Re: [PATCH v4 02/11] phy: exynos-ufs: add UFS PHY driver for EXYNOS SoC

[Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>]

Hi,

On Wednesday 14 October 2015 06:25 PM, Alim Akhtar wrote:
> From: Seungwon Jeon <essuuj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> This patch introduces Exynos UFS PHY driver. This driver
> supports to deal with phy calibration and power control
> according to UFS host driver's behavior.
> 
> Signed-off-by: Seungwon Jeon <essuuj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Alim Akhtar <alim.akhtar-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Cc: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
> ---
>  drivers/phy/Kconfig                |    7 +
>  drivers/phy/Makefile               |    1 +
>  drivers/phy/phy-exynos-ufs.c       |  257 ++++++++++++++++++++++++++++++++++++
>  drivers/phy/phy-exynos-ufs.h       |   88 ++++++++++++
>  drivers/phy/phy-exynos7-ufs.h      |   89 +++++++++++++
>  include/linux/phy/phy-exynos-ufs.h |  101 ++++++++++++++
>  6 files changed, 543 insertions(+)
>  create mode 100644 drivers/phy/phy-exynos-ufs.c
>  create mode 100644 drivers/phy/phy-exynos-ufs.h
>  create mode 100644 drivers/phy/phy-exynos7-ufs.h
>  create mode 100644 include/linux/phy/phy-exynos-ufs.h
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 47da573d0bab..499eec4a967c 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -371,4 +371,11 @@ config PHY_BRCMSTB_SATA
>  	  Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
>  	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
>  
> +config PHY_EXYNOS_UFS
> +	tristate "EXYNOS SoC series UFS PHY driver"
> +	depends on OF && ARCH_EXYNOS || COMPILE_TEST
> +	select GENERIC_PHY
> +	help
> +	  Support for UFS PHY on Samsung EXYNOS chipsets.
> +
>  endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index a5b18c18fc12..2a312ca20795 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-14nm.o
>  obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
>  obj-$(CONFIG_PHY_BRCMSTB_SATA)		+= phy-brcmstb-sata.o
>  obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
> +obj-$(CONFIG_PHY_EXYNOS_UFS)	+= phy-exynos-ufs.o
> diff --git a/drivers/phy/phy-exynos-ufs.c b/drivers/phy/phy-exynos-ufs.c
> new file mode 100644
> index 000000000000..77330b85e3f8
> --- /dev/null
> +++ b/drivers/phy/phy-exynos-ufs.c
> @@ -0,0 +1,257 @@
> +/*
> + * UFS PHY driver for Samsung EXYNOS SoC
> + *
> + * Copyright (C) 2015 Samsung Electronics Co., Ltd.
> + * Author: Seungwon Jeon <essuuj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/phy/phy-exynos-ufs.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include "phy-exynos-ufs.h"
> +
> +#define for_each_phy_lane(phy, i) \
> +	for (i = 0; i < (phy)->lane_cnt; i++)
> +#define for_each_phy_cfg(cfg) \
> +	for (; (cfg)->id; (cfg)++)
> +
> +#define PHY_DEF_LANE_CNT	1
> +
> +static void exynos_ufs_phy_config(struct exynos_ufs_phy *phy,
> +			const struct exynos_ufs_phy_cfg *cfg, u8 lane)
> +{
> +	enum {LANE_0, LANE_1}; /* lane index */
> +
> +	switch (lane) {
> +	case LANE_0:
> +		writel(cfg->val, (phy)->reg_pma + cfg->off_0);
> +		break;
> +	case LANE_1:
> +		if (cfg->id == PHY_TRSV_BLK)
