From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Subject: Re: [PATCH] arm: dts: zynq: Add MicroZed board support Date: Tue, 12 Jan 2016 16:19:58 +0530 Message-ID: <5694DA56.70704@openedev.com> References: <1452578026-4496-1-git-send-email-jteki@openedev.com> <5694D8D8.1050204@xilinx.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <5694D8D8.1050204-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Michal Simek , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Soren Brinkmann List-Id: devicetree@vger.kernel.org On Tuesday 12 January 2016 04:13 PM, Michal Simek wrote: > On 12.1.2016 06:53, Jagan Teki wrote: >> Added basic dts support for MicroZed board. >> >> Cc: Soren Brinkmann >> Cc: Michal Simek >> Signed-off-by: Jagan Teki >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/zynq-microzed.dts | 45 +++++++++++++++++++++++++++++++++++++ >> 2 files changed, 46 insertions(+) >> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 30bbc37..9eb52fa 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -725,6 +725,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ >> wm8750-apc8750.dtb \ >> wm8850-w70v2.dtb >> dtb-$(CONFIG_ARCH_ZYNQ) += \ >> + zynq-microzed.dtb \ >> zynq-parallella.dtb \ >> zynq-zc702.dtb \ >> zynq-zc706.dtb \ >> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts >> new file mode 100644 >> index 0000000..a8c7d2b >> --- /dev/null >> +++ b/arch/arm/boot/dts/zynq-microzed.dts >> @@ -0,0 +1,45 @@ >> +/* >> + * Copyright (C) 2015 Jagan Teki >> + * >> + * This software is licensed under the terms of the GNU General Public >> + * License version 2, as published by the Free Software Foundation, and >> + * may be copied, distributed, and modified under those terms. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> +/dts-v1/; >> +/include/ "zynq-7000.dtsi" >> + >> +/ { >> + model = "Zynq MicroZED Development Board"; >> + compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; >> + >> + aliases { >> + serial0 = &uart1; >> + }; >> + >> + memory { >> + device_type = "memory"; >> + reg = <0x0 0x40000000>; >> + }; >> + >> + chosen { >> + bootargs = "earlyprintk"; >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&clkc { >> + ps-clk-frequency = <33333333>; >> +}; >> + >> +&sdhci0 { >> + status = "okay"; >> +}; >> + >> +&uart1 { >> + status = "okay"; >> +}; >> > > I would prefer to have full description of this board instead of partial > one. In U-Boot there is also qspi enabled. Board has also USB and > ethernet that's why all of these should be enabled and tested. I have verified what all I added like uart, mmc ie why I described as basic support. May be we can move this first and rest will add in future like USB and Ethernet. For qspi the driver is not mainlined yet. -- Jagan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html