From: Simon Arlott <simon-A6De1vDTPLDsq35pWSNszA@public.gmane.org>
To: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>,
Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>,
Maxime Bizon <mbizon-MmRyKUhfbQ9GWvitb5QawA@public.gmane.org>,
Linux Kernel Mailing List
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org,
linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Jonas Gorski <jogo-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Subject: [PATCH (v2) 10/11] watchdog: bcm63xx_wdt: Use bcm63xx_timer interrupt directly
Date: Wed, 25 Nov 2015 23:03:49 +0000 [thread overview]
Message-ID: <56563E55.3060109@simon.arlott.org.uk> (raw)
In-Reply-To: <5651CD67.6090507-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
There is only one user of bcm63xx_timer and that is the watchdog.
To allow the watchdog driver to be used on machine types other than
mach-bcm63xx, it needs to use an interrupt instead of a custom register
function.
Modify bcm63xx_timer to only disable the timers (so that they don't
interfere with the watchdog if an interrupt occurs) and remove its
exported functions.
Use the timer interrupt directly in bcm63xx_wdt.
Signed-off-by: Simon Arlott <simon-A6De1vDTPLDsq35pWSNszA@public.gmane.org>
---
Patch 7 split into two patches.
There was no change to patch 8/10 which is now 9/11.
On 25/11/15 22:40, Simon Arlott wrote:
> Moved registration of the timer in the probe function to after register
> of the watchdog device because the interrupt handler uses wdd->dev.
This patch (9/10 now 10/11) was affected by this reordering, and an
earlier change to use "hw" instead of "wdd" as the interrupt data.
arch/mips/bcm63xx/dev-wdt.c | 7 +
arch/mips/bcm63xx/timer.c | 181 +--------------------
arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h | 11 --
drivers/watchdog/bcm63xx_wdt.c | 41 +++--
4 files changed, 36 insertions(+), 204 deletions(-)
delete mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
diff --git a/arch/mips/bcm63xx/dev-wdt.c b/arch/mips/bcm63xx/dev-wdt.c
index 2a2346a..a7a5497 100644
--- a/arch/mips/bcm63xx/dev-wdt.c
+++ b/arch/mips/bcm63xx/dev-wdt.c
@@ -17,6 +17,11 @@ static struct resource wdt_resources[] = {
.end = -1, /* filled at runtime */
.flags = IORESOURCE_MEM,
},
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device bcm63xx_wdt_device = {
@@ -32,6 +37,8 @@ int __init bcm63xx_wdt_register(void)
wdt_resources[0].end = wdt_resources[0].start;
wdt_resources[0].end += RSET_WDT_SIZE - 1;
+ wdt_resources[1].start = bcm63xx_get_irq_number(IRQ_TIMER);
+
return platform_device_register(&bcm63xx_wdt_device);
}
arch_initcall(bcm63xx_wdt_register);
diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c
index 2110359..9c7b41a6 100644
--- a/arch/mips/bcm63xx/timer.c
+++ b/arch/mips/bcm63xx/timer.c
@@ -9,196 +9,23 @@
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
#include <bcm63xx_cpu.h>
#include <bcm63xx_io.h>
-#include <bcm63xx_timer.h>
#include <bcm63xx_regs.h>
-static DEFINE_RAW_SPINLOCK(timer_reg_lock);
-static DEFINE_RAW_SPINLOCK(timer_data_lock);
-static struct clk *periph_clk;
-
-static struct timer_data {
- void (*cb)(void *);
- void *data;
-} timer_data[BCM63XX_TIMER_COUNT];
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- u32 stat;
- int i;
-
- raw_spin_lock(&timer_reg_lock);
- stat = bcm_timer_readl(TIMER_IRQSTAT_REG);
- bcm_timer_writel(stat, TIMER_IRQSTAT_REG);
