Re: [PATCH v2 01/18] ARM: am57xx: cl-som-am57x: dts: add basic module support

[Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>]

On 12/01/2015 10:43 AM, Tony Lindgren wrote:
> * Dmitry Lifshitz <lifshitz-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> [151201 08:26]:
>>
>> It might looks the same set of regulators for multiple boards,
>> but it is not. Each board may apply its own regulators usage scheme, and
>> this is our case (as compared to am57xx-beagle-x15.dts).
>>
>> For the best of my knowledge, it used to be in a common *.dtsi file (at
>> least in early OMAP5 DT support in TI kernel tree), but then I found that
>> PMIC registration had been moved to the boards DT files.
> 
> Have you actually looked at how much of the implementation is same across
> the omap5 boards? My guess is that a whole lot is same.. See for example
> omap5-board-common.dtsi.

Unfortunately with DRA7 / AM57xx:
at least 2 different PMICs -> DRA74/DRA72 evms.
even across similar PMIC usage, different voltage rail usage accross
evms: DRA74evm, x15/GPEVM, AM571x-IDK/AM572x-IDK -> they are not
necessarily compatible.

Example: some of them have Ganged voltage rail, others dont - few others
are mixed. if you are trying to get common regulator usage -> it is
kinda pretty hard given the freedom board designers are being given by
TI.. OMAP5 was more controlled in terms of what specific configuration
the board designers had to follow. that is no longer the case for
DRA7/AM57 platforms. just my 2 cents here.

-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html