devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Simon Arlott <simon-A6De1vDTPLDsq35pWSNszA@public.gmane.org>,
	"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Brian Norris
	<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Linux Kernel Mailing List
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
	linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
	Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Jonas Gorski <jogo-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Subject: Re: [PATCH linux-next (v2) 3/3] mtd: brcmnand: Add support for the BCM6368
Date: Wed, 9 Dec 2015 13:04:54 -0800	[thread overview]
Message-ID: <56689776.20107@gmail.com> (raw)
In-Reply-To: <5668928A.50601-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>

Le 09/12/2015 12:43, Simon Arlott a écrit :
> The BCM6368 has a NAND interrupt register with combined status and enable
> registers.
> 
> As the BCM6328, BCM6362 and BCM6368 all use v2.1 controllers, the first
> variant that will work with this driver is the BCM63268 using a v4.0
> controller.
> 
> Set up the device by disabling and acking all interrupts, then handle
> the CTRL_READY interrupt.
> 
> Signed-off-by: Simon Arlott <simon-A6De1vDTPLDsq35pWSNszA@public.gmane.org>

Reviewed-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

> ---
> Changed "nand-intr-base" reg name to "nand-int-base".
> 
>  drivers/mtd/nand/brcmnand/Makefile       |   1 +
>  drivers/mtd/nand/brcmnand/bcm6368_nand.c | 145 +++++++++++++++++++++++++++++++
>  2 files changed, 146 insertions(+)
>  create mode 100644 drivers/mtd/nand/brcmnand/bcm6368_nand.c
> 
> diff --git a/drivers/mtd/nand/brcmnand/Makefile b/drivers/mtd/nand/brcmnand/Makefile
> index 3b1fbfd..b28ffb59 100644
> --- a/drivers/mtd/nand/brcmnand/Makefile
> +++ b/drivers/mtd/nand/brcmnand/Makefile
> @@ -2,5 +2,6 @@
>  # more specific iproc_nand.o, for instance
>  obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= iproc_nand.o
>  obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm63138_nand.o
> +obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm6368_nand.o
>  obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmstb_nand.o
>  obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand.o
> diff --git a/drivers/mtd/nand/brcmnand/bcm6368_nand.c b/drivers/mtd/nand/brcmnand/bcm6368_nand.c
> new file mode 100644
> index 0000000..7f5359b
> --- /dev/null
> +++ b/drivers/mtd/nand/brcmnand/bcm6368_nand.c
> @@ -0,0 +1,145 @@
> +/*
> + * Copyright 2015 Simon Arlott
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Derived from bcm63138_nand.c:
> + * Copyright © 2015 Broadcom Corporation
> + *
> + * Derived from bcm963xx_4.12L.06B_consumer/shared/opensource/include/bcm963xx/63268_map_part.h:
> + * Copyright 2000-2010 Broadcom Corporation
> + *
> + * Derived from bcm963xx_4.12L.06B_consumer/shared/opensource/flash/nandflash.c:
> + * Copyright 2000-2010 Broadcom Corporation
> + */
> +
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include "brcmnand.h"
> +
> +struct bcm6368_nand_soc {
> +	struct brcmnand_soc soc;
> +	void __iomem *base;
> +};
> +
> +#define BCM6368_NAND_INT		0x00
> +#define  BCM6368_NAND_STATUS_SHIFT	0
> +#define  BCM6368_NAND_STATUS_MASK	(0xfff << BCM6368_NAND_STATUS_SHIFT)
> +#define  BCM6368_NAND_ENABLE_SHIFT	16
> +#define  BCM6368_NAND_ENABLE_MASK	(0xffff << BCM6368_NAND_ENABLE_SHIFT)
> +#define BCM6368_NAND_BASE_ADDR0	0x04
> +#define BCM6368_NAND_BASE_ADDR1	0x0c
> +
> +enum {
> +	BCM6368_NP_READ		= BIT(0),
> +	BCM6368_BLOCK_ERASE	= BIT(1),
> +	BCM6368_COPY_BACK	= BIT(2),
> +	BCM6368_PAGE_PGM	= BIT(3),
> +	BCM6368_CTRL_READY	= BIT(4),
> +	BCM6368_DEV_RBPIN	= BIT(5),
> +	BCM6368_ECC_ERR_UNC	= BIT(6),
> +	BCM6368_ECC_ERR_CORR	= BIT(7),
> +};
> +