- raw_spin_unlock(&timer_reg_lock);
-
- for (i = 0; i < BCM63XX_TIMER_COUNT; i++) {
- if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i)))
- continue;
-
- raw_spin_lock(&timer_data_lock);
- if (!timer_data[i].cb) {
- raw_spin_unlock(&timer_data_lock);
- continue;
- }
-
- timer_data[i].cb(timer_data[i].data);
- raw_spin_unlock(&timer_data_lock);
- }
-
- return IRQ_HANDLED;
-}
-
-int bcm63xx_timer_enable(int id)
-{
- u32 reg;
- unsigned long flags;
-
- if (id >= BCM63XX_TIMER_COUNT)
- return -EINVAL;
-
- raw_spin_lock_irqsave(&timer_reg_lock, flags);
-
- reg = bcm_timer_readl(TIMER_CTLx_REG(id));
- reg |= TIMER_CTL_ENABLE_MASK;
- bcm_timer_writel(reg, TIMER_CTLx_REG(id));
-
- reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
- reg |= TIMER_IRQSTAT_TIMER_IR_EN(id);
- bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
-
- raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
- return 0;
-}
-
-EXPORT_SYMBOL(bcm63xx_timer_enable);
-
-int bcm63xx_timer_disable(int id)
+static int bcm63xx_timer_init(void)
{
u32 reg;
- unsigned long flags;
-
- if (id >= BCM63XX_TIMER_COUNT)
- return -EINVAL;
-
- raw_spin_lock_irqsave(&timer_reg_lock, flags);
-
- reg = bcm_timer_readl(TIMER_CTLx_REG(id));
- reg &= ~TIMER_CTL_ENABLE_MASK;
- bcm_timer_writel(reg, TIMER_CTLx_REG(id));
-
- reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
- reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id);
- bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
-
- raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
- return 0;
-}
-
-EXPORT_SYMBOL(bcm63xx_timer_disable);
-
-int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data)
-{
- unsigned long flags;
- int ret;
-
- if (id >= BCM63XX_TIMER_COUNT || !callback)
- return -EINVAL;
-
- ret = 0;
- raw_spin_lock_irqsave(&timer_data_lock, flags);
- if (timer_data[id].cb) {
- ret = -EBUSY;
- goto out;
- }
-
- timer_data[id].cb = callback;
- timer_data[id].data = data;
-
-out:
- raw_spin_unlock_irqrestore(&timer_data_lock, flags);
- return ret;
-}
-
-EXPORT_SYMBOL(bcm63xx_timer_register);
-
-void bcm63xx_timer_unregister(int id)
-{
- unsigned long flags;
-
- if (id >= BCM63XX_TIMER_COUNT)
- return;
-
- raw_spin_lock_irqsave(&timer_data_lock, flags);
- timer_data[id].cb = NULL;
- raw_spin_unlock_irqrestore(&timer_data_lock, flags);
-}
-
-EXPORT_SYMBOL(bcm63xx_timer_unregister);
-
-unsigned int bcm63xx_timer_countdown(unsigned int countdown_us)
-{
- return (clk_get_rate(periph_clk) / (1000 * 1000)) * countdown_us;
-}
-
-EXPORT_SYMBOL(bcm63xx_timer_countdown);
-
-int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
-{
- u32 reg, countdown;
- unsigned long flags;
-
- if (id >= BCM63XX_TIMER_COUNT)
- return -EINVAL;
-
- countdown = bcm63xx_timer_countdown(countdown_us);
- if (countdown & ~TIMER_CTL_COUNTDOWN_MASK)
- return -EINVAL;
-
- raw_spin_lock_irqsave(&timer_reg_lock, flags);
- reg = bcm_timer_readl(TIMER_CTLx_REG(id));
-
- if (monotonic)
- reg &= ~TIMER_CTL_MONOTONIC_MASK;
- else
- reg |= TIMER_CTL_MONOTONIC_MASK;
-
- reg &= ~TIMER_CTL_COUNTDOWN_MASK;
- reg |= countdown;
- bcm_timer_writel(reg, TIMER_CTLx_REG(id));
-
- raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
- return 0;
-}
-
-EXPORT_SYMBOL(bcm63xx_timer_set);
-
-int bcm63xx_timer_init(void)
-{
- int ret, irq;
- u32 reg;
+ /* Disable all timers so that they won't interfere with use of the
+ * timer interrupt by the watchdog.
