From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Garry Subject: Re: [PATCH v2 02/32] devicetree: bindings: scsi: HiSi SAS Date: Mon, 26 Oct 2015 14:55:55 +0000 Message-ID: <562E3EFB.6000409@huawei.com> References: <1445868903-183817-1-git-send-email-john.garry@huawei.com> <1445868903-183817-3-git-send-email-john.garry@huawei.com> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1445868903-183817-3-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: JBottomley-wo1vFcy6AUs@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, arnd-r2nGTMty4D4@public.gmane.org Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org, john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org, hare-l3A5Bk7waGM@public.gmane.org, xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org, zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org List-Id: devicetree@vger.kernel.org On 26/10/2015 14:14, John Garry wrote: > Add devicetree bindings for HiSilicon SAS driver. > > Signed-off-by: John Garry > --- > .../devicetree/bindings/scsi/hisilicon-sas.txt | 70 ++++++++++++++++++++++ > 1 file changed, 70 insertions(+) > create mode 100644 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt > > diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt > new file mode 100644 > index 0000000..d1e7b2a > --- /dev/null > +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt > @@ -0,0 +1,70 @@ > +* HiSilicon SAS controller > + > +The HiSilicon SAS controller supports SAS/SATA. > + > +Main node required properties: > + - compatible : value should be as follows: > + (a) "hisilicon,sas-controller-v1" for v1 of HiSilicon SAS controller IP I accidently omitted new property sas-addr for v2 patchset; here is what it should look like: - sas-addr : array of 8 bytes for host SAS address > + - reg : Address and length of the SAS register > + - hisilicon,sas-syscon: phandle of syscon used for sas control > + - ctrl-reg : offset to the following SAS control registers (in order): > + - reset assert > + - clock disable > + - reset status > + - reset de-assert > + - clock enable > + - queue-count : number of delivery and completion queues in the controller > + - phy-count : number of phys accessible by the controller > + - interrupts : Interrupts for phys, completion queues, and fatal > + interrupts: > + - Each phy has 3 interrupt sources: > + - broadcast > + - phyup > + - abnormal > + - Each completion queue has 1 interrupt source > + - Each controller has 2 fatal interrupt sources: > + - ECC > + - AXI bus > + > +* HiSilicon SAS syscon > + > +Required properties: > +- compatible: should be "hisilicon,sas-ctrl", "syscon" > +- reg: offset and length of the syscon sas-ctrl registers > + > + > +Example: > + sas_ctrl0: sas_ctrl@c0000000 { > + compatible = "hisilicon,sas-ctrl", "syscon"; > + reg = <0x0 0xc0000000 0x0 0x10000>; > + }; > + > + sas0: sas@c1000000 { > + compatible = "hisilicon,sas-controller-v1"; sas-addr = [50 01 88 20 16 00 00 0a]; > + reg = <0x0 0xc1000000 0x0 0x10000>; > + hisilicon,sas-syscon = <&sas_ctrl0>; > + ctrl-reg = <0xa60 0x33c 0x5a30 0xa64 0x338>; > + queue-count = <32>; > + phy-count = <8>; > + dma-coherent; > + interrupt-parent = <&mbigen_dsa>; > + interrupts = <259 4>, <263 4>,<264 4>,/* phy irq(0~79) */ > + <269 4>,<273 4>,<274 4>,/* phy irq(0~79) */ > + <279 4>,<283 4>,<284 4>,/* phy irq(0~79) */ > + <289 4>,<293 4>,<294 4>,/* phy irq(0~79) */ > + <299 4>,<303 4>,<304 4>,/* phy irq(0~79) */ > + <309 4>,<313 4>,<314 4>,/* phy irq(0~79) */ > + <319 4>,<323 4>,<324 4>,/* phy irq(0~79) */ > + <329 4>,<333 4>,<334 4>,/* phy irq(0~79) */ > + <336 1>,<337 1>,<338 1>,<339 1>,<340 1>, > + <341 1>,<342 1>,<343 1>,/* cq irq (80~111) */ > + <344 1>,<345 1>,<346 1>,<347 1>,<348 1>, > + <349 1>,<350 1>,<351 1>,/* cq irq (80~111) */ > + <352 1>,<353 1>,<354 1>,<355 1>,<356 1>, > + <357 1>,<358 1>,<359 1>,/* cq irq (80~111) */ > + <360 1>,<361 1>,<362 1>,<363 1>,<364 1>, > + <365 1>,<366 1>,<367 1>,/* cq irq (80~111) */ > + <376 4>,/* chip fatal error irq(120) */ > + <381 4>;/* chip fatal error irq(125) */ > + status = "disabled"; > + }; > Comment on new property sas-addr added. John -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html