* [PATCH v3 2/3] usb: phy: msm: fix connect/disconnect bug for dragonboard OTG port
2015-11-20 23:20 [PATCH v3 1/3] Documentation: dt-bindings: add async_irq to msm_hsusb Tim Bird
@ 2015-11-20 23:20 ` Tim Bird
[not found] ` <1448061641-31672-1-git-send-email-tim.bird-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Tim Bird @ 2015-11-20 23:20 UTC (permalink / raw)
To: Peter.Chen, robh+dt, pawel.moll, mark.rutland
Cc: gregkh, balbi, Bjorn.Andersson, linux-usb, devicetree,
linux-arm-msm, linux-kernel, tbird20d, tim.bird
Add support for async_irq to wake up driver from low power mode.
Without this, the power management code never calls resume.
Remove a spurious interrupt enable in the driver resume function.
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
---
drivers/usb/phy/phy-msm-usb.c | 17 ++++++++++++++++-
include/linux/usb/msm_hsusb.h | 1 +
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index e40a071..04fb056 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -648,7 +648,6 @@ skip_phy_resume:
if (motg->async_int) {
motg->async_int = 0;
pm_runtime_put(phy->dev);
- enable_irq(motg->irq);
}
dev_info(phy->dev, "USB exited from low power mode\n");
@@ -1732,6 +1731,12 @@ static int msm_otg_probe(struct platform_device *pdev)
return motg->irq;
}
+ motg->async_irq = platform_get_irq_byname(pdev, "async");
+ if (motg->async_irq < 0) {
+ dev_err(&pdev->dev, "platform_get_irq for async irq failed\n");
+ motg->async_irq = 0;
+ }
+
regs[0].supply = "vddcx";
regs[1].supply = "v3p3";
regs[2].supply = "v1p8";
@@ -1781,6 +1786,16 @@ static int msm_otg_probe(struct platform_device *pdev)
goto disable_ldo;
}
+ if (motg->async_irq) {
+ ret = devm_request_irq(&pdev->dev, motg->async_irq,
+ msm_otg_irq, IRQF_TRIGGER_RISING,
+ "msm_otg", motg);
+ if (ret) {
+ dev_err(&pdev->dev, "request irq failed (ASYNC INT)\n");
+ goto disable_ldo;
+ }
+ }
+
phy->init = msm_phy_init;
phy->set_power = msm_otg_set_power;
phy->notify_disconnect = msm_phy_notify_disconnect;
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 8c8f685..08c67a3 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -164,6 +164,7 @@ struct msm_otg {
struct usb_phy phy;
struct msm_otg_platform_data *pdata;
int irq;
+ int async_irq;
struct clk *clk;
struct clk *pclk;
struct clk *core_clk;
--
1.8.2.2
^ permalink raw reply related [flat|nested] 6+ messages in thread[parent not found: <1448061641-31672-1-git-send-email-tim.bird-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>]
* [PATCH v3 3/3] usb: chipidea: register driver as a peripheral with the phy
[not found] ` <1448061641-31672-1-git-send-email-tim.bird-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
@ 2015-11-20 23:20 ` Tim Bird
0 siblings, 0 replies; 6+ messages in thread
From: Tim Bird @ 2015-11-20 23:20 UTC (permalink / raw)
To: Peter.Chen-KZfg59tc24xl57MIdRCFDg, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8
Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, balbi-l0cyMroinI0,
Bjorn.Andersson-/MT0OVThwyLZJqsBc5GL+g,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
tbird20d-Re5JQEeQqe8AvxtiuMwx3w, tim.bird-/MT0OVThwyLZJqsBc5GL+g
Register the chipidea driver with the phy, so that the phy
driver can kick the gadget driver when it resumes from low power.
The phy-msm-usb (Qualcomm) driver requires this in order to
recover gadget operation after you disconnect the USB cable
and reconnect it.
Signed-off-by: Tim Bird <tim.bird-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
---
drivers/usb/chipidea/udc.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 8223fe7..06234cd 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1890,6 +1890,12 @@ static int udc_start(struct ci_hdrc *ci)
ci->gadget.ep0 = &ci->ep0in->ep;
+ if (ci->usb_phy) {
+ retval = otg_set_peripheral(ci->usb_phy->otg, &ci->gadget);
+ if (retval)
+ goto destroy_eps;
+ }
+
retval = usb_add_gadget_udc(dev, &ci->gadget);
if (retval)
goto destroy_eps;
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/3] Documentation: dt-bindings: add async_irq to msm_hsusb
2015-11-20 23:20 [PATCH v3 1/3] Documentation: dt-bindings: add async_irq to msm_hsusb Tim Bird
2015-11-20 23:20 ` [PATCH v3 2/3] usb: phy: msm: fix connect/disconnect bug for dragonboard OTG port Tim Bird
[not found] ` <1448061641-31672-1-git-send-email-tim.bird-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
@ 2015-11-20 23:22 ` Tim Bird
2015-11-20 23:22 ` Arnd Bergmann
3 siblings, 0 replies; 6+ messages in thread
From: Tim Bird @ 2015-11-20 23:22 UTC (permalink / raw)
To: Peter.Chen@freescale.com, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com
Cc: gregkh@linuxfoundation.org, balbi@ti.com, Andersson, Björn,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
tbird20d@gmail.com
On 11/20/2015 03:20 PM, Tim Bird wrote:
> Add optional async_irq to msm_hsusb binding doc.