> +static bool bcm6368_nand_intc_ack(struct brcmnand_soc *soc)
> +{
> +	struct bcm6368_nand_soc *priv =
> +			container_of(soc, struct bcm6368_nand_soc, soc);
> +	void __iomem *mmio = priv->base + BCM6368_NAND_INT;
> +	u32 val = brcmnand_readl(mmio);
> +
> +	if (val & (BCM6368_CTRL_READY << BCM6368_NAND_STATUS_SHIFT)) {
> +		/* Ack interrupt */
> +		val &= ~BCM6368_NAND_STATUS_MASK;
> +		val |= BCM6368_CTRL_READY << BCM6368_NAND_STATUS_SHIFT;
> +		brcmnand_writel(val, mmio);
> +		return true;
> +	}
> +
> +	return false;
> +}
> +
> +static void bcm6368_nand_intc_set(struct brcmnand_soc *soc, bool en)
> +{
> +	struct bcm6368_nand_soc *priv =
> +			container_of(soc, struct bcm6368_nand_soc, soc);
> +	void __iomem *mmio = priv->base + BCM6368_NAND_INT;
> +	u32 val = brcmnand_readl(mmio);
> +
> +	/* Don't ack any interrupts */
> +	val &= ~BCM6368_NAND_STATUS_MASK;
> +
> +	if (en)
> +		val |= BCM6368_CTRL_READY << BCM6368_NAND_ENABLE_SHIFT;
> +	else
> +		val &= ~(BCM6368_CTRL_READY << BCM6368_NAND_ENABLE_SHIFT);
> +
> +	brcmnand_writel(val, mmio);
> +}
> +
> +static int bcm6368_nand_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct bcm6368_nand_soc *priv;
> +	struct brcmnand_soc *soc;
> +	struct resource *res;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +	soc = &priv->soc;
> +
> +	res = platform_get_resource_byname(pdev,
> +		IORESOURCE_MEM, "nand-int-base");
> +	if (!res)
> +		return -EINVAL;
> +
> +	priv->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(priv->base))
> +		return PTR_ERR(priv->base);
> +
> +	soc->ctlrdy_ack = bcm6368_nand_intc_ack;
> +	soc->ctlrdy_set_enabled = bcm6368_nand_intc_set;
> +
> +	/* Disable and ack all interrupts  */
> +	brcmnand_writel(0, priv->base + BCM6368_NAND_INT);
> +	brcmnand_writel(BCM6368_NAND_STATUS_MASK,
> +			priv->base + BCM6368_NAND_INT);
> +
> +	return brcmnand_probe(pdev, soc);
> +}
> +
> +static const struct of_device_id bcm6368_nand_of_match[] = {
> +	{ .compatible = "brcm,nand-bcm6368" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, bcm6368_nand_of_match);
> +
> +static struct platform_driver bcm6368_nand_driver = {
> +	.probe			= bcm6368_nand_probe,
> +	.remove			= brcmnand_remove,
> +	.driver = {
> +		.name		= "bcm6368_nand",
> +		.pm		= &brcmnand_pm_ops,
> +		.of_match_table	= bcm6368_nand_of_match,
> +	}
> +};
> +module_platform_driver(bcm6368_nand_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Simon Arlott");
> +MODULE_DESCRIPTION("NAND driver for BCM6368");
> 


-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-12-09 21:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-09 20:40 [PATCH linux-next (v2) 1/3] mtd: brcmnand: Add brcm,bcm6368-nand device tree binding Simon Arlott
     [not found] ` <566891DA.1050208-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-12-09 20:42   ` [PATCH linux-next (v2) 2/3] mtd: brcmnand: Request and enable the clock if present Simon Arlott
     [not found]     ` <56689231.5060907-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-12-09 21:02       ` Florian Fainelli
2015-12-09 20:43 ` [PATCH linux-next (v2) 3/3] mtd: brcmnand: Add support for the BCM6368 Simon Arlott
     [not found]   ` <5668928A.50601-qdVf85lJwsCyrPCCpiK2c/XRex20P6io@public.gmane.org>
2015-12-09 21:04     ` Florian Fainelli [this message]
2015-12-09 21:01 ` [PATCH linux-next (v2) 1/3] mtd: brcmnand: Add brcm,bcm6368-nand device tree binding Florian Fainelli
2015-12-10  2:30   ` Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56689776.20107@gmail.com \
    --to=f.fainelli-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=jogo-p3rKhJxN3npAfugRpC6u6w@public.gmane.org \
    --cc=kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=simon-A6De1vDTPLDsq35pWSNszA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).