* [PATCH v2 01/10] dt-bindings: document the MPS2 timer bindings
2016-02-02 11:39 [PATCH v2 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
@ 2016-02-02 11:39 ` Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 02/10] clockevents/drivers: add MPS2 Timer driver Vladimir Murzin
` (8 subsequent siblings)
9 siblings, 0 replies; 18+ messages in thread
From: Vladimir Murzin @ 2016-02-02 11:39 UTC (permalink / raw)
To: arnd, linux, gregkh, daniel.lezcano, tglx, u.kleine-koenig
Cc: mark.rutland, devicetree, pawel.moll, ijc+devicetree, linux-api,
linux-kernel, andy.shevchenko, robh+dt, linux-serial, galak,
jslaby, linux-arm-kernel
This adds documentation of device tree bindings for the
timers found on ARM MPS2 platform.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/timer/arm,mps2-timer.txt | 28 ++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/arm,mps2-timer.txt
diff --git a/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt b/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt
new file mode 100644
index 0000000..48f84d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt
@@ -0,0 +1,28 @@
+ARM MPS2 timer
+
+The MPS2 platform has simple general-purpose 32 bits timers.
+
+Required properties:
+- compatible : Should be "arm,mps2-timer"
+- reg : Address and length of the register set
+- interrupts : Reference to the timer interrupt
+
+Required clocking property, have to be one of:
+- clocks : The input clock of the timer
+- clock-frequency : The rate in HZ in input of the ARM MPS2 timer
+
+Examples:
+
+timer1: mps2-timer@40000000 {
+ compatible = "arm,mps2-timer";
+ reg = <0x40000000 0x1000>;
+ interrupts = <8>;
+ clocks = <&sysclk>;
+};
+
+timer2: mps2-timer@40001000 {
+ compatible = "arm,mps2-timer";
+ reg = <0x40001000 0x1000>;
+ interrupts = <9>;
+ clock-frequency = <25000000>;
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 02/10] clockevents/drivers: add MPS2 Timer driver
2016-02-02 11:39 [PATCH v2 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 01/10] dt-bindings: document the MPS2 timer bindings Vladimir Murzin
@ 2016-02-02 11:39 ` Vladimir Murzin
[not found] ` <1454413199-26573-3-git-send-email-vladimir.murzin-5wv7dgnIgG8@public.gmane.org>
2016-02-02 11:39 ` [PATCH v2 03/10] dt-bindings: document the MPS2 UART bindings Vladimir Murzin
` (7 subsequent siblings)
9 siblings, 1 reply; 18+ messages in thread
From: Vladimir Murzin @ 2016-02-02 11:39 UTC (permalink / raw)
To: arnd, linux, gregkh, daniel.lezcano, tglx, u.kleine-koenig
Cc: andy.shevchenko, mark.rutland, pawel.moll, ijc+devicetree, galak,
jslaby, robh+dt, devicetree, linux-serial, linux-api,
linux-arm-kernel, linux-kernel
MPS2 platform has simple 32 bits general purpose countdown timers.
The driver uses the first detected timer as a clocksource and the rest
of the timers as a clockevent
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/Kconfig | 6 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/mps2-timer.c | 276 ++++++++++++++++++++++++++++++++++++++
3 files changed, 283 insertions(+)
create mode 100644 drivers/clocksource/mps2-timer.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 33db740..7ce3892 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -185,6 +185,12 @@ config CLKSRC_STM32
depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
select CLKSRC_MMIO
+config CLKSRC_MPS2
+ bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
+ depends on GENERIC_SCHED_CLOCK
+ select CLKSRC_MMIO
+ select CLKSRC_OF
+
config ARM_ARCH_TIMER
bool
select CLKSRC_OF if OF
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index dc2b899..b0a3c96 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_LPC32XX) += time-lpc32xx.o
+obj-$(CONFIG_CLKSRC_MPS2) += mps2-timer.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
diff --git a/drivers/clocksource/mps2-timer.c b/drivers/clocksource/mps2-timer.c
new file mode 100644
index 0000000..0f529e9f