+ */
reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
reg &= ~TIMER_IRQSTAT_TIMER0_IR_EN;
reg &= ~TIMER_IRQSTAT_TIMER1_IR_EN;
reg &= ~TIMER_IRQSTAT_TIMER2_IR_EN;
bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
- periph_clk = clk_get(NULL, "periph");
- if (IS_ERR(periph_clk))
- return -ENODEV;
-
- irq = bcm63xx_get_irq_number(IRQ_TIMER);
- ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL);
- if (ret) {
- pr_err("%s: failed to register irq\n", __func__);
- return ret;
- }
-
return 0;
}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
deleted file mode 100644
index c0fce83..0000000
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef BCM63XX_TIMER_H_
-#define BCM63XX_TIMER_H_
-
-int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data);
-void bcm63xx_timer_unregister(int id);
-int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us);
-int bcm63xx_timer_enable(int id);
-int bcm63xx_timer_disable(int id);
-unsigned int bcm63xx_timer_countdown(unsigned int countdown_us);
-
-#endif /* !BCM63XX_TIMER_H_ */
diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c
index f409523..fa6c28b 100644
--- a/drivers/watchdog/bcm63xx_wdt.c
+++ b/drivers/watchdog/bcm63xx_wdt.c
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/errno.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -28,9 +29,6 @@
#include <linux/resource.h>
#include <linux/platform_device.h>
-#include <bcm63xx_regs.h>
-#include <bcm63xx_timer.h>
-
#define PFX KBUILD_MODNAME
#define WDT_CLK_NAME "periph"
@@ -41,6 +39,7 @@ struct bcm63xx_wdt_hw {
void __iomem *regs;
struct clk *clk;
unsigned long clock_hz;
+ int irq;
bool running;
};
@@ -99,7 +98,7 @@ static int bcm63xx_wdt_set_timeout(struct watchdog_device *wdd,
}
/* The watchdog interrupt occurs when half the timeout is remaining */
-static void bcm63xx_wdt_isr(void *data)
+static irqreturn_t bcm63xx_wdt_interrupt(int irq, void *data)
{
struct bcm63xx_wdt_hw *hw = data;
unsigned long flags;
@@ -139,6 +138,7 @@ static void bcm63xx_wdt_isr(void *data)
"warning timer fired, reboot in %ums\n", ms);
}
raw_spin_unlock_irqrestore(&hw->lock, flags);
+ return IRQ_HANDLED;
}
static struct watchdog_ops bcm63xx_wdt_ops = {
@@ -237,24 +237,31 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev)
goto disable_clk;
}
- ret = bcm63xx_timer_register(TIMER_WDT_ID, bcm63xx_wdt_isr, hw);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to register wdt timer isr\n");
- goto unregister_watchdog;
+ hw->irq = platform_get_irq(pdev, 0);
+ if (hw->irq >= 0) {
+ ret = devm_request_irq(&pdev->dev, hw->irq,
+ bcm63xx_wdt_interrupt, IRQF_TIMER,
+ dev_name(&pdev->dev), hw);
+ if (ret)
+ hw->irq = -1;
}
- dev_info(&pdev->dev,
- "%s at MMIO 0x%p (timeout = %us, max_timeout = %us)",
- dev_name(wdd->dev), hw->regs,
- wdd->timeout, wdd->max_timeout);
+ if (hw->irq >= 0) {
+ dev_info(&pdev->dev,
+ "%s at MMIO 0x%p (irq = %d, timeout = %us, max_timeout = %us)",
+ dev_name(wdd->dev), hw->regs, hw->irq,
+ wdd->timeout, wdd->max_timeout);
+ } else {
+ dev_info(&pdev->dev,
+ "%s at MMIO 0x%p (timeout = %us, max_timeout = %us)",
+ dev_name(wdd->dev), hw->regs,
+ wdd->timeout, wdd->max_timeout);
+ }
if (hw->running)
dev_alert(wdd->dev, "running, reboot in %us\n", timeleft);
return 0;
-unregister_watchdog:
- watchdog_unregister_device(wdd);
-
disable_clk:
clk_disable_unprepare(hw->clk);
return ret;
@@ -264,7 +271,9 @@ static int bcm63xx_wdt_remove(struct platform_device *pdev)
