From: "Kim, Milo" <milo.kim-l0cyMroinI0@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 00/16] Support TI LMU devices
Date: Mon, 2 Nov 2015 14:32:43 +0900 [thread overview]
Message-ID: <5636F57B.7020903@ti.com> (raw)
In-Reply-To: <1446440483-6948-1-git-send-email-milo.kim-l0cyMroinI0@public.gmane.org>
My apologies for sending without no-chain-reply-to option.
So, I've resent the patch-set named 'PATCH RESEND 00/16 .. 16/16'.
Best regards,
Milo
On 11/2/2015 2:01 PM, Milo Kim wrote:
> TI LMU(Lighting Management Unit) driver supports lighting devices below.
>
> Enable pin Backlights HWMON LEDs Regulators
> ---------- ---------- ----- ---- ------------
> LM3532 o o x x x
> LM3631 o o x x 5 regulators
> LM3632 o o x x 3 regulators
> LM3633 o o o o x
> LM3695 o o x x x
> LM3697 o o o x x
>
> This patch-set consists of several parts below.
>
> DT bindings : Binding information for each module
> TI LMU MFD : Device registration, HW enable pin control and
> I2C register access
> TI LMU backlight : Common driver for TI LMU backlight devices
> Each backlight driver : Chip dependent code
> HWMON : LMU hardware fault monitoring driver
> LM3633 LED : LED subsystem and dimming pattern generation
> supported
> LM363X regulator : LM3631 and LM3632 regulator driver for the
> display bias
>
> Git location:
> Please refer to the location below. Branch name is 'ti-lmu'.
> git clone -b ti-lmu https://github.com/milokim/linux.git
>
> Milo Kim (16):
> Documentation: dt-bindings: mfd: add TI LMU device binding information
> Documentation: dt-bindings: backlight: add TI LMU backlight binding
> information
> Documentation: dt-bindings: hwmon: add TI LMU HWMON binding
> information
> Documentation: dt-bindings: leds: add LM3633 LED binding information
> Documentation: dt-bindings: regulator: add LM363x regulator binding
> information
> mfd: add TI LMU driver
> backlight: add TI LMU backlight common driver
> backlight: ti-lmu-backlight: add LM3532 driver
> backlight: ti-lmu-backlight: add LM3631 driver
> backlight: ti-lmu-backlight: add LM3632 driver
> backlight: ti-lmu-backlight: add LM3633 driver
> backlight: ti-lmu-backlight: add LM3695 driver
> backlight: ti-lmu-backlight: add LM3697 driver
> hwmon: add TI LMU hardware fault monitoring driver
> leds: add LM3633 driver
> regulator: add LM363X driver
>
> Documentation/ABI/testing/sysfs-class-led-lm3633 | 60 ++
> .../devicetree/bindings/hwmon/ti-lmu-hwmon.txt | 12 +
> .../devicetree/bindings/leds/leds-lm3633.txt | 28 +
> Documentation/devicetree/bindings/mfd/ti-lmu.txt | 282 ++++++++
> .../bindings/regulator/lm363x-regulator.txt | 28 +
> .../bindings/video/backlight/ti-lmu-backlight.txt | 67 ++
> drivers/hwmon/Kconfig | 10 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/ti-lmu-hwmon.c | 393 +++++++++++
> drivers/leds/Kconfig | 10 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-lm3633.c | 749 +++++++++++++++++++++
> drivers/mfd/Kconfig | 12 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/ti-lmu.c | 324 +++++++++
> drivers/regulator/Kconfig | 9 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/lm363x-regulator.c | 349 ++++++++++
> drivers/video/backlight/Kconfig | 62 ++
> drivers/video/backlight/Makefile | 7 +
> drivers/video/backlight/lm3532_bl.c | 183 +++++
> drivers/video/backlight/lm3631_bl.c | 129 ++++
> drivers/video/backlight/lm3632_bl.c | 125 ++++
> drivers/video/backlight/lm3633_bl.c | 210 ++++++
> drivers/video/backlight/lm3695_bl.c | 91 +++
> drivers/video/backlight/lm3697_bl.c | 187 +++++
> drivers/video/backlight/ti-lmu-backlight.c | 429 ++++++++++++
