devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
Subject: Re: [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support
Date: Thu, 15 Oct 2015 10:08:37 +0300	[thread overview]
Message-ID: <561F50F5.9060909@ti.com> (raw)
In-Reply-To: <20151012205732.GW23801-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Tony,

On 10/12/2015 11:57 PM, Tony Lindgren wrote:
> * Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> [150914 09:32]:
>> * Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org> [150914 01:54]:
>>> Hi Tony,
>>>
>>> On 08/24/2015 10:19 AM, Peter Ujfalusi wrote:
>>>> Hi,
>>>>
>>>> this series will enable analog audio (via onboard aic310x codec) for dra7-evm,
>>>> dra72-evm and am57xx-beagle-x15 boards.
>>>> In these board McASP3 is connected to the codec and for the McASP3 we needed to
>>>> have the DMA crossbar in place since the request lines are not mapped by
>>>> default.
>>>
>>> Did you had a chance to look at this series?
>>
>> Looks OK to me, will look at it more once we have the fixes merged.
>>
>> Paul may have comments on the hwmod chage, looks like you forgot
>> to Cc him on it. Can you please resend that one with Paul in Cc?
> 
> Applying all the dts changes into omap-for-v4.3/dt thanks. Paul
> can pick up the hwmod change then after reviewing it.

Thanks for taking the DTS patches, however if Paul agrees with the way I think we can handle the McASP in DRA7xx then the patch which adds the mcasp3 node to dra7.dtsi needs to be replaced by:

From b6733f9ca96a997fab3d0455783e875dd9ae032b Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
Date: Tue, 24 Feb 2015 15:12:59 +0200
Subject: [PATCH v2 03/12] ARM: DTS: dra7: Add McASP3 node

Signed-off-by: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/dra7.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8fedddc35999..cde0a3cbf262 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1404,6 +1404,21 @@
 			status = "disabled";
 		};
 
+		mcasp3: mcasp@48468000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp3";
+			reg = <0x48468000 0x2000>;
+			reg-names = "mpu";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
-- 
2.6.1




-- 
Péter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-10-15  7:08 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-24  7:19 [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support Peter Ujfalusi
2015-08-24  7:19 ` [PATCH 01/11] ARM: OMAP: DRA7: hwmod: Add data for McASP3 Peter Ujfalusi
2015-08-24  7:19 ` [PATCH 02/11] ARM: DTS: dra7: Add McASP3 node Peter Ujfalusi
2015-08-24  7:19 ` [PATCH 03/11] ARM: DTS: dra7-evm: Rename mmc2_3v3 supply to evm_3v3_sw Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 04/11] ARM: DTS: dra7-evm: Add fixed regulator to be used by aic3106's DVDD Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 05/11] ARM: DTS: dra7-evm: Enable pcf8575 (0x26 address) on i2c2 bus Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 06/11] ARM: DTS: dra7-evm: Audio support Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 07/11] ARM: DTS: dra72-evm: Add fixed regulator representing DVDD supply for aic3106 Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 08/11] ARM: DTS: dra72-evm: Add gpio hog for vin6_sel_s0 to select audio Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 09/11] ARM: DTS: dra72-evm: Audio support Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 10/11] ARM: DTS: am57xx-beagle-x15: Add fixed regulator for aic3104's DVDD Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 11/11] ARM: DTS: am57xx-beagle-x15: Enable analog audio support Peter Ujfalusi
2015-09-14  8:50 ` [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support Peter Ujfalusi
     [not found]   ` <55F68A60.6050900-l0cyMroinI0@public.gmane.org>
2015-09-14 16:28     ` Tony Lindgren
2015-10-12 20:57       ` Tony Lindgren
     [not found]         ` <20151012205732.GW23801-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-10-15  7:08           ` Peter Ujfalusi [this message]
2015-10-15 14:09             ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=561F50F5.9060909@ti.com \
    --to=peter.ujfalusi-l0cymroini0@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=t-kristo-l0cyMroinI0@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).