From mboxrd@z Thu Jan  1 00:00:00 1970
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Subject: Re: [PATCH v2 13/19] ARM: dts: Add bus nodes using VDD_MIF for
 Exynos4x12
Date: Thu, 10 Dec 2015 12:17:20 +0900
Message-ID: <5668EEC0.80403@samsung.com>
References: <1449634091-1842-1-git-send-email-cw00.choi@samsung.com>
 <1449634091-1842-14-git-send-email-cw00.choi@samsung.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=windows-1252
Content-Transfer-Encoding: 7bit
Return-path: <linux-pm-owner@vger.kernel.org>
In-reply-to: <1449634091-1842-14-git-send-email-cw00.choi@samsung.com>
Sender: linux-pm-owner@vger.kernel.org
To: Chanwoo Choi <cw00.choi@samsung.com>, myungjoo.ham@samsung.com, kgene@kernel.org
Cc: kyungmin.park@samsung.com, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linux@arm.linux.org.uk, tjakobi@math.uni-bielefeld.de, linux.amoon@gmail.com, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On 09.12.2015 13:08, Chanwoo Choi wrote:
> This patch adds the bus noes using VDD_MIF for Exynos4x12 SoC.

s/noes/nodes/

> Exynos4x12 has the following AXI buses to translate data
> between DRAM and DMC/ACP/C2C.
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4x12.dtsi | 72 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 72 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
> index b77dac61ffb5..3bcf0939755e 100644
> --- a/arch/arm/boot/dts/exynos4x12.dtsi
> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
> @@ -282,6 +282,78 @@
>  		clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>;
>  		#iommu-cells = <0>;
>  	};
> +
> +	bus_dmc: bus_dmc {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DIV_DMC>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_dmc_opp_table>;
> +		status = "disabled";
> +	};
> +
> +	bus_acp: bus_acp {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DIV_ACP>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_acp_opp_table>;
> +		status = "disabled";
> +	};
> +
> +	bus_c2c: bus_c2c {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DIV_C2C>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_dmc_opp_table>;
> +		status = "disabled";
> +	};
> +
> +	bus_dmc_opp_table: opp_table1 {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp00 {
> +			opp-hz = /bits/ 64 <100000000>;
> +			opp-microvolt = <900000>;
> +		};
> +		opp01 {
> +			opp-hz = /bits/ 64 <134000000>;
> +			opp-microvolt = <900000>;
> +		};
> +		opp02 {
> +			opp-hz = /bits/ 64 <160000000>;
> +			opp-microvolt = <900000>;
> +		};
> +		opp03 {
> +			opp-hz = /bits/ 64 <200000000>;
> +			opp-microvolt = <950000>;

The exyno4_bus.c (from mainline) uses 267 MHz here. Why choosing 200 MHz?

Best regards,
Krzysztof