> drivers/video/backlight/ti-lmu-backlight.h | 152 +++++
> include/linux/mfd/ti-lmu-register.h | 277 ++++++++
> include/linux/mfd/ti-lmu.h | 81 +++
> 30 files changed, 4270 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-class-led-lm3633
> create mode 100644 Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt
> create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3633.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/ti-lmu.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
> create mode 100644 Documentation/devicetree/bindings/video/backlight/ti-lmu-backlight.txt
> create mode 100644 drivers/hwmon/ti-lmu-hwmon.c
> create mode 100644 drivers/leds/leds-lm3633.c
> create mode 100644 drivers/mfd/ti-lmu.c
> create mode 100644 drivers/regulator/lm363x-regulator.c
> create mode 100644 drivers/video/backlight/lm3532_bl.c
> create mode 100644 drivers/video/backlight/lm3631_bl.c
> create mode 100644 drivers/video/backlight/lm3632_bl.c
> create mode 100644 drivers/video/backlight/lm3633_bl.c
> create mode 100644 drivers/video/backlight/lm3695_bl.c
> create mode 100644 drivers/video/backlight/lm3697_bl.c
> create mode 100644 drivers/video/backlight/ti-lmu-backlight.c
> create mode 100644 drivers/video/backlight/ti-lmu-backlight.h
> create mode 100644 include/linux/mfd/ti-lmu-register.h
> create mode 100644 include/linux/mfd/ti-lmu.h
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2015-11-02 5:32 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-02 5:01 [PATCH 00/16] Support TI LMU devices Milo Kim
2015-11-02 5:01 ` [PATCH 01/16] Documentation: dt-bindings: mfd: add TI LMU device binding information Milo Kim
2015-11-02 5:01 ` [PATCH 02/16] Documentation: dt-bindings: backlight: add TI LMU backlight " Milo Kim
2015-11-02 5:01 ` [PATCH 03/16] Documentation: dt-bindings: hwmon: add TI LMU HWMON " Milo Kim
2015-11-02 5:01 ` [PATCH 04/16] Documentation: dt-bindings: leds: add LM3633 LED " Milo Kim
2015-11-02 5:01 ` [PATCH 05/16] Documentation: dt-bindings: regulator: add LM363x regulator " Milo Kim
2015-11-02 5:01 ` [PATCH 06/16] mfd: add TI LMU driver Milo Kim
2015-11-02 5:01 ` [PATCH 07/16] backlight: add TI LMU backlight common driver Milo Kim
2015-11-02 5:01 ` [PATCH 08/16] backlight: ti-lmu-backlight: add LM3532 driver Milo Kim
2015-11-02 5:01 ` [PATCH 09/16] backlight: ti-lmu-backlight: add LM3631 driver Milo Kim
2015-11-02 5:01 ` [PATCH 10/16] backlight: ti-lmu-backlight: add LM3632 driver Milo Kim
[not found] ` <1446440483-6948-11-git-send-email-milo.kim-l0cyMroinI0@public.gmane.org>
2015-11-02 5:01 ` [PATCH 11/16] backlight: ti-lmu-backlight: add LM3633 driver Milo Kim
2015-11-02 5:01 ` [PATCH 12/16] backlight: ti-lmu-backlight: add LM3695 driver Milo Kim
2015-11-02 5:01 ` [PATCH 13/16] backlight: ti-lmu-backlight: add LM3697 driver Milo Kim
2015-11-02 5:01 ` [PATCH 14/16] hwmon: add TI LMU hardware fault monitoring driver Milo Kim
2015-11-02 5:01 ` [PATCH 15/16] leds: add LM3633 driver Milo Kim
2015-11-02 5:01 ` [PATCH 16/16] regulator: add LM363X driver Milo Kim
[not found] ` <1446440483-6948-5-git-send-email-milo.kim-l0cyMroinI0@public.gmane.org>
2015-11-02 14:53 ` [PATCH 04/16] Documentation: dt-bindings: leds: add LM3633 LED binding information Rob Herring
2015-11-03 7:05 ` Kim, Milo
[not found] ` <1446440483-6948-1-git-send-email-milo.kim-l0cyMroinI0@public.gmane.org>
2015-11-02 5:32 ` Kim, Milo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5636F57B.7020903@ti.com \
--to=milo.kim-l0cymroini0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).