> +			writel(cfg->val, (phy)->reg_pma + cfg->off_1);
> +		break;
> +	}
> +}
> +
> +static bool match_cfg_to_pwr_mode(u8 desc, u8 required_pwr)
> +{
> +	if (IS_PWR_MODE_ANY(desc))
> +		return true;
> +
> +	if (IS_PWR_MODE_HS(required_pwr) && IS_PWR_MODE_HS_ANY(desc))
> +		return true;
> +
> +	if (COMP_PWR_MODE(required_pwr, desc))
> +		return true;
> +
> +	if (COMP_PWR_MODE_MD(required_pwr, desc) &&
> +	    COMP_PWR_MODE_GEAR(required_pwr, desc) &&
> +	    COMP_PWR_MODE_SER(required_pwr, desc))
> +		return true;
> +
> +	return false;
> +}
> +
> +static int exynos_ufs_phy_calibrate(struct phy *phy,
> +				    enum phy_cfg_tag tag, u8 pwr)
> +{
> +	struct exynos_ufs_phy *ufs_phy = get_exynos_ufs_phy(phy);
> +	struct exynos_ufs_phy_cfg **cfgs = ufs_phy->cfg;
> +	const struct exynos_ufs_phy_cfg *cfg;
> +	int i;
> +
> +	if (unlikely(tag < CFG_PRE_INIT || tag >= CFG_TAG_MAX)) {
> +		dev_err(ufs_phy->dev, "invalid phy config index %d\n", tag);
> +		return -EINVAL;
> +	}
> +
> +	cfg = cfgs[tag];
> +	if (!cfg)
> +		goto out;
> +
> +	for_each_phy_cfg(cfg) {
> +		for_each_phy_lane(ufs_phy, i) {
> +			if (match_cfg_to_pwr_mode(cfg->desc, pwr))
> +				exynos_ufs_phy_config(ufs_phy, cfg, i);
> +		}
> +	}
> +
> +out:
> +	return 0;
> +}
> +
> +static void exynos_ufs_phy_set_lane_cnt(struct phy *phy, u8 lane_cnt)
> +{
> +	struct exynos_ufs_phy *ufs_phy = get_exynos_ufs_phy(phy);
> +
> +	ufs_phy->lane_cnt = lane_cnt;
> +}
> +
> +static int exynos_ufs_phy_wait_for_lock_acq(struct phy *phy)
> +{
> +	struct exynos_ufs_phy *ufs_phy = get_exynos_ufs_phy(phy);
> +	const unsigned int timeout_us = 100000;
> +	const unsigned int sleep_us = 10;
> +	u32 val;
> +	int err;
> +
> +	err = readl_poll_timeout(
> +			ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
> +			val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
> +	if (err) {
> +		dev_err(ufs_phy->dev,
> +			"failed to get phy pll lock acquisition %d\n", err);
> +		goto out;
> +	}
> +
> +	err = readl_poll_timeout(
> +			ufs_phy->reg_pma + PHY_APB_ADDR(PHY_CDR_LOCK_STATUS),
> +			val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
> +	if (err) {
> +		dev_err(ufs_phy->dev,
> +			"failed to get phy cdr lock acquisition %d\n", err);
> +		goto out;
> +	}
> +
> +out:
> +	return err;
> +}
> +
> +static int exynos_ufs_phy_power_on(struct phy *phy)
> +{
> +	struct exynos_ufs_phy *_phy = get_exynos_ufs_phy(phy);
> +
> +	exynos_ufs_phy_ctrl_isol(_phy, false);
> +	return 0;
> +}
> +
> +static int exynos_ufs_phy_power_off(struct phy *phy)
> +{
> +	struct exynos_ufs_phy *_phy = get_exynos_ufs_phy(phy);
> +
> +	exynos_ufs_phy_ctrl_isol(_phy, true);
> +	return 0;
> +}
> +
> +static struct phy_ops exynos_ufs_phy_ops = {
> +	.power_on	= exynos_ufs_phy_power_on,
> +	.power_off	= exynos_ufs_phy_power_off,
> +};
> +
> +static struct exynos_ufs_phy_specific_ops phy_specific_ops = {
> +	.calibrate_phy = exynos_ufs_phy_calibrate,
> +	.set_lane_cnt = exynos_ufs_phy_set_lane_cnt,
> +	.wait_for_lock_acq = exynos_ufs_phy_wait_for_lock_acq,
> +};

I'd like avoiding custom phy ops. Can you forward me the entire series
so that it helps me in reviewing the use of these ops?

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html