{
struct bcm63xx_wdt_hw *hw = platform_get_drvdata(pdev);
- bcm63xx_timer_unregister(TIMER_WDT_ID);
+ if (hw->irq >= 0)
+ devm_free_irq(&pdev->dev, hw->irq, hw);
+
watchdog_unregister_device(&hw->wdd);
clk_disable_unprepare(hw->clk);
return 0;
--
2.1.4
--
Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-11-25 23:03 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-21 19:02 [PATCH 1/4] clocksource: Add brcm,bcm6345-timer device tree binding Simon Arlott
2015-11-21 19:03 ` [PATCH 2/4] MIPS: bmips: Add bcm6345-l2-timer interrupt controller Simon Arlott
2015-11-21 19:04 ` [PATCH 3/4] watchdog: Add brcm,bcm6345-wdt device tree binding Simon Arlott
[not found] ` <5650C047.6040303-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-22 22:13 ` Rob Herring
[not found] ` <5650BFD6.5030700-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-21 19:05 ` [PATCH 4/4] MIPS: bmips: Convert bcm63xx_wdt to use WATCHDOG_CORE Simon Arlott
2015-11-21 21:32 ` Guenter Roeck
[not found] ` <5650E2FA.6090408-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2015-11-21 21:44 ` Simon Arlott
2015-11-22 2:32 ` Guenter Roeck
2015-11-22 14:02 ` [PATCH 4/10] (Was: [PATCH 4/4]) " Simon Arlott
2015-11-22 14:05 ` [PATCH 4/10] watchdog: bcm63xx_wdt: Handle hardware interrupt and remove software timer Simon Arlott
[not found] ` <5651CB9C.4090005-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-24 18:21 ` Guenter Roeck
[not found] ` <20151124182138.GB12289-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2015-11-25 20:14 ` Jonas Gorski
[not found] ` <CAOiHx=kn4NPxxYq0Te_T+8y_Cb1udyU0_EO-_eKp2Xshh7X6EA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-25 20:28 ` Simon Arlott
2015-11-25 22:33 ` [PATCH (v2) " Simon Arlott
[not found] ` <5651CB13.4090704-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-22 14:06 ` [PATCH 5/10] watchdog: bcm63xx_wdt: Use WATCHDOG_CORE Simon Arlott
[not found] ` <5651CBF0.30904-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 2:44 ` Guenter Roeck
2015-11-25 13:02 ` Simon Arlott
[not found] ` <726719450643bb69683224d731b582b0df27fe1f-dyyJQ+qCPjsfFgGGEbPnq5KvX+y0N6jJ2mWzQvkZbzCn6nfhxgf73RdaaeUjXGGo@public.gmane.org>
2015-11-25 14:10 ` Guenter Roeck
[not found] ` <5655C149.5010008-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2015-11-25 19:43 ` Simon Arlott
[not found] ` <56552099.7070709-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2015-11-25 22:40 ` [PATCH (v3) 5/11] " Simon Arlott
2015-11-22 14:07 ` [PATCH 6/10] watchdog: bcm63xx_wdt: Obtain watchdog clock HZ from "periph" clk Simon Arlott
[not found] ` <5651CC3C.5090200-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-23 15:02 ` Jonas Gorski
[not found] ` <CAOiHx==Z=4H=-L2CY-FE5m6WMV0XzgsCmy1b9tUbsmOHydzkEw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-23 18:19 ` Florian Fainelli
[not found] ` <565358AF.2090609-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-23 19:00 ` Simon Arlott
2015-11-24 22:12 ` [PATCH (v2) " Simon Arlott
[not found] ` <38e0094262a1f609b95697730137fb81dc83fcea-dyyJQ+qCPjsfFgGGEbPnq5KvX+y0N6jJ2mWzQvkZbzCn6nfhxgf73RdaaeUjXGGo@public.gmane.org>
2015-11-24 22:42 ` Florian Fainelli
[not found] ` <5654E7DE.4020400-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-25 22:47 ` [PATCH (v3) 6/11] " Simon Arlott
2015-11-22 14:09 ` [PATCH 7/10] watchdog: bcm63xx_wdt: Add get_timeleft function Simon Arlott