--- /dev/null
+++ b/drivers/clocksource/mps2-timer.c
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#define TIMER_CTRL 0x0
+#define TIMER_CTRL_ENABLE BIT(0)
+#define TIMER_CTRL_IE BIT(3)
+
+#define TIMER_VALUE 0x4
+#define TIMER_RELOAD 0x8
+#define TIMER_INT 0xc
+
+struct clockevent_mps2 {
+ void __iomem *reg;
+ u32 clock_count_per_tick;
+ struct clock_event_device clkevt;
+};
+
+static void __iomem *sched_clock_base;
+
+static u64 notrace mps2_sched_read(void)
+{
+ return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
+}
+
+static inline struct clockevent_mps2 *to_mps2_clkevt(struct clock_event_device *c)
+{
+ return container_of(c, struct clockevent_mps2, clkevt);
+}
+
+static void clockevent_mps2_writel(u32 val, struct clock_event_device *c, u32 offset)
+{
+ writel_relaxed(val, to_mps2_clkevt(c)->reg + offset);
+}
+
+static int mps2_timer_shutdown(struct clock_event_device *ce)
+{
+ clockevent_mps2_writel(0, ce, TIMER_RELOAD);
+ clockevent_mps2_writel(0, ce, TIMER_CTRL);
+
+ return 0;
+}
+
+static int mps2_timer_set_next_event(unsigned long next, struct clock_event_device *ce)
+{
+ clockevent_mps2_writel(next, ce, TIMER_VALUE);
+ clockevent_mps2_writel(TIMER_CTRL_IE | TIMER_CTRL_ENABLE, ce, TIMER_CTRL);
+
+ return 0;
+}
+
+static int mps2_timer_set_periodic(struct clock_event_device *ce)
+{
+ u32 clock_count_per_tick = to_mps2_clkevt(ce)->clock_count_per_tick;
+
+ clockevent_mps2_writel(clock_count_per_tick, ce, TIMER_RELOAD);
+ clockevent_mps2_writel(clock_count_per_tick, ce, TIMER_VALUE);
+ clockevent_mps2_writel(TIMER_CTRL_IE | TIMER_CTRL_ENABLE, ce, TIMER_CTRL);
+
+ return 0;
+}
+
+static irqreturn_t mps2_timer_interrupt(int irq, void *dev_id)
+{
+ struct clockevent_mps2 *ce = dev_id;
+ u32 status = readl_relaxed(ce->reg + TIMER_INT);
+
+ if (!status) {
+ pr_warn("spurious interrupt\n");
+ return IRQ_NONE;
+ }
+
+ writel_relaxed(1, ce->reg + TIMER_INT);
+
+ ce->clkevt.event_handler(&ce->clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init mps2_clockevent_init(struct device_node *np)
+{
+ void __iomem *base;
+ struct clk *clk;
+ struct clockevent_mps2 *ce;
+ u32 rate;
+ int irq, ret;
+ const char *name = "mps2-clkevt";
+
+ ret = of_property_read_u32(np, "clock-frequency", &rate);
+ if (ret) {
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ pr_err("failed to get clock for clockevent: %d\n", ret);
+ goto err_clk_get;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("failed to enable clock for clockevent: %d\n", ret);
+ clk_put(clk);
+ goto err_clk_enable;
+ }
+
+ rate = clk_get_rate(clk);
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ ret = -EADDRNOTAVAIL;
+ pr_err("failed to map register for clockevent: %d\n", ret);
+ goto err_iomap;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ ret = -ENOENT;
+ pr_err("failed to get irq for clockevent: %d\n", ret);
+ goto err_get_irq;
+ }
+
+ ce = kzalloc(sizeof(struct clockevent_mps2), GFP_KERNEL);
+ if (!ce) {
+ ret = -ENOMEM;
+ goto err_ce_alloc;
+ }
+
+ ce->reg = base;
+ ce->clock_count_per_tick = DIV_ROUND_CLOSEST(rate, HZ);
+ ce->clkevt.irq = irq;
+ ce->clkevt.name = name;
+ ce->clkevt.rating = 200;
+ ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ ce->clkevt.cpumask = cpu_possible_mask;
+ ce->clkevt.set_state_shutdown = mps2_timer_shutdown,
+ ce->clkevt.set_state_periodic = mps2_timer_set_periodic,
+ ce->clkevt.set_state_oneshot = mps2_timer_shutdown,
+ ce->clkevt.set_next_event = mps2_timer_set_next_event;
+
+ /* Ensure timer is disabled */
+ writel_relaxed(0, base + TIMER_CTRL);
+
+ ret = request_irq(irq, mps2_timer_interrupt, IRQF_TIMER, name, ce);
+ if (ret) {
+ pr_err("failed to request irq: %d\n", ret);
+ goto err_ia_alloc;
+ }
+
+ clockevents_config_and_register(&ce->clkevt, rate, 0xf, 0xffffffff);
+
+ return 0;
+
+err_ia_alloc:
+ kfree(ce);
+err_ce_alloc:
+err_get_irq:
+ iounmap(base);
+err_iomap:
+ clk_disable_unprepare(clk);
