From: Caesar Wang <caesar.upstream-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Xing Zheng <zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
keescook-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
leozwang-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org
Subject: Re: [PATCH 4/4] ARM: dts: rockchip: Add support emac for RK3036
Date: Fri, 25 Dec 2015 10:36:04 +0800 [thread overview]
Message-ID: <567CAB94.7090701@gmail.com> (raw)
In-Reply-To: <1450862390-407-4-git-send-email-zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Hi Xing,
在 2015年12月23日 17:19, Xing Zheng 写道:
> This patch describe the emac, and we need to let mac clock under
> the APLL which is able to provide the accurate 50MHz what mac_ref
> need.
>
> Signed-off-by: Xing Zheng <zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
>
> arch/arm/boot/dts/rk3036-evb.dts | 25 +++++++++++++++++++++++++
> arch/arm/boot/dts/rk3036-kylin.dts | 23 +++++++++++++++++++++++
> arch/arm/boot/dts/rk3036.dtsi | 32 ++++++++++++++++++++++++++++++++
> 3 files changed, 80 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
> index 28a0336..69b96e6 100644
> --- a/arch/arm/boot/dts/rk3036-evb.dts
> +++ b/arch/arm/boot/dts/rk3036-evb.dts
> @@ -62,3 +62,28 @@
> &uart2 {
> status = "okay";
> };
> +
> +&emac {
> + assigned-clocks = <&cru SCLK_MACPLL>;
> + assigned-clock-parents = <&cru PLL_APLL>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
> + phy = <&phy0>;
> + status = "okay";
> +
> + phy0: ethernet-phy@0 {
> + reg = <0>;
> + };
> +};
> +
> +&pinctrl {
> + pcfg_output_high: pcfg-output-high {
> + output-high;
> + };
> +
That's seem a new preperty for pinctrl on rk3036, we should submit it in
rk3036 dtsi.
Do we are really need it?
GPIO2_C6 is pulled up in internal chip.
So, maybe you only do that:
rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_pull_default>;
> + emac {
> + rmii_rst: rmii-rst {
> + rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
> index 992f9ca..3fb1cfe 100644
> --- a/arch/arm/boot/dts/rk3036-kylin.dts
> +++ b/arch/arm/boot/dts/rk3036-kylin.dts
> @@ -285,7 +285,24 @@
> status = "okay";
> };
>
> +&emac {
> + assigned-clocks = <&cru SCLK_MACPLL>;
> + assigned-clock-parents = <&cru PLL_APLL>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
> + phy = <&phy0>;
> + status = "okay";
> +
> + phy0: ethernet-phy@0 {
> + reg = <0>;
> + };
> +};
> +
> &pinctrl {
> + pcfg_output_high: pcfg-output-high {
> + output-high;
> + };
> +
> pmic {
> pmic_int: pmic-int {
> rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
> @@ -297,4 +314,10 @@
> rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
> };
> };
> +
> + emac {
> + rmii_rst: rmii-rst {
> + rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
> + };
> + };
> };
> diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
> index b9567c1..0c09fb3 100644
> --- a/arch/arm/boot/dts/rk3036.dtsi
> +++ b/arch/arm/boot/dts/rk3036.dtsi
> @@ -186,6 +186,20 @@
> status = "disabled";
> };
>
> + emac: ethernet@10200000 {
> + compatible = "rockchip,rk3036-emac", "snps,arc-emac";
> + reg = <0x10200000 0x4000>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + rockchip,grf = <&grf>;
> + clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
> + clock-names = "hclk", "macref", "macclk";
> + max-speed = <100>;
> + phy-mode = "rmii";
> + status = "disabled";
> + };
> +
> sdmmc: dwmmc@10214000 {
> compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
> reg = <0x10214000 0x4000>;
> @@ -556,6 +570,24 @@
> };
> };
>
> + emac {
> + emac_xfer: emac-xfer {
> + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_none>, /* crs_dvalid */
> + <2 13 RK_FUNC_1 &pcfg_pull_none>, /* tx_en */
> + <2 14 RK_FUNC_1 &pcfg_pull_none>, /* mac_clk */
> + <2 15 RK_FUNC_1 &pcfg_pull_none>, /* rx_err */
> + <2 16 RK_FUNC_1 &pcfg_pull_none>, /* rxd1 */
> + <2 17 RK_FUNC_1 &pcfg_pull_none>, /* rxd0 */
> + <2 18 RK_FUNC_1 &pcfg_pull_none>, /* txd1 */
> + <2 19 RK_FUNC_1 &pcfg_pull_none>; /* txd0 */
> + };
> +
> + emac_mdio: emac-mdio {
> + rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_none>, /* mac_md */
> + <2 25 RK_FUNC_1 &pcfg_pull_none>; /* mac_mdclk */
> + };
> + };
> +
> i2c0 {
> i2c0_xfer: i2c0-xfer {
> rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
--
Thanks,
Caesar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2015-12-25 2:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1450862390-407-1-git-send-email-zhengxing@rock-chips.com>
[not found] ` <1450862390-407-1-git-send-email-zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-12-23 9:19 ` [PATCH 4/4] ARM: dts: rockchip: Add support emac for RK3036 Xing Zheng
[not found] ` <1450862390-407-4-git-send-email-zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-12-23 19:52 ` kbuild test robot
2015-12-25 2:36 ` Caesar Wang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=567CAB94.7090701@gmail.com \
--to=caesar.upstream-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=keescook-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=leozwang-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).