Re: [RFC PATCH 0/4] mtd: atmel_nand: Add support for NAND Flash on SAMA5D2

[Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>]

Le 13/01/2016 13:56, Romain Izard a écrit :
> 2016-01-13 12:46 GMT+01:00 Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>:
>>> Ok. It might be a good idea to update the MAINTAINERS file, as Josh Wu's
>>> atmel address now bounces, and it is still referenced there.
>>
>> It's already done and pushed to arm-soc. It's in linux-next:
>> http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/MAINTAINERS#n2000
>>
>> It will appear in Linus' tree in a couple of days ;-)
>>
> Good. As I based my developments on the linux-4.1-at91 branch from the Linux4SAM
> github which does not contain the update, I missed it.
> 
>>>> I also think that Wenyou did some work regarding this support. So you'll
>>>> have to coordinat together.
>>>
>>> Is it possible to know what are the developments in progress regarding
>>> SAMA5D2 drivers? The github repository does not expose any working trees,
>>> and only the
>>
>> Which github repository are you talking about?
>>
>> The Linux4SAM github contains all that is need to work with sama5d2
>> (linux-4.1-at91 branch):
>> https://github.com/linux4sam/linux-at91/tree/linux-4.1-at91
> 
> That's the one. My point is that there is no hint in there that Wenyou worked
> on supporting the NAND controller for SAMA5D2. So I wondered if there were
> other repositories I missed with more recent information.

Yes, that's very recent actually and we were testing internally just
before releasing it.
The reason is also that we didn't have a NAND flash on our reference
platform which is the SAMA5D2 Xplained. So we had to wait for a new
hardware from our colleagues of the HW team and bring it up before
working on this NAND flash support (24 bits ECC and sama5d2 new
modifications in fact).

>> Developments in progress are listed in the Linux4SAM page:
>> http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d2XplainedMainPage
>>
>> I admit that it's not copleted, but you'll have an idea here as well:
>> http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d2XplainedMainPage

Yes, I was meaning:
http://www.at91.com/linux4sam/bin/view/Linux4SAM/LinuxKernel#Tags

> Both URLs are the same, are you sure it's the correct link? It's a very
> informative page and I often use it when I need information on the SAMA5D2.
> But I have a hard time finding something about work in progress in it.

Yes, we lack this kind of important information. It's scattered on some
messages on the arm-linux-kernel mailing-list as we tend to publish
pretty early in our work process (Cf. the new ADC driver by Ludovic). I
don't promise but we will try to enhance this aspect in the near
future... ;-)

Thanks for your work and your feedback.

Bye,
-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html