return ret;
+
+	/* Allow -1 as "no timeout" */
+	if (timeout < -1)
+		return -EINVAL;
+
+	timer->wake_timeout = timeout;
+
+	return count;
+}
+
+static const DEVICE_ATTR(timeout, S_IRUGO | S_IWUSR,
+		brcmstb_waketmr_timeout_show,
+		brcmstb_waketmr_timeout_store);
+
+static int brcmstb_waketmr_prepare_suspend(struct brcmstb_waketmr *timer)
+{
+	struct device *dev = timer->dev;
+	int ret;
+
+	if (device_may_wakeup(dev) && timer->wake_timeout >= 0) {
+		ret = enable_irq_wake(timer->irq);
+		if (ret) {
+			dev_err(dev, "failed to enable wake-up interrupt\n");
+			return ret;
+		}
+
+		brcmstb_waketmr_set_alarm(timer, timer->wake_timeout);
+	}
+	return 0;
+}
+
+/* If enabled as a wakeup-source, arm the timer when powering off */
+static int brcmstb_waketmr_reboot(struct notifier_block *nb,
+		unsigned long action, void *data)
+{
+	struct brcmstb_waketmr *timer;
+	timer = container_of(nb, struct brcmstb_waketmr, reboot_notifier);
+
+	/* Set timer for cold boot */
+	if (action == SYS_POWER_OFF)
+		brcmstb_waketmr_prepare_suspend(timer);
+
+	return NOTIFY_DONE;
+}
+
+static int brcmstb_waketmr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct brcmstb_waketmr *timer;
+	struct resource *res;
+	int ret;
+
+	timer = devm_kzalloc(dev, sizeof(*timer), GFP_KERNEL);
+	if (!timer)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, timer);
+
+	timer->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	timer->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(timer->base))
+		return PTR_ERR(timer->base);
+
+	/*
+	 * Set wakeup capability before requesting wakeup interrupt, so we can
+	 * process boot-time "wakeups" (e.g., from S5 soft-off)
+	 */
+	device_set_wakeup_capable(dev, true);
+	device_wakeup_enable(dev);
+
+	timer->irq = platform_get_irq(pdev, 0);
+	if ((int)timer->irq < 0)
+		return -ENODEV;
+
+	ret = devm_request_irq(dev, timer->irq, brcmstb_waketmr_irq, 0,
+			       DRV_NAME, timer);
+	if (ret < 0)
+		return ret;
+
+	timer->reboot_notifier.notifier_call = brcmstb_waketmr_reboot;
+	register_reboot_notifier(&timer->reboot_notifier);
+
+	timer->wake_timeout = BRCMSTB_WKTMR_DEFAULT_TIMEOUT;
+
+	ret = device_create_file(dev, &dev_attr_timeout);
+	if (ret)
+		unregister_reboot_notifier(&timer->reboot_notifier);
+	else
+		dev_info(dev, "registered, with irq %d\n", timer->irq);
+	return ret;
+}
+
+static int brcmstb_waketmr_remove(struct platform_device *pdev)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(&pdev->dev);
+
+	device_remove_file(&pdev->dev, &dev_attr_timeout);
+	unregister_reboot_notifier(&timer->reboot_notifier);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcmstb_waketmr_suspend(struct device *dev)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+
+	return brcmstb_waketmr_prepare_suspend(timer);
+}
+
+static int brcmstb_waketmr_resume(struct device *dev)
+{
+	struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+	int ret;
+
+	if (!device_may_wakeup(dev) || timer->wake_timeout < 0)
+		return 0;
+
+	ret = disable_irq_wake(timer->irq);
+
+	brcmstb_waketmr_clear_alarm(timer);
+
+	return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(brcmstb_waketmr_pm_ops, brcmstb_waketmr_suspend,
+		brcmstb_waketmr_resume);
+
+static const struct of_device_id brcmstb_waketmr_of_match[] = {
+	{ .compatible = "brcm,brcmstb-waketimer" },
+	{},
+};
+
+static struct platform_driver brcmstb_waketmr_driver = {
+	.probe			= brcmstb_waketmr_probe,
+	.remove			= brcmstb_waketmr_remove,
+	.driver = {
+		.name		= DRV_NAME,
+		.pm		= &brcmstb_waketmr_pm_ops,
+		.of_match_table	= of_match_ptr(brcmstb_waketmr_of_match),
+	}
+};
+module_platform_driver(brcmstb_waketmr_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("Wake-up timer driver for STB chips");
-- 
1.9.1

Re: [PATCH 5/7] soc: brcmstb: add wake-timer driver

[Gregory Fong]

