Re: [PATCH 04/10] phy: phy_brcmstb_sata: make the driver buildable on BMIPS_GENERIC

[Kishon Vijay Abraham I <kishon@ti.com>]

+Brian Norris

Hi,

On Friday 23 October 2015 07:14 AM, Jaedon Shin wrote:
> The BCM7xxx ARM and MIPS platforms share a similar hardware block for AHCI
> SATA3 PHY.
> 
> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
> ---
>  drivers/phy/Kconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 47da573d0bab..c83e48661fd7 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -364,11 +364,11 @@ config PHY_TUSB1210
>  
>  config PHY_BRCMSTB_SATA
>  	tristate "Broadcom STB SATA PHY driver"
> -	depends on ARCH_BRCMSTB
> +	depends on ARCH_BRCMSTB || BMIPS_GENERIC

Nice to see the same driver is been used across multiple platforms.
Cc'ed Brian who is the author of brcmstb-sata.c

Thanks
Kishon
>  	depends on OF
>  	select GENERIC_PHY
>  	help
> -	  Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
> +	  Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
>  	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
>  
>  endmenu
>