+err_clk_enable:
+ clk_put(clk);
+err_clk_get:
+ return ret;
+}
+
+static int __init mps2_clocksource_init(struct device_node *np)
+{
+ void __iomem *base;
+ struct clk *clk;
+ u32 rate;
+ int ret;
+ const char *name = "mps2-clksrc";
+
+ ret = of_property_read_u32(np, "clock-frequency", &rate);
+ if (ret) {
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ pr_err("failed to get clock for clocksource: %d\n", ret);
+ goto err_clk_get;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("failed to enable clock for clocksource: %d\n", ret);
+ clk_put(clk);
+ goto err_clk_enable;
+ }
+
+ rate = clk_get_rate(clk);
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ ret = -EADDRNOTAVAIL;
+ pr_err("failed to map register for clocksource: %d\n", ret);
+ goto err_iomap;
+ }
+
+ /* Ensure timer is disabled */
+ writel_relaxed(0, base + TIMER_CTRL);
+
+ /* ... and set it up as free-running clocksource */
+ writel_relaxed(0xffffffff, base + TIMER_VALUE);
+ writel_relaxed(0xffffffff, base + TIMER_RELOAD);
+
+ writel_relaxed(TIMER_CTRL_ENABLE, base + TIMER_CTRL);
+
+ ret = clocksource_mmio_init(base + TIMER_VALUE, name,
+ rate, 200, 32,
+ clocksource_mmio_readl_down);
+ if (ret) {
+ pr_err("failed to init clocksource: %d\n", ret);
+ goto err_clocksource_init;
+ }
+
+ sched_clock_base = base;
+ sched_clock_register(mps2_sched_read, 32, rate);
+
+ return 0;
+
+err_clocksource_init:
+ iounmap(base);
+err_iomap:
+ clk_disable_unprepare(clk);
+err_clk_enable:
+ clk_put(clk);
+err_clk_get:
+ return ret;
+}
+
+static void __init mps2_timer_init(struct device_node *np)
+{
+ static int has_clocksource, has_clockevent;
+ int ret;
+
+ if (!has_clocksource) {
+ ret = mps2_clocksource_init(np);
+ if (!ret) {
+ has_clocksource = 1;
+ return;
+ }
+ }
+
+ if (!has_clockevent) {
+ ret = mps2_clockevent_init(np);
+ if (!ret) {
+ has_clockevent = 1;
+ return;
+ }
+ }
+}
+
+CLOCKSOURCE_OF_DECLARE(mps2_timer, "arm,mps2-timer", mps2_timer_init);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 03/10] dt-bindings: document the MPS2 UART bindings
2016-02-02 11:39 [PATCH v2 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 01/10] dt-bindings: document the MPS2 timer bindings Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 02/10] clockevents/drivers: add MPS2 Timer driver Vladimir Murzin
@ 2016-02-02 11:39 ` Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 04/10] serial: mps2-uart: add MPS2 UART driver Vladimir Murzin
` (6 subsequent siblings)
9 siblings, 0 replies; 18+ messages in thread
From: Vladimir Murzin @ 2016-02-02 11:39 UTC (permalink / raw)
To: arnd, linux, gregkh, daniel.lezcano, tglx, u.kleine-koenig
Cc: andy.shevchenko, mark.rutland, pawel.moll, ijc+devicetree, galak,
jslaby, robh+dt, devicetree, linux-serial, linux-api,
linux-arm-kernel, linux-kernel
This adds documentation of device tree bindings for the
UART found on ARM MPS2 platform
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Rob Herring <robh@kernel.org
---
.../devicetree/bindings/serial/arm,mps2-uart.txt | 22 ++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
diff --git a/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
new file mode 100644
index 0000000..b3f7cb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
@@ -0,0 +1,22 @@
+ARM MPS2 UART
+
+Required properties:
+- compatible : Should be "arm,mps2-uart"
+- reg : Address and length of the register set
+- interrupts : Reference to the UART RX, TX and overrun interrupts
+
+Required clocking property:
+- clocks : The input clock of the UART
+
+
+Examples:
+
+uart0: serial@40004000 {
+ compatible = "arm,mps2-uart";
+ reg = <0x40004000 0x1000>;
+ interrupts = <0 1 12>;
+ clocks = <&sysclk>;
+};
+
+
+
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 04/10] serial: mps2-uart: add MPS2 UART driver
2016-02-02 11:39 [PATCH v2 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
` (2 preceding siblings ...)