On Thu, Jun 18, 2015 at 5:11 PM, Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Useful for waking the system from suspend after a specified period of
> time.
>
> This IP could potentially be supported as an RTC driver (for use with
> the 'rtcwake' utility), but it is not battery backed, so that's not a
> great fit. Implement a custom sysfs interface instead.
>
> Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  .../ABI/testing/sysfs-driver-wktmr-brcmstb         |  12 +
>  drivers/soc/brcmstb/Kconfig                        |   3 +
>  drivers/soc/brcmstb/Makefile                       |   1 +
>  drivers/soc/brcmstb/wktmr.c                        | 242 +++++++++++++++++++++
>  4 files changed, 258 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
>  create mode 100644 drivers/soc/brcmstb/wktmr.c
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb b/Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
> new file mode 100644
> index 000000000000..e563f8b8d969
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
> @@ -0,0 +1,12 @@
> +What:          /sys/bus/platform/drivers/brcm-waketimer/<MMIO-address>.waketimer/timeout
> +Date:          November 21, 2014
> +KernelVersion: 3.14
> +Contact:       Brian Norris <norris-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>

Shouldn't this be "Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>"?

> +Description:   The control file for the wakeup timer. This integer value
> +               represents the number of seconds between a suspend operation
> +               (e.g., S3 suspend-to-RAM) and the time at which the wakeup
> +               timer should fire.
> [...]
> diff --git a/drivers/soc/brcmstb/wktmr.c b/drivers/soc/brcmstb/wktmr.c
> new file mode 100644
> index 000000000000..89f989724d3c
> --- /dev/null
> +++ b/drivers/soc/brcmstb/wktmr.c
> @@ -0,0 +1,242 @@
> [...]
> +
> +static void brcmstb_waketmr_set_alarm(struct brcmstb_waketmr *timer,
> +               unsigned int secs)
> +{
> +       unsigned int t;

Use u32.

> +
> +       brcmstb_waketmr_clear_alarm(timer);
> +
> +       t = readl_relaxed(timer->base + BRCMSTB_WKTMR_COUNTER);
> +       writel_relaxed(t + secs + 1, timer->base + BRCMSTB_WKTMR_ALARM);
> +}
> +
> [...]
> +static int brcmstb_waketmr_probe(struct platform_device *pdev)
> +{
> [...]
> +       /*
> +        * Set wakeup capability before requesting wakeup interrupt, so we can
> +        * process boot-time "wakeups" (e.g., from S5 soft-off)
> +        */
> +       device_set_wakeup_capable(dev, true);
> +       device_wakeup_enable(dev);
> +
> +       timer->irq = platform_get_irq(pdev, 0);
> +       if ((int)timer->irq < 0)

Probably better to just have timer->irq be a signed int so you don't
need this cast.

> [snip]

Acked-by: Gregory Fong <gregory.0xf0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 5/7] soc: brcmstb: add wake-timer driver

[Brian Norris]

On Thu, Jun 18, 2015 at 07:20:26PM -0700, Gregory Fong wrote:
> On Thu, Jun 18, 2015 at 5:11 PM, Brian Norris
> <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > Useful for waking the system from suspend after a specified period of
> > time.
> >
> > This IP could potentially be supported as an RTC driver (for use with
> > the 'rtcwake' utility), but it is not battery backed, so that's not a
> > great fit. Implement a custom sysfs interface instead.
> >
> > Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > ---
> >  .../ABI/testing/sysfs-driver-wktmr-brcmstb         |  12 +
> >  drivers/soc/brcmstb/Kconfig                        |   3 +
> >  drivers/soc/brcmstb/Makefile                       |   1 +
> >  drivers/soc/brcmstb/wktmr.c                        | 242 +++++++++++++++++++++
> >  4 files changed, 258 insertions(+)
> >  create mode 100644 Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
> >  create mode 100644 drivers/soc/brcmstb/wktmr.c
> >
> > diff --git a/Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb b/Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
> > new file mode 100644
> > index 000000000000..e563f8b8d969
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
> > @@ -0,0 +1,12 @@
> > +What:          /sys/bus/platform/drivers/brcm-waketimer/<MMIO-address>.waketimer/timeout
> > +Date:          November 21, 2014
> > +KernelVersion: 3.14
> > +Contact:       Brian Norris <norris-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> 
> Shouldn't this be "Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>"?

Indeed, thanks. Wouldn't want things bouncing...