[not found] ` <5651CC90.7090402-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-24 22:15 ` [PATCH (v2) " Simon Arlott
[not found] ` <a1461a17c94353f38316d2c6ae04d6b77c91bfd4-dyyJQ+qCPjsfFgGGEbPnq5KvX+y0N6jJ2mWzQvkZbzCn6nfhxgf73RdaaeUjXGGo@public.gmane.org>
2015-11-24 22:43 ` Florian Fainelli
2015-11-25 2:51 ` Guenter Roeck
[not found] ` <56552214.2050808-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2015-11-25 8:17 ` Simon Arlott
[not found] ` <56556E84.50202-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 22:50 ` [PATCH (v3) 7/11] " Simon Arlott
[not found] ` <56563B1E.6050906-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 22:54 ` [PATCH (v4) " Simon Arlott
[not found] ` <56563C2C.60308-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 22:57 ` [PATCH (v4) 8/11] watchdog: bcm63xx_wdt: Warn if the watchdog is currently running Simon Arlott
2015-11-22 14:11 ` [PATCH 8/10] watchdog: bcm63xx_wdt: Remove dependency on mach-bcm63xx functions/defines Simon Arlott
2015-11-22 14:12 ` [PATCH 9/10] watchdog: bcm63xx_wdt: Use bcm63xx_timer interrupt directly Simon Arlott
[not found] ` <5651CD67.6090507-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 23:03 ` Simon Arlott [this message]
2015-11-22 14:14 ` [PATCH 10/10] watchdog: bcm63xx_wdt: Use brcm,bcm6345-wdt device tree binding Simon Arlott
[not found] ` <5651CDB6.5030406-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-25 23:09 ` [PATCH (v2) 11/11] " Simon Arlott
2015-11-22 22:12 ` [PATCH 1/4] clocksource: Add brcm,bcm6345-timer " Rob Herring
2015-11-23 15:33 ` Jonas Gorski
[not found] ` <CAOiHx=k0Aa+qrBT1J7_cQaQRxndBmwsgSgi3x0eJOYTAy6Zq7Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-23 18:55 ` [PATCH (v2) 1/10] " Simon Arlott
[not found] ` <5653612A.4050309-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-23 18:57 ` [PATCH (v2) 2/10] MIPS: bmips: Add bcm6345-l2-timer interrupt controller Simon Arlott
[not found] ` <565361AF.20400-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-24 22:10 ` [PATCH (v3) " Simon Arlott
[not found] ` <70d031ae4c3aa29888d77b64686c39e7e7eaae92-dyyJQ+qCPjsfFgGGEbPnq5KvX+y0N6jJ2mWzQvkZbzCn6nfhxgf73RdaaeUjXGGo@public.gmane.org>
2015-11-24 22:36 ` Florian Fainelli
2015-11-26 22:32 ` [PATCH (v4) 2/11] " Simon Arlott
[not found] ` <5657886F.3090908-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-11-27 8:37 ` Thomas Gleixner
2015-11-28 12:26 ` [PATCH (v5) 3/11] " Simon Arlott
[not found] ` <56599D73.7040801-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-12-01 0:22 ` Guenter Roeck
2016-05-09 12:01 ` Álvaro Fernández Rojas
[not found] ` <256BE4660FB03085.33070B6A-E0AC-4643-92B8-4FD874210CD9-jAs8HypviEooOQlpcoRfSA@public.gmane.org>
2016-05-09 13:06 ` Guenter Roeck
2016-05-11 6:40 ` [PATCH 2/4] " Álvaro Fernández Rojas
2015-11-25 3:05 ` [PATCH (v2) 1/10] clocksource: Add brcm,bcm6345-timer device tree binding Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56563E55.3060109@simon.arlott.org.uk \
--to=simon-a6de1vdtpldsq35pwsnsza@public.gmane.org \
--cc=cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
--cc=jogo-p3rKhJxN3npAfugRpC6u6w@public.gmane.org \
--cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=marc.zyngier-5wv7dgnIgG8@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mbizon-MmRyKUhfbQ9GWvitb5QawA@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
--cc=wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).