devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Simon Arlott <simon-A6De1vDTPLDsq35pWSNszA@public.gmane.org>
To: Florian Fainelli
	<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>,
	"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
	Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
	Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
	Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>,
	Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>,
	Maxime Bizon <mbizon-MmRyKUhfbQ9GWvitb5QawA@public.gmane.org>,
	Linux Kernel Mailing List
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Jonas Gorski <jogo-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Subject: [PATCH (v3) 6/11] watchdog: bcm63xx_wdt: Obtain watchdog clock HZ from "periph" clk
Date: Wed, 25 Nov 2015 22:47:59 +0000	[thread overview]
Message-ID: <56563A9F.5000901@simon.arlott.org.uk> (raw)
In-Reply-To: <5654E7DE.4020400-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Instead of using a fixed clock HZ in the driver, obtain it from the
"periph" clk that the watchdog timer uses.

Signed-off-by: Simon Arlott <simon-A6De1vDTPLDsq35pWSNszA@public.gmane.org>
---
Patch 7 split into two patches.

On 24/11/15 22:42, Florian Fainelli wrote:
> On 24/11/15 14:12, Simon Arlott wrote:
>> Instead of using a fixed clock HZ in the driver, obtain it from the
>> "periph" clk that the watchdog timer uses.
>> 
>> Signed-off-by: Simon Arlott <simon-A6De1vDTPLDsq35pWSNszA@public.gmane.org>
> 
> Reviewed-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 

Changed because of the reordering of timer/watchdog register calls.

 drivers/watchdog/bcm63xx_wdt.c | 36 +++++++++++++++++++++++++++++++-----
 1 file changed, 31 insertions(+), 5 deletions(-)

diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c
index 2257924..0a19731 100644
--- a/drivers/watchdog/bcm63xx_wdt.c
+++ b/drivers/watchdog/bcm63xx_wdt.c
@@ -13,6 +13,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -32,12 +33,14 @@
 
 #define PFX KBUILD_MODNAME
 
-#define WDT_HZ			50000000		/* Fclk */
+#define WDT_CLK_NAME		"periph"
 
 struct bcm63xx_wdt_hw {
 	struct watchdog_device wdd;
 	raw_spinlock_t lock;
 	void __iomem *regs;
+	struct clk *clk;
+	unsigned long clock_hz;
 	bool running;
 };
 
@@ -54,7 +57,7 @@ static int bcm63xx_wdt_start(struct watchdog_device *wdd)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&hw->lock, flags);
-	bcm_writel(wdd->timeout * WDT_HZ, hw->regs + WDT_DEFVAL_REG);
+	bcm_writel(wdd->timeout * hw->clock_hz, hw->regs + WDT_DEFVAL_REG);
 	bcm_writel(WDT_START_1, hw->regs + WDT_CTL_REG);
 	bcm_writel(WDT_START_2, hw->regs + WDT_CTL_REG);
 	hw->running = true;
@@ -118,7 +121,7 @@ static void bcm63xx_wdt_isr(void *data)
 			die(PFX ": watchdog timer expired\n", get_irq_regs());
 		}
 
-		ms = timeleft / (WDT_HZ / 1000);
+		ms = timeleft / (hw->clock_hz / 1000);
 		dev_alert(hw->wdd.dev,
 			"warning timer fired, reboot in %ums\n", ms);
 	}
@@ -162,6 +165,25 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
+	hw->clk = devm_clk_get(&pdev->dev, WDT_CLK_NAME);
+	if (IS_ERR(hw->clk)) {
+		if (PTR_ERR(hw->clk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "unable to request clock\n");
+		return PTR_ERR(hw->clk);
+	}
+
+	hw->clock_hz = clk_get_rate(hw->clk);
+	if (!hw->clock_hz) {
+		dev_err(&pdev->dev, "unable to fetch clock rate\n");
+		return -EINVAL;
+	}
+
+	ret = clk_prepare_enable(hw->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable clock\n");
+		return ret;
+	}
+
 	raw_spin_lock_init(&hw->lock);
 	hw->running = false;
 