> > +Description:   The control file for the wakeup timer. This integer value
> > +               represents the number of seconds between a suspend operation
> > +               (e.g., S3 suspend-to-RAM) and the time at which the wakeup
> > +               timer should fire.
> > [...]
> > diff --git a/drivers/soc/brcmstb/wktmr.c b/drivers/soc/brcmstb/wktmr.c
> > new file mode 100644
> > index 000000000000..89f989724d3c
> > --- /dev/null
> > +++ b/drivers/soc/brcmstb/wktmr.c
> > @@ -0,0 +1,242 @@
> > [...]
> > +
> > +static void brcmstb_waketmr_set_alarm(struct brcmstb_waketmr *timer,
> > +               unsigned int secs)
> > +{
> > +       unsigned int t;
> 
> Use u32.

Sure.

> > +
> > +       brcmstb_waketmr_clear_alarm(timer);
> > +
> > +       t = readl_relaxed(timer->base + BRCMSTB_WKTMR_COUNTER);
> > +       writel_relaxed(t + secs + 1, timer->base + BRCMSTB_WKTMR_ALARM);
> > +}
> > +
> > [...]
> > +static int brcmstb_waketmr_probe(struct platform_device *pdev)
> > +{
> > [...]
> > +       /*
> > +        * Set wakeup capability before requesting wakeup interrupt, so we can
> > +        * process boot-time "wakeups" (e.g., from S5 soft-off)
> > +        */
> > +       device_set_wakeup_capable(dev, true);
> > +       device_wakeup_enable(dev);
> > +
> > +       timer->irq = platform_get_irq(pdev, 0);
> > +       if ((int)timer->irq < 0)
> 
> Probably better to just have timer->irq be a signed int so you don't
> need this cast.

That's the only place where it needs to be signed. All other APIs are
unsigned, I think. But sure, I can change that.

> > [snip]
> 
> Acked-by: Gregory Fong <gregory.0xf0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Thanks for the review!

Brian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in

Re: [PATCH 5/7] soc: brcmstb: add wake-timer driver

[Florian Fainelli]

Le 06/18/15 17:11, Brian Norris a écrit :
> Useful for waking the system from suspend after a specified period of
> time.
> 
> This IP could potentially be supported as an RTC driver (for use with
> the 'rtcwake' utility), but it is not battery backed, so that's not a
> great fit. Implement a custom sysfs interface instead.

I would very much like to see this driver be implemented as a degenerate
RTC driver because this sorts of maps pretty well to the "rtcwake" use
mode, and this is a persistent clock source, and even a clock source as
well (I would rather avoid going the MFD route to expose these 3
"functions" though).

Thanks!
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 6/7] ARM: brcmstb: mask GIC IRQs on suspend

[Brian Norris]

Lazily-masked IRQs can cause system suspend problems (e.g., spurious
wakeups from WFI), so we need to be sure non-wakeup GIC interrupts get
masked, not just disabled, during system suspend.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 arch/arm/mach-bcm/brcmstb.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
index 3a60f7ee3f0c..8d9ec9d01306 100644
--- a/arch/arm/mach-bcm/brcmstb.c
+++ b/arch/arm/mach-bcm/brcmstb.c
@@ -12,11 +12,20 @@
  */
 
 #include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+static void __init brcmstb_init_irq(void)
+{
+	gic_set_irqchip_flags(IRQCHIP_MASK_ON_SUSPEND);
+	irqchip_init();
+}
+
 static const char *const brcmstb_match[] __initconst = {
 	"brcm,bcm7445",
 	"brcm,brcmstb",
@@ -25,4 +34,5 @@ static const char *const brcmstb_match[] __initconst = {
 
 DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
 	.dt_compat	= brcmstb_match,
+	.init_irq	= brcmstb_init_irq,
 MACHINE_END
-- 
1.9.1

Re: [PATCH 6/7] ARM: brcmstb: mask GIC IRQs on suspend

[Gregory Fong]

On Thu, Jun 18, 2015 at 5:11 PM, Brian Norris
<computersforpeace@gmail.com> wrote:
> Lazily-masked IRQs can cause system suspend problems (e.g., spurious
> wakeups from WFI), so we need to be sure non-wakeup GIC interrupts get
> masked, not just disabled, during system suspend.
>
> Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Acked-by: Gregory Fong <gregory.0xf0@gmail.com>

Re: [PATCH 6/7] ARM: brcmstb: mask GIC IRQs on suspend

[Florian Fainelli]

Le 06/18/15 17:11, Brian Norris a écrit :
> Lazily-masked IRQs can cause system suspend problems (e.g., spurious
> wakeups from WFI), so we need to be sure non-wakeup GIC interrupts get
> masked, not just disabled, during system suspend.
> 
> Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Dropped this patch, no longer needed as of 4.3-rc0 with
aec89ef72ba6c94420f599dcb684ed66937cdacf ("irqchip/gic: Enable
SKIP_SET_WAKE and MASK_ON_SUSPEND")
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 6/7] ARM: brcmstb: mask GIC IRQs on suspend

[Brian Norris]

On Sat, Sep 12, 2015 at 12:53:32PM -0700, Florian Fainelli wrote:
> Le 06/18/15 17:11, Brian Norris a écrit :
> > Lazily-masked IRQs can cause system suspend problems (e.g., spurious
> > wakeups from WFI), so we need to be sure non-wakeup GIC interrupts get
> > masked, not just disabled, during system suspend.
> > 
> > Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> Dropped this patch, no longer needed as of 4.3-rc0 with

Ooh, rc0! I didn't know we started doing sane numbering :)

> aec89ef72ba6c94420f599dcb684ed66937cdacf ("irqchip/gic: Enable
> SKIP_SET_WAKE and MASK_ON_SUSPEND")

Nice! I was wanting this done for a while, but I believe this approach
was rejected a few times before. Glad Sudeep dug to the bottom of the
issue to argue *why* that's the right thing to do.

Brian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 6/7] ARM: brcmstb: mask GIC IRQs on suspend

[Brian Norris]

One more thing:

On Sat, Sep 12, 2015 at 12:53:32PM -0700, Florian Fainelli wrote:
> Le 06/18/15 17:11, Brian Norris a écrit :
> > Lazily-masked IRQs can cause system suspend problems (e.g., spurious
> > wakeups from WFI), so we need to be sure non-wakeup GIC interrupts get
> > masked, not just disabled, during system suspend.
> > 
> > Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> Dropped this patch, no longer needed as of 4.3-rc0 with
> aec89ef72ba6c94420f599dcb684ed66937cdacf ("irqchip/gic: Enable
> SKIP_SET_WAKE and MASK_ON_SUSPEND")

With this patch dropped, then we really don't need
arch/arm/mach-bcm/brcmstb.c any more, AFAICT. Unless you have more plans
for this file, I can send a patch...

Brian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 6/7] ARM: brcmstb: mask GIC IRQs on suspend

[Florian Fainelli]

On 14/09/15 10:42, Brian Norris wrote:
> One more thing:
> 
> On Sat, Sep 12, 2015 at 12:53:32PM -0700, Florian Fainelli wrote:
>> Le 06/18/15 17:11, Brian Norris a écrit :
>>> Lazily-masked IRQs can cause system suspend problems (e.g., spurious
>>> wakeups from WFI), so we need to be sure non-wakeup GIC interrupts get
>>> masked, not just disabled, during system suspend.
>>>
>>> Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>
>> Dropped this patch, no longer needed as of 4.3-rc0 with
>> aec89ef72ba6c94420f599dcb684ed66937cdacf ("irqchip/gic: Enable
>> SKIP_SET_WAKE and MASK_ON_SUSPEND")
> 
> With this patch dropped, then we really don't need
> arch/arm/mach-bcm/brcmstb.c any more, AFAICT. Unless you have more plans
> for this file, I can send a patch...

I am in the process of cleaning up the BIU control register setup for
the memory controller write-pairing support to get that submitted, and
that needs to be initialized before SMP, so we will still need an entry
point in the machine code to do that.

Thanks!
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 7/7] ARM: dts: brcmstb: add BCM7445 system PM DT nodes

[Brian Norris]

Need the aon_pm_l2_intc, aon-ctrl, waketimer, boot SRAM, and
memory_controller descriptions.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 arch/arm/boot/dts/bcm7445.dtsi | 102 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58dcd666257c..5b1aeaf5ac40 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -119,6 +119,30 @@
 			interrupt-names = "hif";
 		};
 
+		aon_pm_l2_intc: interrupt-controller@410640 {
+			compatible = "brcm,l2-intc";
+			reg = <0x410640 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x40 0x0>;
+			interrupt-parent = <&gic>;
+			brcm,irq-can-wake;
+		};
+
+		aon-ctrl@410000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x410000 0x200>, <0x410200 0x400>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		waketimer@f0417580 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x417580 0x14>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupts = <3>;
+			interrupt-names = "timer";
+		};
+
 		nand: nand@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
@@ -169,6 +193,84 @@
 		};
 	};
 
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0xf1100000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memc@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+				};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@1 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@2 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+	};
+
+	sram@ffe00000 {
+		compatible = "brcm,boot-sram", "mmio-sram";
+		reg = <0x0 0xffe00000 0x0 0x10000>;
+	};
+
 	smpboot {
 		compatible = "brcm,brcmstb-smpboot";
 		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
-- 
1.9.1

