From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH 2/5] Documentation: add the binding file for Freescale imx7d ADC driver Date: Sun, 11 Oct 2015 14:31:35 +0100 Message-ID: <561A64B7.6000006@kernel.org> References: <1444301948-21721-1-git-send-email-haibo.chen@freescale.com> <1444301948-21721-2-git-send-email-haibo.chen@freescale.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1444301948-21721-2-git-send-email-haibo.chen@freescale.com> Sender: linux-kernel-owner@vger.kernel.org To: Haibo Chen , robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, shawnguo@kernel.org, kernel@pengutronix.de, mturquette@baylibre.com, sboyd@codeaurora.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, linux-iio@vger.kernel.org List-Id: devicetree@vger.kernel.org On 08/10/15 11:59, Haibo Chen wrote: > The patch adds the binding file for Freescale imx7d ADC driver. > > Signed-off-by: Haibo Chen Couple of trivial typos.. otherwise fine. > --- > .../devicetree/bindings/iio/adc/imx7d-adc.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt > > diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt > new file mode 100644 > index 0000000..6b21fd27 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt > @@ -0,0 +1,26 @@ > +Freescale imx7d ADC bindings > + > +The devicetree bingdings are for the nwe ADC driver written for > +imx7d SoC. bindings and new > + > +Required properties: > +- compatible: Should be "fsl,imx7d-adc" > +- reg: Offset and length of the register set for the ADC device > +- interrupts: The interrupt number for the ADC device > +- clocks: The root clock of the ADC controller > +- clock-names: Must contain "adc", matching entry in the clocks property > +- vref-supply: The regulator supply ADC reference voltage > + > +Optional properties: > +- num-channels: the number of channels used > + > +Example: > +adc1: adc@30610000 { > + compatible = "fsl,imx7d-adc"; > + reg = <0x30610000 0x10000>; > + interrupts = ; > + clocks = <&clks IMX7D_ADC_ROOT_CLK>; > + clock-names = "adc"; > + num-channels = <4>; > + vref-supply = <®_vcc_3v3_mcu>; > +}; >