From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Zhong Subject: Re: [PATCH v3 00/12] Add mipi dsi support for rk3288 Date: Fri, 20 Nov 2015 15:02:13 +0800 Message-ID: <564EC575.90109@rock-chips.com> References: <1447904131-29328-1-git-send-email-zyw@rock-chips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-clk-owner@vger.kernel.org To: Emil Velikov Cc: =?UTF-8?Q?Heiko_St=c3=bcbner?= , linux-rockchip , Mark Yao , Mark Rutland , Michael Turquette , Kever Yang , ML dri-devel , "Linux-Kernel@Vger. Kernel. Org" , linux-clk@vger.kernel.org, Vincent Palatin , Jeff Chen , Ajay Kumar , Andrew Bresticker , Russell King , Thierry Reding , devicetree@vger.kernel.org, Alexandru M Stan , Pawel Moll , Ian Campbell , Rob Herring , Roger Chen Russell King List-Id: devicetree@vger.kernel.org Hi Emil On 11/19/2015 10:41 PM, Emil Velikov wrote: > On 19 November 2015 at 03:35, Chris Zhong wrote: >> The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller >> IP. This series adds support for a Synopsys DesignWare MIPI DSI host >> controller DRM bridge driver and a rockchip MIPI DSI specific DRM >> driver. >> >> This series also includes a DRM panel driver for BOE TV080WUM-NL0 panel. >> This panel only use the MIPI DSI video mode. >> >> The MIPI DSI feature is tested on rk3288 evb board, backport them to >> chrome os kernel v3.14, and it can display normally. >> >> This patchset is base on the patchset from Ying.liu@freescale.com. >> >> >> >> Changes in v3: >> move the dw_mipi_dsi.txt to Documentation/devicetree/bindings/display/bridge >> move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/ >> move boe,tv080wum-nl0.txt to bindings/display/panel/ >> >> Changes in v2: >> add the mipi clk id in a single patch >> As Thierry.Reding comment, add a documentation for this panel. >> >> Chris Zhong (10): >> clk: rockchip: add id for mipidsi sclk on rk3288 >> clk: rockchip: add mipidsi clocks on rk3288 >> drm/rockchip: return a true clock rate to adjusted_mode >> drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver > Did you actually rewrite the patch from Liu Ying ? I modify the dw_mipi_dsi.c based on the patch from Liu Ying. > Out of curiosity what was the obstacle of this work getting merged ? There are different version dw controller, and it is too hard to merge them, since most registers are different. > >> drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller >> Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver >> ARM: dts: rockchip: add rk3288 mipi_dsi nodes >> drm/panel: simple: Add support for BOE TV080WUM-NL0 >> drm/panel: simple: Add boe,tv080wum-nl0 simple panel device tree >> binding > As the DT people will tell you - there is no BOE vendor in > bindings/vendor-prefixes.txt. Yes, I have post a verdor patch in v2 series, Maybe I should add it back to series with Acked-by: Rob Herring > >> ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb >> >> Liu Ying (2): >> drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format >> Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM >> bridge driver >> > >From the above 12 patches only ~6 reached this mailing list is that > intentional ? Previously I've seen people CC dri-devel for their > panel/bridge DT patches. I use the patman to post the series, forgot to add you and Thierry to the to-list. I will fix in next version series. Thanks for your reply. > > Regards, > Emil > > >