Re: [PATCH 7/7] ARM: dts: brcmstb: add BCM7445 system PM DT nodes

[Florian Fainelli]

Le 06/18/15 17:11, Brian Norris a écrit :
> Need the aon_pm_l2_intc, aon-ctrl, waketimer, boot SRAM, and
> memory_controller descriptions.
> 
> Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Applied to devicetree/next sans the wake-timer node and the now
duplicate aon_pm_l2_intc entry, thanks!
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/7] soc: brcmstb: add system suspend support for STB SoCs

[Gregory Fong]

On Thu, Jun 18, 2015 at 5:11 PM, Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Hi,
>
> This patch set introduces system suspend/resume support for Broadcom STB SoCs.
> There are two suspend modes (S2 and S3) as well as a related low-power shutdown
> mode (S5).
>
> Along with the core PM support, include a driver for the wakeup-timer, which
> allows for simple testing of suspend/resume wakeup cycles.
>
> Brian
>
> Brian Norris (7):
>   Documentation: dt: brcmstb: add system PM bindings
>   Documentation: dt: brcmstb: add waketimer documentation
>   soc: add stubs for brcmstb SoC's
>   soc: brcmstb: add PM suspend/resume support (S2/S3/S5)
>   soc: brcmstb: add wake-timer driver
>   ARM: brcmstb: mask GIC IRQs on suspend
>   ARM: dts: brcmstb: add BCM7445 system PM DT nodes
>

I tested this series two ways: with the device tree built into the
bootloader (BOLT) on BCM7445 and by using
arch/arm/boot/dts/bcm7445-bcm97445svmb.dtb

With the device tree from BOLT, everything works fine.  Tested the
waketimer for S2, S3, and S5.

With the device tree in arch/arm/boot/dts/bcm7445-bcm97445svmb.dts, S2
works, but S3 and S5 do not.  It comes back up but doesn't reach the
prompt:

[    6.050808] PM: suspend of devices complete after 1.425 msecs
[    6.051760] PM: late suspend of devices complete after 0.947 msecs
[    6.052535] PM: noirq suspend of devices complete after 0.770 msecs
[    6.052537] Disabling non-boot CPUs ...
[    6.053005] CPU1: shutdown
[    6.065914] CPU2: shutdown
[    6.080756] CPU3: shutdown
[    6.095214] Enabling non-boot CPUs ...
[    6.111496] CPU1 is up
[    6.126934] CPU2 is up
[    6.142511] CPU3 is up
[    6.145308] PM: noirq resume of devices complete after 2.772 msecs
[    6.148022] PM: early resume of devices complete after 2.626 msecs
[    6.151017] PM: resume of devices complete after 2.976 msecs
[    6.212771] Restarting tasks ... done.
[[[ output stops here ]]]

I suspect there might be an issue somewhere in
[PATCH 7/7] ARM: dts: brcmstb: add BCM7445 system PM DT nodes.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/7] soc: brcmstb: add system suspend support for STB SoCs

[Brian Norris]

+ tglx, Kevin

On Thu, Jun 18, 2015 at 08:20:52PM -0700, Gregory Fong wrote:
> On Thu, Jun 18, 2015 at 5:11 PM, Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > This patch set introduces system suspend/resume support for Broadcom STB SoCs.
> > There are two suspend modes (S2 and S3) as well as a related low-power shutdown
> > mode (S5).
> >
> > Along with the core PM support, include a driver for the wakeup-timer, which
> > allows for simple testing of suspend/resume wakeup cycles.
> >
> > Brian
> >
> > Brian Norris (7):
> >   Documentation: dt: brcmstb: add system PM bindings
> >   Documentation: dt: brcmstb: add waketimer documentation
> >   soc: add stubs for brcmstb SoC's
> >   soc: brcmstb: add PM suspend/resume support (S2/S3/S5)
> >   soc: brcmstb: add wake-timer driver
> >   ARM: brcmstb: mask GIC IRQs on suspend
> >   ARM: dts: brcmstb: add BCM7445 system PM DT nodes
> >
> 
> I tested this series two ways: with the device tree built into the
> bootloader (BOLT) on BCM7445 and by using
> arch/arm/boot/dts/bcm7445-bcm97445svmb.dtb
> 
> With the device tree from BOLT, everything works fine.  Tested the
> waketimer for S2, S3, and S5.

Thanks for the testing!