2016-02-02 11:39 ` [PATCH v2 03/10] dt-bindings: document the MPS2 UART bindings Vladimir Murzin
@ 2016-02-02 11:39 ` Vladimir Murzin
[not found] ` <1454413199-26573-5-git-send-email-vladimir.murzin-5wv7dgnIgG8@public.gmane.org>
2016-02-02 11:39 ` [PATCH v2 05/10] serial: mps2-uart: add support for early console Vladimir Murzin
` (5 subsequent siblings)
9 siblings, 1 reply; 18+ messages in thread
From: Vladimir Murzin @ 2016-02-02 11:39 UTC (permalink / raw)
To: arnd, linux, gregkh, daniel.lezcano, tglx, u.kleine-koenig
Cc: andy.shevchenko, mark.rutland, pawel.moll, ijc+devicetree, galak,
jslaby, robh+dt, devicetree, linux-serial, linux-api,
linux-arm-kernel, linux-kernel
This driver adds support to the UART controller found on ARM MPS2
platform.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
---
drivers/tty/serial/Kconfig | 12 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/mps2-uart.c | 584 ++++++++++++++++++++++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
4 files changed, 600 insertions(+)
create mode 100644 drivers/tty/serial/mps2-uart.c
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 39721ec..3a248be 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1450,6 +1450,18 @@ config SERIAL_EFM32_UART
This driver support the USART and UART ports on
Energy Micro's efm32 SoCs.
+config SERIAL_MPS2_UART_CONSOLE
+ bool "MPS2 UART console support"
+ depends on SERIAL_MPS2_UART
+ select SERIAL_CORE_CONSOLE
+
+config SERIAL_MPS2_UART
+ bool "MPS2 UART port"
+ depends on ARM || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ This driver support the UART ports on ARM MPS2.
+
config SERIAL_EFM32_UART_CONSOLE
bool "EFM32 UART/USART console support"
depends on SERIAL_EFM32_UART=y
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index b391c9b..1062503 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -91,6 +91,7 @@ obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o
obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o
+obj-$(CONFIG_SERIAL_MPS2_UART) += mps2-uart.o
# GPIOLIB helpers for modem control lines
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
new file mode 100644
index 0000000..4d113ec
--- /dev/null
+++ b/drivers/tty/serial/mps2-uart.c
@@ -0,0 +1,584 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO: support for SysRq
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/tty_flip.h>
+#include <linux/types.h>
+
+#define SERIAL_NAME "ttyS"
+#define DRIVER_NAME "mps2-uart"
+#define MAKE_NAME(x) (DRIVER_NAME # x)
+
+#define UARTn_DATA 0x00
+
+#define UARTn_STATE 0x04
+#define UARTn_STATE_TX_FULL BIT(0)
+#define UARTn_STATE_RX_FULL BIT(1)
+#define UARTn_STATE_TX_OVERRUN BIT(2)
+#define UARTn_STATE_RX_OVERRUN BIT(3)
+
+#define UARTn_CTRL 0x08
+#define UARTn_CTRL_TX_ENABLE BIT(0)
+#define UARTn_CTRL_RX_ENABLE BIT(1)
+#define UARTn_CTRL_TX_INT_ENABLE BIT(2)
+#define UARTn_CTRL_RX_INT_ENABLE BIT(3)
+#define UARTn_CTRL_TX_OVERRUN_INT_ENABLE BIT(4)
+#define UARTn_CTRL_RX_OVERRUN_INT_ENABLE BIT(5)
+
+#define UARTn_INT 0x0c
+#define UARTn_INT_TX BIT(0)
+#define UARTn_INT_RX BIT(1)
+#define UARTn_INT_TX_OVERRUN BIT(2)
+#define UARTn_INT_RX_OVERRUN BIT(3)
+
+#define UARTn_BAUDDIV 0x10
+#define UARTn_BAUDDIV_MASK GENMASK(20, 0)
+
+/*
+ * Helpers to make typical enable/disable operations more readable.