>
> Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
> Acked-by: Rob Herring <robh@kernel.org>
I probably should have taken this Acked-by by Rob off. Sorry about that.
-- Tim
> ---
> Documentation/devicetree/bindings/usb/msm-hsusb.txt | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> index 8654a3e..bb2b304 100644
> --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> @@ -23,7 +23,12 @@ Required properties:
> "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY
>
> - regs: Offset and length of the register set in the memory map
> -- interrupts: interrupt-specifier for the OTG interrupt.
> +- interrupts: interrupt-specifier for the OTG interrupts
> +
> +- interrupt-names: Should contain the following:
> + "core" USB core interrupt
> + "async" Asynchronous interrupt to wake up from low power mode
> + (optional)
>
> - clocks: A list of phandle + clock-specifier pairs for the
> clocks listed in clock-names
> @@ -89,7 +94,8 @@ Example HSUSB OTG controller device node:
> usb@f9a55000 {
> compatible = "qcom,usb-otg-snps";
> reg = <0xf9a55000 0x400>;
> - interrupts = <0 134 0>;
> + interrupts = <0 134 0>, <0 140 0>;
> + interrupt-names = "core_irq", "async_irq";
> dr_mode = "peripheral";
>
> clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v3 1/3] Documentation: dt-bindings: add async_irq to msm_hsusb
2015-11-20 23:20 [PATCH v3 1/3] Documentation: dt-bindings: add async_irq to msm_hsusb Tim Bird
` (2 preceding siblings ...)
2015-11-20 23:22 ` [PATCH v3 1/3] Documentation: dt-bindings: add async_irq to msm_hsusb Tim Bird
@ 2015-11-20 23:22 ` Arnd Bergmann
2015-11-20 23:24 ` Tim Bird
3 siblings, 1 reply; 6+ messages in thread
From: Arnd Bergmann @ 2015-11-20 23:22 UTC (permalink / raw)
To: Tim Bird
Cc: Peter.Chen, robh+dt, pawel.moll, mark.rutland, gregkh, balbi,
Bjorn.Andersson, linux-usb, devicetree, linux-arm-msm,
linux-kernel, tbird20d
On Friday 20 November 2015 15:20:39 Tim Bird wrote:
> +- interrupt-names: Should contain the following:
> + "core" USB core interrupt
> + "async" Asynchronous interrupt to wake up from low power mode
> + (optional)
>
> - clocks: A list of phandle + clock-specifier pairs for the
> clocks listed in clock-names
> @@ -89,7 +94,8 @@ Example HSUSB OTG controller device node:
> usb@f9a55000 {
> compatible = "qcom,usb-otg-snps";
> reg = <0xf9a55000 0x400>;
> - interrupts = <0 134 0>;
> + interrupts = <0 134 0>, <0 140 0>;
> + interrupt-names = "core_irq", "async_irq";
> dr_mode = "peripheral";
>
>
Now the example doesn't match the documentation any more.
Arnd
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v3 1/3] Documentation: dt-bindings: add async_irq to msm_hsusb
2015-11-20 23:22 ` Arnd Bergmann
@ 2015-11-20 23:24 ` Tim Bird
0 siblings, 0 replies; 6+ messages in thread
From: Tim Bird @ 2015-11-20 23:24 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Peter.Chen@freescale.com, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, gregkh@linuxfoundation.org, balbi@ti.com,
Andersson, Björn, linux-usb@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, tbird20d@gmail.com
On 11/20/2015 03:22 PM, Arnd Bergmann wrote:
> On Friday 20 November 2015 15:20:39 Tim Bird wrote:
>> +- interrupt-names: Should contain the following:
>> + "core" USB core interrupt
>> + "async" Asynchronous interrupt to wake up from low power mode
>> + (optional)
>>
>> - clocks: A list of phandle + clock-specifier pairs for the
>> clocks listed in clock-names
>> @@ -89,7 +94,8 @@ Example HSUSB OTG controller device node:
>> usb@f9a55000 {
>> compatible = "qcom,usb-otg-snps";
>> reg = <0xf9a55000 0x400>;
>> - interrupts = <0 134 0>;
>> + interrupts = <0 134 0>, <0 140 0>;
>> + interrupt-names = "core_irq", "async_irq";
>> dr_mode = "peripheral";
>>
>>
>
> Now the example doesn't match the documentation any more.
Arrgh. I'm an idiot. V4 coming RSN.
-- Tim
^ permalink raw reply [flat|nested] 6+ messages in thread