From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ray Jui Subject: Re: [PATCH v2 0/3] clk: Broadcom BCM63138 support Date: Mon, 26 Oct 2015 21:25:14 -0700 Message-ID: <562EFCAA.9010100@broadcom.com> References: <1445917997-3629-1-git-send-email-f.fainelli@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1445917997-3629-1-git-send-email-f.fainelli@gmail.com> Sender: linux-clk-owner@vger.kernel.org To: Florian Fainelli , linux-clk@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, jonmason@broadcom.com, sboyd@codeaurora.org, mturquette@baylibre.com, linux@arm.linux.org.uk, sbranden@broadcom.com List-Id: devicetree@vger.kernel.org On 10/26/2015 8:53 PM, Florian Fainelli wrote: > Hi all, > > This patch series adds support for the Broadcom BCM63138 DSL SoCs > clocking framework. > > Since the HW is identical to the one found in Broadcom iProc SoCs, but the > integration is different (obviously), there is still a new compatible string > introduced just in case we happen to find issues in the future. > > This applies on top of clk/next as of > 679c51cffc3b316bd89ecc91ef92603dd6d4fc68 ("clk: Add stubs for of_clk_*() APIs when CONFIG_OF=n") > > Since there is an obvious dependency between patch 2 and 3, we can either > merge this through the Clock tree or via a future arm-soc pull requests > for Broadcom SoCs. > > Florian Fainelli (3): > clk: iproc: Extend binding to cover BCM63138 > clk: bcm: Add BCM63138 clock support > ARM: dts: BCM63xx: Add ARMPLL device tree nodes > > .../bindings/clock/brcm,iproc-clocks.txt | 5 +++ > arch/arm/boot/dts/bcm63138.dtsi | 39 ++++++++++++++++------ > drivers/clk/bcm/Kconfig | 10 ++++++ > drivers/clk/bcm/Makefile | 1 + > drivers/clk/bcm/clk-bcm63xx.c | 22 ++++++++++++ > 5 files changed, 67 insertions(+), 10 deletions(-) > create mode 100644 drivers/clk/bcm/clk-bcm63xx.c > The entire patch set looks good to me. Reviewed-by: Ray Jui Thanks, Ray