From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: Re: [linux-sunxi] Re: [PATCH 2/6] ARM: dts: sun7i: Enable USB DRC on Bananapi Date: Tue, 29 Sep 2015 10:26:37 +0200 Message-ID: <560A4B3D.4040007@redhat.com> References: <1442928966-6418-1-git-send-email-hdegoede@redhat.com> <1442928966-6418-2-git-send-email-hdegoede@redhat.com> <20150929080453.GN7104@lukather> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20150929080453.GN7104@lukather> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Maxime Ripard Cc: Chen-Yu Tsai , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org Hi, On 29-09-15 10:04, Maxime Ripard wrote: > On Tue, Sep 22, 2015 at 03:36:01PM +0200, Hans de Goede wrote: >> Enable the otg/drc usb controller on the Bananapi. >> >> Signed-off-by: Hans de Goede > > Applied all the other patches but this one. Thanks, seems you did not push this to your git.kernel.org repo though ? > Since we dropped the patch adding the regulators support on the > Bananapi until we figure out why the board crash, it doesn't compile > anymore. How about me doing a v2 of the regulators patch which removes the &cpu0 { cpu-supply = <®_dcdc2>; }; So that we do not get cpu voltage scaling, then the regulator changes should be a NOP, everything should just keep the u-boot set voltages, and we can enable oth support. And then when we've figured out a safe way to enable cpu voltage scaling we can do so with a follow up patch ? Is that a plan ? If so say yes and I'll do a v2 of these patches :) Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html