+ */
+#define UARTn_CTRL_TX_GRP (UARTn_CTRL_TX_ENABLE |\
+ UARTn_CTRL_TX_INT_ENABLE |\
+ UARTn_CTRL_TX_OVERRUN_INT_ENABLE)
+
+#define UARTn_CTRL_RX_GRP (UARTn_CTRL_RX_ENABLE |\
+ UARTn_CTRL_RX_INT_ENABLE |\
+ UARTn_CTRL_RX_OVERRUN_INT_ENABLE)
+
+#define MPS2_MAX_PORTS 3
+
+struct mps2_uart_port {
+ struct uart_port port;
+ struct clk *clk;
+ unsigned int tx_irq;
+ unsigned int rx_irq;
+};
+
+static inline struct mps2_uart_port *to_mps2_port(struct uart_port *port)
+{
+ return container_of(port, struct mps2_uart_port, port);
+}
+
+static void mps2_uart_write8(struct uart_port *port, u8 val, unsigned off)
+{
+ struct mps2_uart_port *mps_port = to_mps2_port(port);
+
+ writeb(val, mps_port->port.membase + off);
+}
+
+static u8 mps2_uart_read8(struct uart_port *port, unsigned off)
+{
+ struct mps2_uart_port *mps_port = to_mps2_port(port);
+
+ return readb(mps_port->port.membase + off);
+}
+
+static void mps2_uart_write32(struct uart_port *port, u32 val, unsigned off)
+{
+ struct mps2_uart_port *mps_port = to_mps2_port(port);
+
+ writel_relaxed(val, mps_port->port.membase + off);
+}
+
+static unsigned int mps2_uart_tx_empty(struct uart_port *port)
+{
+ u8 status = mps2_uart_read8(port, UARTn_STATE);
+
+ return (status & UARTn_STATE_TX_FULL) ? 0 : TIOCSER_TEMT;
+}
+
+static void mps2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int mps2_uart_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR;
+}
+
+static void mps2_uart_stop_tx(struct uart_port *port)
+{
+ u8 control = mps2_uart_read8(port, UARTn_CTRL);
+
+ control &= ~UARTn_CTRL_TX_GRP;
+
+ mps2_uart_write8(port, control, UARTn_CTRL);
+}
+
+static void mps2_uart_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+
+ while (!(mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL)) {
+ if (port->x_char) {
+ mps2_uart_write8(port, port->x_char, UARTn_DATA);
+ port->x_char = 0;
+ port->icount.tx++;
+ continue;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ break;
+
+ mps2_uart_write8(port, xmit->buf[xmit->tail], UARTn_DATA);
+ xmit->tail = (xmit->tail + 1) % UART_XMIT_SIZE;
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ mps2_uart_stop_tx(port);
+}
+
+static void mps2_uart_start_tx(struct uart_port *port)
+{
+ u8 control = mps2_uart_read8(port, UARTn_CTRL);
+
+ control |= UARTn_CTRL_TX_GRP;
+
+ mps2_uart_write8(port, control, UARTn_CTRL);
+ mps2_uart_tx_chars(port);
+}
+
+static void mps2_uart_stop_rx(struct uart_port *port)
+{
+ u8 control = mps2_uart_read8(port, UARTn_CTRL);
+
+ control &= ~UARTn_CTRL_RX_GRP;
+
+ mps2_uart_write8(port, control, UARTn_CTRL);
+}
+
+static void mps2_uart_break_ctl(struct uart_port *port, int ctl)
+{
+}
+
+static void mps2_uart_rx_chars(struct uart_port *port)
+{
+ struct tty_port *tport = &port->state->port;
+
+ while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_RX_FULL) {
+ u8 rxdata = mps2_uart_read8(port, UARTn_DATA);
+
+ port->icount.rx++;
+ tty_insert_flip_char(&port->state->port, rxdata, TTY_NORMAL);
+ }
+
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(tport);
+ spin_lock(&port->lock);
+}
+
+static irqreturn_t mps2_uart_rxirq(int irq, void *data)
+{
+
+ struct uart_port *port = data;
+ u8 irqflag = mps2_uart_read8(port, UARTn_INT);
+
+ if (unlikely(!(irqflag & UARTn_INT_RX)))
+ return IRQ_NONE;
+
+ spin_lock(&port->lock);
+
+ mps2_uart_write8(port, UARTn_INT_RX, UARTn_INT);
+ mps2_uart_rx_chars(port);
+
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mps2_uart_txirq(int irq, void *data)
+{
+ struct uart_port *port = data;
+ u8 irqflag = mps2_uart_read8(port, UARTn_INT);
+
+ if (unlikely(!(irqflag & UARTn_INT_TX)))
+ return IRQ_NONE;
+
+ mps2_uart_write8(port, UARTn_INT_TX, UARTn_INT);
+ mps2_uart_tx_chars(port);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mps2_uart_oerrirq(int irq, void *data)
+{
+ irqreturn_t handled = IRQ_NONE;
+ struct uart_port *port = data;
+ u8 irqflag = mps2_uart_read8(port, UARTn_INT);
+
+ spin_lock(&port->lock);
+
+ if (irqflag & UARTn_INT_RX_OVERRUN) {
+ struct tty_port *tport = &port->state->port;
+
+ mps2_uart_write8(port, UARTn_INT_RX_OVERRUN, UARTn_INT);
+ tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+ port->icount.overrun++;
+ handled = IRQ_HANDLED;
+ }
+
+ /*
+ * It's never been seen in practice and it never *should* happen since
+ * we check if there is enough room in TX buffer before sending data.
+ * So we keep this check in case something suspicious has happened.
