[PATCH] iio: light: opt3001: Add device tree binding documentation

[PATCH] iio: light: opt3001: Add device tree binding documentation

[Andreas Dannenberg]

Signed-off-by: Andreas Dannenberg <dannenberg-l0cyMroinI0@public.gmane.org>
---
 .../devicetree/bindings/iio/light/opt3001.txt      | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/opt3001.txt

diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
new file mode 100644
index 0000000..55b9cb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
@@ -0,0 +1,26 @@
+* Texas Instruments OPT3001 Ambient Light Sensor
+
+The driver supports interrupt-driven and interrupt-less operation, depending
+on whether an interrupt property has been populated into the DT. Note that
+the optional generation of IIO events on rising/falling light threshold changes
+requires the use of interrupts. Without interrupts, only the simple reading
+of the current light value is supported through the IIO API.
+
+http://www.ti.com/product/opt3001
+
+Required properties:
+  - compatible: should be "ti,opt3001"
+  - reg: the I2C address of the sensor
+  
+Optional properties:
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
+
+Example:
+
+opt3001@44 {
+	compatible = "ti,opt3001";
+	reg = <0x44>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+};
-- 
2.6.4

Re: [PATCH] iio: light: opt3001: Add device tree binding documentation

[Jonathan Cameron]

On 29/01/16 19:03, Andreas Dannenberg wrote:
> Signed-off-by: Andreas Dannenberg <dannenberg-l0cyMroinI0@public.gmane.org>
Looks straight forward enough I'm happy to take this in a few
weeks with out a devicetree ack.  (though one is as ever welcome!)

In case anyone was wondering, this is retro-documentation - all that has
changed recently is the addition of support for running without an interrupt
line.

Jonathan
> ---
>  .../devicetree/bindings/iio/light/opt3001.txt      | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/light/opt3001.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> new file mode 100644
> index 0000000..55b9cb3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> @@ -0,0 +1,26 @@
> +* Texas Instruments OPT3001 Ambient Light Sensor
> +
> +The driver supports interrupt-driven and interrupt-less operation, depending
> +on whether an interrupt property has been populated into the DT. Note that
> +the optional generation of IIO events on rising/falling light threshold changes
> +requires the use of interrupts. Without interrupts, only the simple reading
> +of the current light value is supported through the IIO API.
> +
> +http://www.ti.com/product/opt3001
> +
> +Required properties:
> +  - compatible: should be "ti,opt3001"
> +  - reg: the I2C address of the sensor
> +  
> +Optional properties:
> +  - interrupt-parent: should be the phandle for the interrupt controller
> +  - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
> +
> +Example:
> +
> +opt3001@44 {
> +	compatible = "ti,opt3001";
> +	reg = <0x44>;
> +	interrupt-parent = <&gpio1>;
> +	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> +};
> 

Re: [PATCH] iio: light: opt3001: Add device tree binding documentation

[Rob Herring]

On Fri, Jan 29, 2016 at 01:03:00PM -0600, Andreas Dannenberg wrote:
> Signed-off-by: Andreas Dannenberg <dannenberg-l0cyMroinI0@public.gmane.org>
> ---
>  .../devicetree/bindings/iio/light/opt3001.txt      | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/light/opt3001.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> new file mode 100644
> index 0000000..55b9cb3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> @@ -0,0 +1,26 @@
> +* Texas Instruments OPT3001 Ambient Light Sensor
> +
> +The driver supports interrupt-driven and interrupt-less operation, depending
> +on whether an interrupt property has been populated into the DT. Note that
> +the optional generation of IIO events on rising/falling light threshold changes
> +requires the use of interrupts. Without interrupts, only the simple reading
> +of the current light value is supported through the IIO API.

Seems like you could poll and do the threshold changes in s/w. Anyway, 
that's all irrelevant to the DT binding.

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

Re: [PATCH] iio: light: opt3001: Add device tree binding documentation

[Jonathan Cameron]

On 01/02/16 15:18, Rob Herring wrote:
> On Fri, Jan 29, 2016 at 01:03:00PM -0600, Andreas Dannenberg wrote:
>> Signed-off-by: Andreas Dannenberg <dannenberg-l0cyMroinI0@public.gmane.org>
>> ---
>>  .../devicetree/bindings/iio/light/opt3001.txt      | 26 ++++++++++++++++++++++
>>  1 file changed, 26 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/iio/light/opt3001.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
>> new file mode 100644
>> index 0000000..55b9cb3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
>> @@ -0,0 +1,26 @@
>> +* Texas Instruments OPT3001 Ambient Light Sensor
>> +
>> +The driver supports interrupt-driven and interrupt-less operation, depending
>> +on whether an interrupt property has been populated into the DT. Note that
>> +the optional generation of IIO events on rising/falling light threshold changes
>> +requires the use of interrupts. Without interrupts, only the simple reading
>> +of the current light value is supported through the IIO API.
> 
> Seems like you could poll and do the threshold changes in s/w. Anyway, 
> that's all irrelevant to the DT binding.
> 
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Oddity occurred during a merge or patch application at some point as I actually had
some docs in my local tree copy for this, but they weren't being tracked by git.

Checking back, the original patch series did have docs so not sure what rabbit
hole these dropped down.  Anyhow, easiest option for me is to just apply this
patch and not chase down where the original went!

Have added a note to the commit to this effect.  Applied to the togreg
branch of iio.git.

Thanks,

Jonathan
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH] iio: light: opt3001: Add device tree binding documentation

[Andreas Dannenberg]

On Mon, Feb 01, 2016 at 09:18:48AM -0600, Rob Herring wrote:
> On Fri, Jan 29, 2016 at 01:03:00PM -0600, Andreas Dannenberg wrote:
> > Signed-off-by: Andreas Dannenberg <dannenberg-l0cyMroinI0@public.gmane.org>
> > ---
> >  .../devicetree/bindings/iio/light/opt3001.txt      | 26 ++++++++++++++++++++++
> >  1 file changed, 26 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/light/opt3001.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> > new file mode 100644
> > index 0000000..55b9cb3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> > @@ -0,0 +1,26 @@
> > +* Texas Instruments OPT3001 Ambient Light Sensor
> > +
> > +The driver supports interrupt-driven and interrupt-less operation, depending
> > +on whether an interrupt property has been populated into the DT. Note that
> > +the optional generation of IIO events on rising/falling light threshold changes
> > +requires the use of interrupts. Without interrupts, only the simple reading
> > +of the current light value is supported through the IIO API.
> 
> Seems like you could poll and do the threshold changes in s/w. Anyway, 
> that's all irrelevant to the DT binding.

True that. The recent addition of polling mode to the driver did not
consider this use case so until somebody has a strong need for this and
adds the needed code at least we have this limitation documented.

Regards,
Andreas


> 
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>