@@ -169,7 +191,7 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev)
 	wdd->ops = &bcm63xx_wdt_ops;
 	wdd->info = &bcm63xx_wdt_info;
 	wdd->min_timeout = 1;
-	wdd->max_timeout = 0xffffffff / WDT_HZ;
+	wdd->max_timeout = 0xffffffff / hw->clock_hz;
 	wdd->timeout = min(30U, wdd->max_timeout);
 
 	platform_set_drvdata(pdev, hw);
@@ -180,7 +202,7 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev)
 	ret = watchdog_register_device(wdd);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register watchdog device\n");
-		return ret;
+		goto disable_clk;
 	}
 
 	ret = bcm63xx_timer_register(TIMER_WDT_ID, bcm63xx_wdt_isr, hw);
@@ -198,6 +220,9 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev)
 
 unregister_watchdog:
 	watchdog_unregister_device(wdd);
+
+disable_clk:
+	clk_disable_unprepare(hw->clk);
 	return ret;
 }
 
@@ -207,6 +232,7 @@ static int bcm63xx_wdt_remove(struct platform_device *pdev)
 
 	bcm63xx_timer_unregister(TIMER_WDT_ID);
 	watchdog_unregister_device(&hw->wdd);
+	clk_disable_unprepare(hw->clk);
 	return 0;
 }
 