+ */
+ if (irqflag & UARTn_INT_TX_OVERRUN) {
+ mps2_uart_write8(port, UARTn_INT_TX_OVERRUN, UARTn_INT);
+ dev_warn(port->dev, "unexpected overrun interrupt\n");
+ handled = IRQ_HANDLED;
+ }
+
+ spin_unlock(&port->lock);
+
+ return handled;
+}
+
+static int mps2_uart_startup(struct uart_port *port)
+{
+ struct mps2_uart_port *mps_port = to_mps2_port(port);
+ u8 control = mps2_uart_read8(port, UARTn_CTRL);
+ int ret;
+
+ control &= ~(UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP);
+
+ mps2_uart_write8(port, control, UARTn_CTRL);
+
+ ret = request_irq(mps_port->rx_irq, mps2_uart_rxirq, 0,
+ MAKE_NAME(-rx), mps_port);
+ if (ret) {
+ dev_err(port->dev, "failed to register rxirq (%d)\n", ret);
+ goto err_no_rxirq;
+ }
+
+ ret = request_irq(mps_port->tx_irq, mps2_uart_txirq, 0,
+ MAKE_NAME(-tx), mps_port);
+ if (ret) {
+ dev_err(port->dev, "failed to register txirq (%d)\n", ret);
+ goto err_no_txirq;
+ }
+
+ ret = request_irq(port->irq, mps2_uart_oerrirq, IRQF_SHARED,
+ MAKE_NAME(-overrun), mps_port);
+
+ if (ret) {
+ dev_err(port->dev, "failed to register oerrirq (%d)\n", ret);
+ } else {
+ control |= UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP;
+
+ mps2_uart_write8(port, control, UARTn_CTRL);
+
+ return 0;
+ }
+
+ free_irq(mps_port->tx_irq, mps_port);
+err_no_txirq:
+ free_irq(mps_port->rx_irq, mps_port);
+err_no_rxirq:
+ return ret;
+}
+
+static void mps2_uart_shutdown(struct uart_port *port)
+{
+ struct mps2_uart_port *mps_port = to_mps2_port(port);
+ u8 control = mps2_uart_read8(port, UARTn_CTRL);
+
+ control &= ~(UARTn_CTRL_RX_GRP| UARTn_CTRL_TX_GRP);
+
+ mps2_uart_write8(port, control, UARTn_CTRL);
+
+ free_irq(mps_port->rx_irq, mps_port);
+ free_irq(mps_port->tx_irq, mps_port);
+ free_irq(port->irq, mps_port);
+}
+
+static void mps2_uart_set_termios(struct uart_port *port,
+ struct ktermios *new, struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned int baud, bauddiv;
+
+ new->c_cflag &= ~(CRTSCTS | CMSPAR);
+ new->c_cflag &= ~CSIZE;
+ new->c_cflag |= CS8;
+ new->c_cflag &= ~PARENB;
+ new->c_cflag &= ~CSTOPB;
+
+ baud = uart_get_baud_rate(port, new, old,
+ DIV_ROUND_CLOSEST(port->uartclk, UARTn_BAUDDIV_MASK),
+ DIV_ROUND_CLOSEST(port->uartclk, 16));
+
+ bauddiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ uart_update_timeout(port, new->c_cflag, baud);
+ mps2_uart_write32(port, bauddiv, UARTn_BAUDDIV);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *mps2_uart_type(struct uart_port *port)
+{
+ return (port->type == PORT_MPS2UART) ? DRIVER_NAME : NULL;
+}
+
+static void mps2_uart_release_port(struct uart_port *port)
+{
+}
+
+static int mps2_uart_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void mps2_uart_config_port(struct uart_port *port, int type)
+{
+ if (type & UART_CONFIG_TYPE && !mps2_uart_request_port(port))
+ port->type = PORT_MPS2UART;
+}
+
+static int mps2_uart_verify_port(struct uart_port *port, struct serial_struct *serinfo)
+{
+ return -EINVAL;
+}
+
+static const struct uart_ops mps2_uart_pops = {
+ .tx_empty = mps2_uart_tx_empty,
+ .set_mctrl = mps2_uart_set_mctrl,
+ .get_mctrl = mps2_uart_get_mctrl,
+ .stop_tx = mps2_uart_stop_tx,
+ .start_tx = mps2_uart_start_tx,
+ .stop_rx = mps2_uart_stop_rx,
+ .break_ctl = mps2_uart_break_ctl,
+ .startup = mps2_uart_startup,
+ .shutdown = mps2_uart_shutdown,
+ .set_termios = mps2_uart_set_termios,
+ .type = mps2_uart_type,
+ .release_port = mps2_uart_release_port,
+ .request_port = mps2_uart_request_port,
+ .config_port = mps2_uart_config_port,
+ .verify_port = mps2_uart_verify_port,
+};
+
+static struct mps2_uart_port mps2_uart_ports[MPS2_MAX_PORTS];
+
+#ifdef CONFIG_SERIAL_MPS2_UART_CONSOLE
+static void mps2_uart_console_putchar(struct uart_port *port, int ch)
+{
+ while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL)
+ cpu_relax();
+
+ mps2_uart_write8(port, ch, UARTn_DATA);
+}
+
+static void mps2_uart_console_write(struct console *co, const char *s, unsigned int cnt)
+{
+ struct uart_port *port = &mps2_uart_ports[co->index].port;
+
+ uart_console_write(port, s, cnt, mps2_uart_console_putchar);
+}
+
+static int mps2_uart_console_setup(struct console *co, char *options)
+{
