Re: [PATCH 1/4] dt-bindings: net: Broadcom iProc MDIO bus driver device tree binding

[Florian Fainelli <f.fainelli@gmail.com>]

On 30/09/15 13:32, Arun Parameswaran wrote:
> Add device tree binding documentation for the Broadcom iProc MDIO
> bus driver.
> 
> Signed-off-by: Arun Parameswaran <arunp@broadcom.com>
> ---
>  .../devicetree/bindings/net/brcm,iproc-mdio.txt    | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
> new file mode 100644
> index 0000000..689f97c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
> @@ -0,0 +1,23 @@
> +* Broadcom iProc MDIO bus controller
> +
> +Required properties:
> +- compatible: should be "brcm,iproc-mdio"
> +- reg: address and length of the register set for the MDIO interface
> +- #size-cells: must be 1
> +- #address-cells: must be 0
> +
> +Child nodes of this MDIO bus controller node are standard Ethernet PHY device
> +nodes as described in Documentation/devicetree/bindings/net/phy.txt
> +
> +Example:
> +
> +mdio@0x18002000 {

Sorry for not catching this earlier, you might want to drop the leading
0x here from your example, other than that:

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian