Re: [PATCH 2/5] arm: dts: lpc32xx: fix improper usage of ranges property

[Vladimir Zapolskiy <vz-ChpfBGZJDbMAvxtiuMwx3w@public.gmane.org>]

On 14.10.2015 16:52, Arnd Bergmann wrote:
> On Wednesday 14 October 2015 02:13:49 Vladimir Zapolskiy wrote:
>> Ok, practically it should work for my purposes, but the change must be
>> done along with added EMC device node description.
>>
>> I'm not so confident that it is correct to add description of static
>> memory banks to ahb node though, please give me a short confirmation,
> 
> The DT should reflect whichever memory ranges are accessible
> on the bus. I've looked up the memory map in the data sheet, and
> I think a reasonable representation would be
> 
> /ahb {
> 	ranges = <0x20000000 0x20000000 0x10000000>, /* AHB port 5 */
> 		 <0x30000000 0x30000000 0x10000000>, /* AHB port 6 */
> 		 <0x40000000 0x40000000 0x10000000>, /* AHB port 7 */
> 		 <0x80000000 0x80000000 0x40000000>, /* EMC DYCS0/1 */
> 		 <0xE0000000 0xE0000000 0x04000000>; /* EMC CS0-3 */
> 
> 	apb {
> 		ranges = <0x20080000 0x20080000 0x00020000>;
> 	};
> 
> };

A simpler version of this change in /ahb I successfully tested with EMC
yesterday:

-               ranges = <0x20000000 0x20000000 0x30000000>;
+               ranges = <0x20000000 0x20000000 0x30000000
+                         0xe0000000 0xe0000000 0x04000000>;


> alternatively, each AHB port could be a separate node, with a
> more direct translation like
> 
> /ahb5 {
> 	ranges = <0 0x20000000 0x10000000>;
> 
> 	apb {
> 		ranges = <0 0x80000 0x20000>;
> 	};
> };
> /ahb6 {
> 	ranges = <0 0x30000000 0x10000000>,	      /* AHB registers */
> 		 <0x80000000 0x80000000 0x40000000>, /* EMC DYCS0/1 */
> 		 <0xE0000000 0xE0000000 0x04000000>; /* EMC CS0-3 */
> 
> 	memory-controller@1080000 {
> 		reg = <0x1080000 0x10000>;
> 	};
> };
> ...
> 
> Does this make sense?

Yes, I personally would prefer to see the first version as the simplest
working one, if needed it should be converted to the second one later on.

>> then I'll send a change for inclusion of EMC description -- the one
>> above excluding clocks and clock-names properties, work on CCF is in
>> progress.
> 
> Ah, very nice! That should get us very close to multiplatform support!
> I've just tried building lpc32xx without the headers to check for
> other issues, and ended up with the patch below to get it building.
> It's clearly wrong, but it highlights a number of issues.

Sure, I'll review the highlighted problems, thanks.

--
With best wishes,
Vladimir
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html