+ struct mps2_uart_port *mps_port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= MPS2_MAX_PORTS)
+ return -ENODEV;
+
+ mps_port = &mps2_uart_ports[co->index];
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&mps_port->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver mps2_uart_driver;
+
+static struct console mps2_uart_console = {
+ .name = SERIAL_NAME,
+ .device = uart_console_device,
+ .write = mps2_uart_console_write,
+ .setup = mps2_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &mps2_uart_driver,
+};
+
+#define MPS2_SERIAL_CONSOLE (&mps2_uart_console)
+
+#else
+#define MPS2_SERIAL_CONSOLE NULL
+#endif
+
+static struct uart_driver mps2_uart_driver = {
+ .driver_name = DRIVER_NAME,
+ .dev_name = SERIAL_NAME,
+ .nr = MPS2_MAX_PORTS,
+ .cons = MPS2_SERIAL_CONSOLE,
+};
+
+static struct mps2_uart_port *mps2_of_get_port(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int id;
+
+ if (!np)
+ return NULL;
+
+ id = of_alias_get_id(np, "serial");
+ if (id < 0)
+ id = 0;
+
+ if (WARN_ON(id >= MPS2_MAX_PORTS))
+ return NULL;
+
+ mps2_uart_ports[id].port.line = id;
+ return &mps2_uart_ports[id];
+}
+
+static int mps2_init_port(struct mps2_uart_port *mps_port,
+ struct platform_device *pdev)
+{
+ int ret;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mps_port->port.membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mps_port->port.membase))
+ return PTR_ERR(mps_port->port.membase);
+
+ mps_port->port.mapbase = res->start;
+ mps_port->port.mapsize = resource_size(res);
+
+ mps_port->rx_irq = platform_get_irq(pdev, 0);
+ mps_port->tx_irq = platform_get_irq(pdev, 1);
+ mps_port->port.irq = platform_get_irq(pdev, 2);
+
+ mps_port->port.iotype = UPIO_MEM;
+ mps_port->port.flags = UPF_BOOT_AUTOCONF;
+ mps_port->port.fifosize = 1;
+ mps_port->port.ops = &mps2_uart_pops;
+ mps_port->port.dev = &pdev->dev;
+
+ mps_port->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(mps_port->clk))
+ return PTR_ERR(mps_port->clk);
+
+ ret = clk_prepare_enable(mps_port->clk);
+ if (ret)
+ return ret;
+
+ mps_port->port.uartclk = clk_get_rate(mps_port->clk);
+
+ clk_disable_unprepare(mps_port->clk);
+
+ return ret;
+}
+
+static int mps2_serial_probe(struct platform_device *pdev)
+{
+ struct mps2_uart_port *mps_port;
+ int ret;
+
+ mps_port = mps2_of_get_port(pdev);
+ if (!mps_port)
+ return -ENODEV;
+
+ ret = mps2_init_port(mps_port, pdev);
+ if (ret)
+ return ret;
+
+ ret = uart_add_one_port(&mps2_uart_driver, &mps_port->port);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, mps_port);
+
+ return 0;
+}
+
+static int mps2_serial_remove(struct platform_device *pdev)
+{
+ struct mps2_uart_port *mps_port = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&mps2_uart_driver, &mps_port->port);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mps2_match[] = {
+ { .compatible = "arm,mps2-uart", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mps2_match);
+#endif
+
+static struct platform_driver mps2_serial_driver = {
+ .probe = mps2_serial_probe,
+ .remove = mps2_serial_remove,
+
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(mps2_match),
+ },
+};
+
+static int __init mps2_uart_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&mps2_uart_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&mps2_serial_driver);
+ if (ret)
+ uart_unregister_driver(&mps2_uart_driver);
+
+ pr_info("MPS2 UART driver initialized\n");
+
+ return ret;
+}
+module_init(mps2_uart_init);
+
+static void __exit mps2_uart_exit(void)
+{
+ platform_driver_unregister(&mps2_serial_driver);
+ uart_unregister_driver(&mps2_uart_driver);
+}
+module_exit(mps2_uart_exit);
+
+MODULE_AUTHOR("Vladimir Murzin <vladimir.murzin@arm.com>");
+MODULE_DESCRIPTION("MPS2 UART driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 3e5d757..1fa57bb 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -261,4 +261,7 @@
/* STM32 USART */
#define PORT_STM32 113
+/* MPS2 UART */
+#define PORT_MPS2UART 114
+
#endif /* _UAPILINUX_SERIAL_CORE_H */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 05/10] serial: mps2-uart: add support for early console
2016-02-02 11:39 [PATCH v2 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
` (3 preceding siblings ...)