-- 
2.1.4

-- 
Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-11-25 22:47 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-21 19:02 [PATCH 1/4] clocksource: Add brcm,bcm6345-timer device tree binding Simon Arlott
2015-11-21 19:03 ` [PATCH 2/4] MIPS: bmips: Add bcm6345-l2-timer interrupt controller Simon Arlott
2015-11-21 19:04 ` [PATCH 3/4] watchdog: Add brcm,bcm6345-wdt device tree binding Simon Arlott
     [not found]   ` <5650C047.6040303-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-22 22:13     ` Rob Herring
     [not found] ` <5650BFD6.5030700-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-21 19:05   ` [PATCH 4/4] MIPS: bmips: Convert bcm63xx_wdt to use WATCHDOG_CORE Simon Arlott
2015-11-21 21:32     ` Guenter Roeck
     [not found]       ` <5650E2FA.6090408-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2015-11-21 21:44         ` Simon Arlott
2015-11-22  2:32           ` Guenter Roeck
2015-11-22 14:02             ` [PATCH 4/10] (Was: [PATCH 4/4]) " Simon Arlott
2015-11-22 14:05               ` [PATCH 4/10] watchdog: bcm63xx_wdt: Handle hardware interrupt and remove software timer Simon Arlott
     [not found]                 ` <5651CB9C.4090005-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-24 18:21                   ` Guenter Roeck
     [not found]                     ` <20151124182138.GB12289-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2015-11-25 20:14                       ` Jonas Gorski
     [not found]                         ` <CAOiHx=kn4NPxxYq0Te_T+8y_Cb1udyU0_EO-_eKp2Xshh7X6EA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-25 20:28                           ` Simon Arlott
2015-11-25 22:33                   ` [PATCH (v2) " Simon Arlott
     [not found]               ` <5651CB13.4090704-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-22 14:06                 ` [PATCH 5/10] watchdog: bcm63xx_wdt: Use WATCHDOG_CORE Simon Arlott
     [not found]                   ` <5651CBF0.30904-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25  2:44                     ` Guenter Roeck
2015-11-25 13:02                       ` Simon Arlott
     [not found]                         ` <726719450643bb69683224d731b582b0df27fe1f-dyyJQ+qCPjsfFgGGEbPnq5KvX+y0N6jJ2mWzQvkZbzCn6nfhxgf73RdaaeUjXGGo@public.gmane.org>
2015-11-25 14:10                           ` Guenter Roeck
     [not found]                             ` <5655C149.5010008-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2015-11-25 19:43                               ` Simon Arlott
     [not found]                       ` <56552099.7070709-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2015-11-25 22:40                         ` [PATCH (v3) 5/11] " Simon Arlott
2015-11-22 14:07                 ` [PATCH 6/10] watchdog: bcm63xx_wdt: Obtain watchdog clock HZ from "periph" clk Simon Arlott
     [not found]                   ` <5651CC3C.5090200-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-23 15:02                     ` Jonas Gorski
     [not found]                       ` <CAOiHx==Z=4H=-L2CY-FE5m6WMV0XzgsCmy1b9tUbsmOHydzkEw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-23 18:19                         ` Florian Fainelli
     [not found]                           ` <565358AF.2090609-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-23 19:00                             ` Simon Arlott
2015-11-24 22:12                   ` [PATCH (v2) " Simon Arlott
     [not found]                     ` <38e0094262a1f609b95697730137fb81dc83fcea-dyyJQ+qCPjsfFgGGEbPnq5KvX+y0N6jJ2mWzQvkZbzCn6nfhxgf73RdaaeUjXGGo@public.gmane.org>
2015-11-24 22:42                       ` Florian Fainelli
     [not found]                         ` <5654E7DE.4020400-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-25 22:47                           ` Simon Arlott [this message]
2015-11-22 14:09                 ` [PATCH 7/10] watchdog: bcm63xx_wdt: Add get_timeleft function Simon Arlott
     [not found]                   ` <5651CC90.7090402-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-24 22:15                     ` [PATCH (v2) " Simon Arlott
     [not found]                       ` <a1461a17c94353f38316d2c6ae04d6b77c91bfd4-dyyJQ+qCPjsfFgGGEbPnq5KvX+y0N6jJ2mWzQvkZbzCn6nfhxgf73RdaaeUjXGGo@public.gmane.org>
2015-11-24 22:43                         ` Florian Fainelli
2015-11-25  2:51                         ` Guenter Roeck
     [not found]                           ` <56552214.2050808-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2015-11-25  8:17                             ` Simon Arlott
     [not found]                               ` <56556E84.50202-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 22:50                                 ` [PATCH (v3) 7/11] " Simon Arlott
     [not found]                                   ` <56563B1E.6050906-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 22:54                                     ` [PATCH (v4) " Simon Arlott
     [not found]                                       ` <56563C2C.60308-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 22:57                                         ` [PATCH (v4) 8/11] watchdog: bcm63xx_wdt: Warn if the watchdog is currently running Simon Arlott
2015-11-22 14:11                 ` [PATCH 8/10] watchdog: bcm63xx_wdt: Remove dependency on mach-bcm63xx functions/defines Simon Arlott
2015-11-22 14:12                 ` [PATCH 9/10] watchdog: bcm63xx_wdt: Use bcm63xx_timer interrupt directly Simon Arlott
     [not found]                   ` <5651CD67.6090507-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 23:03                     ` [PATCH (v2) 10/11] " Simon Arlott
2015-11-22 14:14                 ` [PATCH 10/10] watchdog: bcm63xx_wdt: Use brcm,bcm6345-wdt device tree binding Simon Arlott
     [not found]                   ` <5651CDB6.5030406-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 23:09                     ` [PATCH (v2) 11/11] " Simon Arlott
2015-11-22 22:12 ` [PATCH 1/4] clocksource: Add brcm,bcm6345-timer " Rob Herring
2015-11-23 15:33 ` Jonas Gorski
     [not found]   ` <CAOiHx=k0Aa+qrBT1J7_cQaQRxndBmwsgSgi3x0eJOYTAy6Zq7Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-23 18:55     ` [PATCH (v2) 1/10] " Simon Arlott
     [not found]       ` <5653612A.4050309-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-23 18:57         ` [PATCH (v2) 2/10] MIPS: bmips: Add bcm6345-l2-timer interrupt controller Simon Arlott
     [not found]           ` <565361AF.20400-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-24 22:10             ` [PATCH (v3) " Simon Arlott
     [not found]               ` <70d031ae4c3aa29888d77b64686c39e7e7eaae92-dyyJQ+qCPjsfFgGGEbPnq5KvX+y0N6jJ2mWzQvkZbzCn6nfhxgf73RdaaeUjXGGo@public.gmane.org>
2015-11-24 22:36                 ` Florian Fainelli
2015-11-26 22:32                   ` [PATCH (v4) 2/11] " Simon Arlott
     [not found]                     ` <5657886F.3090908-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-27  8:37                       ` Thomas Gleixner
2015-11-28 12:26                         ` [PATCH (v5) 3/11] " Simon Arlott
     [not found]                           ` <56599D73.7040801-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-12-01  0:22                             ` Guenter Roeck
2016-05-09 12:01                               ` Álvaro Fernández Rojas
     [not found]                                 ` <256BE4660FB03085.33070B6A-E0AC-4643-92B8-4FD874210CD9-jAs8HypviEooOQlpcoRfSA@public.gmane.org>
2016-05-09 13:06                                   ` Guenter Roeck
2016-05-11  6:40                                     ` [PATCH 2/4] " Álvaro Fernández Rojas
2015-11-25  3:05       ` [PATCH (v2) 1/10] clocksource: Add brcm,bcm6345-timer device tree binding Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56563A9F.5000901@simon.arlott.org.uk \
    --to=simon-a6de1vdtpldsq35pwsnsza@public.gmane.org \
    --cc=cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
    --cc=jogo-p3rKhJxN3npAfugRpC6u6w@public.gmane.org \
    --cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
    --cc=linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=marc.zyngier-5wv7dgnIgG8@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mbizon-MmRyKUhfbQ9GWvitb5QawA@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
    --cc=wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).