From: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Brian Norris
<briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Xing Zheng <zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Masahiro Yamada
<yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
dbasehore-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
tony.xie-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
David Wu <david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
cf-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
Jianqun Xu <jay.xu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH] arm64: dts: rockchip: Add idle-states to device tree for rk3399
Date: Thu, 09 Aug 2018 22:09:42 +0200 [thread overview]
Message-ID: <5620784.b19SH5PkdR@phil> (raw)
In-Reply-To: <1467793254-10808-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Am Mittwoch, 6. Juli 2016, 10:20:54 CEST schrieb Caesar Wang:
> As the rk3399 ATF had been supported on ARM github [0], so we can add
> idle-states for rk3399.
> This patch adds idle-states bindings data collected through tests
> experiments (latency and energy consumption) on rk3399 evb2 board.
>
> You can see detail idle-states definitions on document [1].
>
> * arm,psci-suspend-param: power_state parameter to pass to the PSCI
> suspend call.
> * entry-latency: Worst case latency required to enter the idle state. The
> exit-latency may be guaranteed only after entry-latency has passed.
> * min-residency: Minimum period, including preparation and entry, for a
> given idle state to be worthwhile energywise
> * min-residency: Minimum period, including preparation and entry, for a
> given idle state to be worthwhile energywise.
>
> [0]:
> https://github.com/ARM-software/arm-trusted-firmware
> [1]:
> Documentation/devicetree/bindings/arm/psci.txt
> Documentation/devicetree/bindings/arm/idle-states.txt
>
> Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Looks like this patch slipped through the cracks and nobody reposted
them over time.
> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index a6dd623..12ce265 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -101,6 +101,18 @@
> };
> };
>
> + idle-states {
> + entry-method = "psci";
> + cpu_sleep: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <350>;
> + exit-latency-us = <600>;
> + min-residency-us = <1150>;
Looking at the chromeos kernel, there are some more patches adapting
this idle-state to use different timings.
There also was a cluster-idle state added for a while but that seems to
cause audio issues according to the CrOS history.
In any case, I'll try to look at this shortly.
Heiko
next prev parent reply other threads:[~2018-08-09 20:09 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-06 8:20 [PATCH] arm64: dts: rockchip: Add idle-states to device tree for rk3399 Caesar Wang
[not found] ` <1467793254-10808-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2018-08-09 20:09 ` Heiko Stuebner [this message]
2018-08-12 16:24 ` Tao Huang
2018-08-13 8:25 ` Heiko Stuebner
2018-08-13 8:59 ` Tao Huang
-- strict thread matches above, loose matches on Subject: below --
2018-08-24 10:02 Tony Xie
2018-08-24 10:03 ` Tony Xie
2018-08-29 12:49 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5620784.b19SH5PkdR@phil \
--to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
--cc=briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=cf-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=dbasehore-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=jay.xu-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tony.xie-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
--cc=wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org \
--cc=zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).