From mboxrd@z Thu Jan 1 00:00:00 1970 From: Akshay Bhat Subject: Re: [PATCH v6 0/7] ARM: dts: Add Advantech board support Date: Wed, 27 Jan 2016 11:31:59 -0500 Message-ID: <56A8F0FF.7020308@timesys.com> References: <1450908016-17384-1-git-send-email-akshay.bhat@timesys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Sascha Hauer , Shawn Guo Cc: Rob Herring , Russell King - ARM Linux , Kumar Gala , Mark Rutland , Ian Campbell , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Justin Waters , Lucas Stach , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Sascha, On 01/09/2016 05:32 AM, Akshay Bhat wrote: > Shawn, > > Did you have any further feedback on this patch set? If not can it be applied? I haven't seen any response from Shawn and seems like there has been no activity in his git tree for the last 5 weeks. Was wondering if you would be able to provide further feedback (if any) and/or apply the patches. Appreciate your help. Thanks, Akshay > > Thanks, > Akshay > > On Thu, Dec 24, 2015 at 3:30 AM, Akshay Bhat wrote: >> This series aims to add Advantech BA-16 module (iMX6 based) and GE board support. >> >> This series has been tested against linux-next tag next-20151223. >> >> Modifications: >> v5->v6: >> - BA16: >> Add missing dlg,da9063-onkey compatibility >> Revert partitions container for spi-nor flash >> Address below comments from Shawn: >> Update to GPL/X11 dual license >> Add new line between properties and sub-nodes; between nodes >> Consistently use lowercase for hex values >> Move iomux node to bottom of dts file for easier readability >> Get rid of imx6q-ba16 container to save on indentation >> Reduce the number of entries in hog group >> Sort pinctrl nodes alphabetically >> Explicitly call out pad configuration value instead of 0x80000000 >> - Bx50v3: >> Update to GPL/X11 dual license >> Remove @unit-address for regulators as per Shawn's suggestion >> - B450v3, B650v3 and B850v3: >> Update to GPL/X11 dual license >> >> History: >> -------- >> [v1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-October/381872.html >> [v2]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-November/383276.html >> [v3]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-November/384202.html >> [v4]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/390373.html >> [v5]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/390788.html >> >> Akshay Bhat (5): >> of: Add vendor prefix for Advantech Corporation >> of: Add vendor prefix for General Electric Company >> ARM: dts: imx: Add support for Advantech/GE B450v3 >> ARM: dts: imx: Add support for Advantech/GE B650v3 >> ARM: dts: imx: Add support for Advantech/GE B850v3 >> >> Justin Waters (2): >> ARM: dts: imx: Add Advantech BA-16 Qseven module >> ARM: dts: imx: Add support for Advantech/GE Bx50v3 >> >> .../devicetree/bindings/vendor-prefixes.txt | 2 + >> arch/arm/boot/dts/Makefile | 3 + >> arch/arm/boot/dts/imx6q-b450v3.dts | 114 ++++ >> arch/arm/boot/dts/imx6q-b650v3.dts | 114 ++++ >> arch/arm/boot/dts/imx6q-b850v3.dts | 157 +++++ >> arch/arm/boot/dts/imx6q-ba16.dtsi | 641 +++++++++++++++++++++ >> arch/arm/boot/dts/imx6q-bx50v3.dtsi | 237 ++++++++ >> 7 files changed, 1268 insertions(+) >> create mode 100644 arch/arm/boot/dts/imx6q-b450v3.dts >> create mode 100644 arch/arm/boot/dts/imx6q-b650v3.dts >> create mode 100644 arch/arm/boot/dts/imx6q-b850v3.dts >> create mode 100644 arch/arm/boot/dts/imx6q-ba16.dtsi >> create mode 100644 arch/arm/boot/dts/imx6q-bx50v3.dtsi >> >> -- >> 2.6.3 >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html