> With the device tree in arch/arm/boot/dts/bcm7445-bcm97445svmb.dts, S2
> works, but S3 and S5 do not.  It comes back up but doesn't reach the
> prompt:
> 
> [    6.050808] PM: suspend of devices complete after 1.425 msecs
> [    6.051760] PM: late suspend of devices complete after 0.947 msecs
> [    6.052535] PM: noirq suspend of devices complete after 0.770 msecs
> [    6.052537] Disabling non-boot CPUs ...
> [    6.053005] CPU1: shutdown
> [    6.065914] CPU2: shutdown
> [    6.080756] CPU3: shutdown
> [    6.095214] Enabling non-boot CPUs ...
> [    6.111496] CPU1 is up
> [    6.126934] CPU2 is up
> [    6.142511] CPU3 is up
> [    6.145308] PM: noirq resume of devices complete after 2.772 msecs
> [    6.148022] PM: early resume of devices complete after 2.626 msecs
> [    6.151017] PM: resume of devices complete after 2.976 msecs
> [    6.212771] Restarting tasks ... done.
> [[[ output stops here ]]]

Right, I noticed this problem, but found that it was independent of the
core PM code. UART interrupts are dead, but nothing else is.

> I suspect there might be an issue somewhere in
> [PATCH 7/7] ARM: dts: brcmstb: add BCM7445 system PM DT nodes.

It's not a problem with patch 7, exactly, it's a problem with the
irqchip driver which handles the UART interrupt mask (irq-bcm7120-l2.c).
The problem is that with a trimmed down device tree (such as the one
found at arch/arm/boot/dts/bcm7445-bcm97445svmb.dtb), none of the child
interrupts of the 'irq0_intc' node are described -- we don't have device
tree nodes for them yet -- but we still require saving and restoring the
forwarding mask (see 'brcm,int-fwd-mask') in order for the UART
interrupts to continue operating.

This is all a problem because when irq_chip_generic::installed == 0, the
irq_{suspend,resume} functions never get called in irq-bcm7120-l2.c.

Anyway, I think this suggests that irq-bcm7120-l2.c needs a slightly
different semantics to its PM callbacks; they must be called regardless
of whether there are any child interrupts. I've cooked up some patches
for this and will send them shortly in reply to this thread.

Thanks,
Brian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in

Re: [PATCH 0/7] soc: brcmstb: add system suspend support for STB SoCs

[Brian Norris]

On Fri, Jun 19, 2015 at 3:41 PM, Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> + tglx, Kevin

^^ for real this time

> On Thu, Jun 18, 2015 at 08:20:52PM -0700, Gregory Fong wrote:
>> On Thu, Jun 18, 2015 at 5:11 PM, Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> > This patch set introduces system suspend/resume support for Broadcom STB SoCs.
>> > There are two suspend modes (S2 and S3) as well as a related low-power shutdown
>> > mode (S5).
>> >
>> > Along with the core PM support, include a driver for the wakeup-timer, which
>> > allows for simple testing of suspend/resume wakeup cycles.
>> >
>> > Brian
>> >
>> > Brian Norris (7):
>> >   Documentation: dt: brcmstb: add system PM bindings
>> >   Documentation: dt: brcmstb: add waketimer documentation
>> >   soc: add stubs for brcmstb SoC's
>> >   soc: brcmstb: add PM suspend/resume support (S2/S3/S5)
>> >   soc: brcmstb: add wake-timer driver
>> >   ARM: brcmstb: mask GIC IRQs on suspend
>> >   ARM: dts: brcmstb: add BCM7445 system PM DT nodes
>> >
>>
>> I tested this series two ways: with the device tree built into the
>> bootloader (BOLT) on BCM7445 and by using
>> arch/arm/boot/dts/bcm7445-bcm97445svmb.dtb
>>
>> With the device tree from BOLT, everything works fine.  Tested the
>> waketimer for S2, S3, and S5.
>
> Thanks for the testing!
>
>> With the device tree in arch/arm/boot/dts/bcm7445-bcm97445svmb.dts, S2
>> works, but S3 and S5 do not.  It comes back up but doesn't reach the
>> prompt:
>>
>> [    6.050808] PM: suspend of devices complete after 1.425 msecs
>> [    6.051760] PM: late suspend of devices complete after 0.947 msecs
>> [    6.052535] PM: noirq suspend of devices complete after 0.770 msecs
>> [    6.052537] Disabling non-boot CPUs ...
>> [    6.053005] CPU1: shutdown
>> [    6.065914] CPU2: shutdown
>> [    6.080756] CPU3: shutdown
>> [    6.095214] Enabling non-boot CPUs ...
>> [    6.111496] CPU1 is up
>> [    6.126934] CPU2 is up
>> [    6.142511] CPU3 is up
>> [    6.145308] PM: noirq resume of devices complete after 2.772 msecs
>> [    6.148022] PM: early resume of devices complete after 2.626 msecs
>> [    6.151017] PM: resume of devices complete after 2.976 msecs
>> [    6.212771] Restarting tasks ... done.
>> [[[ output stops here ]]]
>
> Right, I noticed this problem, but found that it was independent of the
> core PM code. UART interrupts are dead, but nothing else is.
>
>> I suspect there might be an issue somewhere in
>> [PATCH 7/7] ARM: dts: brcmstb: add BCM7445 system PM DT nodes.
>
> It's not a problem with patch 7, exactly, it's a problem with the
> irqchip driver which handles the UART interrupt mask (irq-bcm7120-l2.c).
> The problem is that with a trimmed down device tree (such as the one
> found at arch/arm/boot/dts/bcm7445-bcm97445svmb.dtb), none of the child
> interrupts of the 'irq0_intc' node are described -- we don't have device
> tree nodes for them yet -- but we still require saving and restoring the
> forwarding mask (see 'brcm,int-fwd-mask') in order for the UART
> interrupts to continue operating.
>
> This is all a problem because when irq_chip_generic::installed == 0, the
> irq_{suspend,resume} functions never get called in irq-bcm7120-l2.c.
>
> Anyway, I think this suggests that irq-bcm7120-l2.c needs a slightly
> different semantics to its PM callbacks; they must be called regardless
> of whether there are any child interrupts. I've cooked up some patches
> for this and will send them shortly in reply to this thread.
>
> Thanks,
> Brian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in

