Re: [PATCH v2 2/4] dmaengine: Add STM32 DMA driver

[Daniel Thompson <daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

On 14/10/15 14:17, M'boumba Cedric Madianga wrote:
> Hi Daniel,
>
>>>> +
>>>> +static int stm32_dma_remove(struct platform_device *pdev)
>>>> +{
>>>> +       struct stm32_dma_device *dmadev = platform_get_drvdata(pdev);
>>>> +
>>>> +       of_dma_controller_free(pdev->dev.of_node);
>>>> +
>>>> +       dma_async_device_unregister(&dmadev->ddev);
>>>> +
>>>> +       clk_disable_unprepare(dmadev->clk);
>>>
>>>
>>> What is the purpose of disabling/unpreparing the clock here?
>>> stm32_dma_alloc_chan_resources() and stm32_dma_free_chan_resources() should
>>> pair up and the clock should already be stopped.
>
> stm32_dma_remove() could be called during an on-going transfer during
> module unload.
> So in that case, it seems that disabling/unpreparing the clock is needed.

Really?

I think we need to be sure any on-going transfers are stopped.

There are multiple reasons for this, not least the risk of executing a 
callback that has been freed, but the one related to my point is that a 
single clk_disable_unprepare() will remain broken because if you don't 
know that the transfers have stopped then you don't know how many 
on-going transfers there are.


Daniel.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html