From: Jonathan Cameron <jic23@kernel.org>
To: Adriana Reus <adriana.reus@intel.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
robh+dt@kernel.org, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, pawel.moll@arm.com, pmeerw@pmeerw.net,
lars@metafoo.de
Subject: Re: [PATCH 3/5] iio: light: us5182d: Add functions for selectively enabling als and proximity
Date: Sun, 29 Nov 2015 16:13:15 +0000 [thread overview]
Message-ID: <565B241B.3000100@kernel.org> (raw)
In-Reply-To: <1448362792-5181-4-git-send-email-adriana.reus@intel.com>
On 24/11/15 10:59, Adriana Reus wrote:
> Keep track of the als and px enabled/disabled status in
> order to enable them selectively.
>
> Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Couple more nitpicks, but again fixed up during apply.
> ---
> drivers/iio/light/us5182d.c | 64 ++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 60 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/light/us5182d.c b/drivers/iio/light/us5182d.c
> index 7993014..3d959f3 100644
> --- a/drivers/iio/light/us5182d.c
> +++ b/drivers/iio/light/us5182d.c
> @@ -119,6 +119,9 @@ struct us5182d_data {
> u8 opmode;
> u8 power_mode;
>
> + bool als_enabled;
> + bool px_enabled;
> +
> bool default_continuous;
> };
>
> @@ -227,6 +230,48 @@ static int us5182d_set_opmode(struct us5182d_data *data, u8 mode)
> return 0;
> }
>
> +static int us5182d_als_enable(struct us5182d_data *data)
> +{
> + int ret;
> + u8 mode;
> +
> + if (data->power_mode == US5182D_ONESHOT)
> + return us5182d_set_opmode(data, US5182D_ALS_ONLY);
> +
> + if (data->als_enabled)
> + return 0;
> +
> + mode = data->px_enabled ? US5182D_ALS_PX : US5182D_ALS_ONLY;
> +
> + ret = us5182d_set_opmode(data, mode);
> + if (ret < 0)
> + return ret;
> +
> + data->als_enabled = true;
Blank line here ideally.
> + return 0;
> +}
> +
> +static int us5182d_px_enable(struct us5182d_data *data)
> +{
> + int ret;
> + u8 mode;
> +
> + if (data->power_mode == US5182D_ONESHOT)
> + return us5182d_set_opmode(data, US5182D_PX_ONLY);
> +
> + if (data->px_enabled)
> + return 0;
> +
> + mode = data->als_enabled ? US5182D_ALS_PX : US5182D_PX_ONLY;
> +
> + ret = us5182d_set_opmode(data, mode);
> + if (ret < 0)
> + return ret;
> +
> + data->px_enabled = true;
And here...
> + return 0;
> +}
> +
> static int us5182d_shutdown_en (struct us5182d_data *data, u8 state)
> {
> int ret;
> @@ -241,7 +286,16 @@ static int us5182d_shutdown_en (struct us5182d_data *data, u8 state)
> ret = ret & ~US5182D_CFG0_SHUTDOWN_EN;
> ret = ret | state;
>
> - return i2c_smbus_write_byte_data(data->client, US5182D_REG_CFG0, ret);
> + ret = i2c_smbus_write_byte_data(data->client, US5182D_REG_CFG0, ret);
> + if (ret < 0)
> + return ret;
> +
> + if (state & US5182D_CFG0_SHUTDOWN_EN) {
> + data->als_enabled = false;
> + data->px_enabled = false;
> + }
> +
> + return ret;
> }
>
> static int us5182d_read_raw(struct iio_dev *indio_dev,
> @@ -261,7 +315,7 @@ static int us5182d_read_raw(struct iio_dev *indio_dev,
> if (ret < 0)
> goto out_err;
> }
> - ret = us5182d_set_opmode(data, US5182D_OPMODE_ALS);
> + ret = us5182d_als_enable(data);
> if (ret < 0)
> goto out_err;
>
> @@ -278,7 +332,7 @@ static int us5182d_read_raw(struct iio_dev *indio_dev,
> if (ret < 0)
> goto out_err;
> }
> - ret = us5182d_set_opmode(data, US5182D_OPMODE_PX);
> + ret = us5182d_px_enable(data);
> if (ret < 0)
> goto out_err;
>
> @@ -421,6 +475,9 @@ static int us5182d_init(struct iio_dev *indio_dev)
> return ret;
> }
>
> + data->als_enabled = true;
> + data->px_enabled = true;
> +
> if (!data->default_continuous) {
> ret = us5182d_shutdown_en(data, US5182D_CFG0_SHUTDOWN_EN);
> if (ret < 0)
> @@ -428,7 +485,6 @@ static int us5182d_init(struct iio_dev *indio_dev)
> data->power_mode = US5182D_ONESHOT;
> }
>
> -
> return ret;
> }
>
>
next prev parent reply other threads:[~2015-11-29 16:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-24 10:59 [PATCH 0/5] iio: light: us5281d: Add power managmenet and interrupt support Adriana Reus
2015-11-24 10:59 ` [PATCH 1/5] iio: light: us5182d: Add property for choosing default power mode Adriana Reus
2015-11-29 14:35 ` Jonathan Cameron
2015-11-24 10:59 ` [PATCH 2/5] Documentation: devicetree: Add property for controlling power saving mode for the us5182 als sensor Adriana Reus
[not found] ` <1448362792-5181-3-git-send-email-adriana.reus-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-11-25 0:01 ` Rob Herring
2015-11-25 9:50 ` Adriana Reus
[not found] ` <56558466.9000001-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-11-25 23:55 ` Rob Herring
2015-11-29 14:36 ` Jonathan Cameron
[not found] ` <1448362792-5181-1-git-send-email-adriana.reus-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-11-24 10:59 ` [PATCH 3/5] iio: light: us5182d: Add functions for selectively enabling als and proximity Adriana Reus
2015-11-29 16:13 ` Jonathan Cameron [this message]
2015-11-24 10:59 ` [PATCH 4/5] iio: light: us8152d: Add power management support Adriana Reus
2015-11-29 14:59 ` Jonathan Cameron
2015-11-24 10:59 ` [PATCH 5/5] iio: light: us5182d: Add interrupt support and events Adriana Reus
2015-11-29 14:59 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=565B241B.3000100@kernel.org \
--to=jic23@kernel.org \
--cc=adriana.reus@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pawel.moll@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).