Re: [PATCH 0/7] soc: brcmstb: add system suspend support for STB SoCs

[Brian Norris]

+ others

On Thu, Jun 18, 2015 at 05:11:29PM -0700, Brian Norris wrote:
> Hi,
> 
> This patch set introduces system suspend/resume support for Broadcom STB SoCs.
> There are two suspend modes (S2 and S3) as well as a related low-power shutdown
> mode (S5).
> 
> Along with the core PM support, include a driver for the wakeup-timer, which
> allows for simple testing of suspend/resume wakeup cycles.
> 
> Brian

Somehow I completely missed out on sending this to a few of the right
places, like linux-pm and the PM maintainers. I guess I just trusted
get_maintainer.pl (which doesn't know what to do with drivers/soc/) too
much, and forgot to turn my brain on...

Anyway, if y'all can track down the patches via archives, feel free. Or
I will resend this shortly as a v2, with a few suggested fixes and with
a more complete CC list.

Regards,
Brian

> Brian Norris (7):
>   Documentation: dt: brcmstb: add system PM bindings
>   Documentation: dt: brcmstb: add waketimer documentation
>   soc: add stubs for brcmstb SoC's
>   soc: brcmstb: add PM suspend/resume support (S2/S3/S5)
>   soc: brcmstb: add wake-timer driver
>   ARM: brcmstb: mask GIC IRQs on suspend
>   ARM: dts: brcmstb: add BCM7445 system PM DT nodes
> 
>  .../ABI/testing/sysfs-driver-wktmr-brcmstb         |  12 +
>  .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt   | 142 +++++-
>  .../soc/brcmstb/brcm,brcmstb-waketimer.txt         |  20 +
>  arch/arm/boot/dts/bcm7445.dtsi                     | 102 ++++
>  arch/arm/mach-bcm/Kconfig                          |   1 +
>  arch/arm/mach-bcm/brcmstb.c                        |  10 +
>  drivers/soc/Kconfig                                |   1 +
>  drivers/soc/Makefile                               |   1 +
>  drivers/soc/brcmstb/Kconfig                        |  22 +
>  drivers/soc/brcmstb/Makefile                       |   4 +
>  drivers/soc/brcmstb/common.c                       |  33 ++
>  drivers/soc/brcmstb/pm/Makefile                    |   1 +
>  drivers/soc/brcmstb/pm/aon_defs.h                  |  85 ++++
>  drivers/soc/brcmstb/pm/pm.c                        | 512 +++++++++++++++++++++
>  drivers/soc/brcmstb/pm/pm.h                        |  40 ++
>  drivers/soc/brcmstb/pm/s2.S                        |  73 +++
>  drivers/soc/brcmstb/wktmr.c                        | 242 ++++++++++
>  include/soc/brcmstb/common.h                       |  15 +
>  18 files changed, 1314 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
>  create mode 100644 Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt
>  create mode 100644 drivers/soc/brcmstb/Kconfig
>  create mode 100644 drivers/soc/brcmstb/Makefile
>  create mode 100644 drivers/soc/brcmstb/common.c
>  create mode 100644 drivers/soc/brcmstb/pm/Makefile
>  create mode 100644 drivers/soc/brcmstb/pm/aon_defs.h
>  create mode 100644 drivers/soc/brcmstb/pm/pm.c
>  create mode 100644 drivers/soc/brcmstb/pm/pm.h
>  create mode 100644 drivers/soc/brcmstb/pm/s2.S
>  create mode 100644 drivers/soc/brcmstb/wktmr.c
>  create mode 100644 include/soc/brcmstb/common.h
> 
> -- 
> 1.9.1
> 

Re: [PATCH 0/7] soc: brcmstb: add system suspend support for STB SoCs

[Florian Fainelli]

Le 06/22/15 12:47, Brian Norris a écrit :
> + others
> 
> On Thu, Jun 18, 2015 at 05:11:29PM -0700, Brian Norris wrote:
>> Hi,
>>
>> This patch set introduces system suspend/resume support for Broadcom STB SoCs.
>> There are two suspend modes (S2 and S3) as well as a related low-power shutdown
>> mode (S5).
>>
>> Along with the core PM support, include a driver for the wakeup-timer, which
>> allows for simple testing of suspend/resume wakeup cycles.
>>
>> Brian
> 
> Somehow I completely missed out on sending this to a few of the right
> places, like linux-pm and the PM maintainers. I guess I just trusted
> get_maintainer.pl (which doesn't know what to do with drivers/soc/) too
> much, and forgot to turn my brain on...
> 
> Anyway, if y'all can track down the patches via archives, feel free. Or
> I will resend this shortly as a v2, with a few suggested fixes and with
> a more complete CC list.

Works for me, thanks for getting this out:

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

I would like some comments on the Device Tree binding portion so I can
take these patches and submit them for our next Broadcom arm-soc pull
requests, thanks!

> 
> Regards,
> Brian
> 
>> Brian Norris (7):
>>   Documentation: dt: brcmstb: add system PM bindings
>>   Documentation: dt: brcmstb: add waketimer documentation
>>   soc: add stubs for brcmstb SoC's
>>   soc: brcmstb: add PM suspend/resume support (S2/S3/S5)
>>   soc: brcmstb: add wake-timer driver
>>   ARM: brcmstb: mask GIC IRQs on suspend
>>   ARM: dts: brcmstb: add BCM7445 system PM DT nodes
>>
>>  .../ABI/testing/sysfs-driver-wktmr-brcmstb         |  12 +
>>  .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt   | 142 +++++-
>>  .../soc/brcmstb/brcm,brcmstb-waketimer.txt         |  20 +
>>  arch/arm/boot/dts/bcm7445.dtsi                     | 102 ++++
>>  arch/arm/mach-bcm/Kconfig                          |   1 +
>>  arch/arm/mach-bcm/brcmstb.c                        |  10 +
>>  drivers/soc/Kconfig                                |   1 +
>>  drivers/soc/Makefile                               |   1 +
>>  drivers/soc/brcmstb/Kconfig                        |  22 +
>>  drivers/soc/brcmstb/Makefile                       |   4 +
>>  drivers/soc/brcmstb/common.c                       |  33 ++
>>  drivers/soc/brcmstb/pm/Makefile                    |   1 +
>>  drivers/soc/brcmstb/pm/aon_defs.h                  |  85 ++++
>>  drivers/soc/brcmstb/pm/pm.c                        | 512 +++++++++++++++++++++
>>  drivers/soc/brcmstb/pm/pm.h                        |  40 ++
>>  drivers/soc/brcmstb/pm/s2.S                        |  73 +++
>>  drivers/soc/brcmstb/wktmr.c                        | 242 ++++++++++
>>  include/soc/brcmstb/common.h                       |  15 +
>>  18 files changed, 1314 insertions(+), 2 deletions(-)
>>  create mode 100644 Documentation/ABI/testing/sysfs-driver-wktmr-brcmstb
>>  create mode 100644 Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt
>>  create mode 100644 drivers/soc/brcmstb/Kconfig
>>  create mode 100644 drivers/soc/brcmstb/Makefile
>>  create mode 100644 drivers/soc/brcmstb/common.c
>>  create mode 100644 drivers/soc/brcmstb/pm/Makefile
>>  create mode 100644 drivers/soc/brcmstb/pm/aon_defs.h
>>  create mode 100644 drivers/soc/brcmstb/pm/pm.c
>>  create mode 100644 drivers/soc/brcmstb/pm/pm.h
>>  create mode 100644 drivers/soc/brcmstb/pm/s2.S
>>  create mode 100644 drivers/soc/brcmstb/wktmr.c
>>  create mode 100644 include/soc/brcmstb/common.h
>>
>> -- 
>> 1.9.1
>>


-- 
Florian