From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Andrew F. Davis" <afd-l0cyMroinI0@public.gmane.org>
Subject: Re: [PATCH v2 1/2] Documentation: afe4404: Add DT bindings for the
 AFE4404 heart monitor
Date: Sat, 5 Dec 2015 11:53:29 -0600
Message-ID: <56632499.9080708@ti.com>
References: <1449086240-13375-1-git-send-email-afd@ti.com>
 <1449086240-13375-2-git-send-email-afd@ti.com> <56632122.8040702@kernel.org>
Mime-Version: 1.0
Content-Type: text/plain; charset="windows-1252"; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-api-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
In-Reply-To: <56632122.8040702-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Sender: linux-api-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
To: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>, Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>, Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>, Hartmut Knaack <knaack.h-Mmb7MZpHnFY@public.gmane.org>, Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>, Peter Meerwald <pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
List-Id: devicetree@vger.kernel.org

On 12/05/2015 11:38 AM, Jonathan Cameron wrote:
> On 02/12/15 19:57, Andrew F. Davis wrote:
>> Add the TI afe4404 heart monitor DT bindings documentation.
>> Create health directory created under iio.
>>
>> Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>
> One little point inline - otherwise this is straightforward and
> looks good to me.
>
> Could add cross references to the interrupt and gpio docs.
>

Will add.

> Jonathan
>> ---
>>   .../devicetree/bindings/iio/health/afe4404.txt     | 27 ++++++++++++++++++++++
>>   1 file changed, 27 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
>> new file mode 100644
>> index 0000000..25b77a4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
>> @@ -0,0 +1,27 @@
>> +* Texas Instruments AFE4404 Heart rate and Pulse Oximeter
>> +
>> +Required properties:
>> + - compatible		: Should be "ti,afe4404".
>> + - reg			: I2C address of the device.
>> + - tx_sup-supply	: Regulator supply to LEDs.
> If the sup bit is for supply I'd drop it and just have
> tx-supply.

It is, the name of the pin in the datasheet is "tx_sup", so
I went with that.

>> + - interrupt-parent	: Phandle to he parent interrupt controller.
>> + - interrupts		: The interrupt line the device ADC_RDY pin is connected to.
>> +
>> +Optional properties:
>> + - reset-gpios		: GPIO used to reset the device.
>> +
>> +Example:
>> +
>> +&i2c2 {
>> +	heart_mon@58 {
>> +		compatible = "ti,afe4404";
>> +		reg = <0x58>;
>> +
>> +		tx_sup-supply = <&vbat>;
>> +
>> +		interrupt-parent = <&gpio1>;
>> +		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
>> +
>> +		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
>> +	};
>> +};
>>
>