2016-02-02 11:39 ` [PATCH v2 04/10] serial: mps2-uart: add MPS2 UART driver Vladimir Murzin
@ 2016-02-02 11:39 ` Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 06/10] ARM: mps2: introduce MPS2 platform Vladimir Murzin
` (4 subsequent siblings)
9 siblings, 0 replies; 18+ messages in thread
From: Vladimir Murzin @ 2016-02-02 11:39 UTC (permalink / raw)
To: arnd, linux, gregkh, daniel.lezcano, tglx, u.kleine-koenig
Cc: mark.rutland, devicetree, pawel.moll, ijc+devicetree, linux-api,
linux-kernel, andy.shevchenko, robh+dt, linux-serial, galak,
jslaby, linux-arm-kernel
This adds support early console for MPS2 UART which can be enabled via
earlycon=mps2,0x40004000
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
---
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/mps2-uart.c | 30 ++++++++++++++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 3a248be..4ed6e51 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1454,6 +1454,7 @@ config SERIAL_MPS2_UART_CONSOLE
bool "MPS2 UART console support"
depends on SERIAL_MPS2_UART
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
config SERIAL_MPS2_UART
bool "MPS2 UART port"
diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
index 4d113ec..530dcab 100644
--- a/drivers/tty/serial/mps2-uart.c
+++ b/drivers/tty/serial/mps2-uart.c
@@ -435,6 +435,36 @@ static struct console mps2_uart_console = {
#define MPS2_SERIAL_CONSOLE (&mps2_uart_console)
+static void mps2_early_putchar(struct uart_port *port, int ch)
+{
+
+ while (readb(port->membase + UARTn_STATE) & UARTn_STATE_TX_FULL)
+ cpu_relax();
+
+ writeb((unsigned char)ch, port->membase + UARTn_DATA);
+}
+
+
+static void mps2_early_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, mps2_early_putchar);
+}
+
+static int __init mps2_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = mps2_early_write;
+
+ return 0;
+}
+EARLYCON_DECLARE(mps2, mps2_early_console_setup);
+OF_EARLYCON_DECLARE(mps2, "arm,mps2-uart", mps2_early_console_setup);
+
#else
#define MPS2_SERIAL_CONSOLE NULL
#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 06/10] ARM: mps2: introduce MPS2 platform
2016-02-02 11:39 [PATCH v2 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
` (4 preceding siblings ...)
2016-02-02 11:39 ` [PATCH v2 05/10] serial: mps2-uart: add support for early console Vladimir Murzin
@ 2016-02-02 11:39 ` Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 07/10] ARM: mps2: add low-level debug support Vladimir Murzin
` (3 subsequent siblings)
9 siblings, 0 replies; 18+ messages in thread
From: Vladimir Murzin @ 2016-02-02 11:39 UTC (permalink / raw)
To: arnd, linux, gregkh, daniel.lezcano, tglx, u.kleine-koenig
Cc: andy.shevchenko, mark.rutland, pawel.moll, ijc+devicetree, galak,
jslaby, robh+dt, devicetree, linux-serial, linux-api,
linux-arm-kernel, linux-kernel
The Cortex-M Prototyping System (or V2M-MPS2) is designed for
prototyping and evaluation Cortex-M family of processors including the
latest Cortex-M7
It comes with a range of useful peripherals including 8MB single cycle
SRAM, 16MB PSRAM, Ethernet, QSVGA touch screen panel, 4bit RGB VGA
connector, Audio, SPI and GPIO.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
---
arch/arm/Kconfig | 8 ++++++++
arch/arm/Makefile | 1 +
arch/arm/mach-mps2/Makefile | 1 +
arch/arm/mach-mps2/Makefile.boot | 3 +++
arch/arm/mach-mps2/dtmachine.c | 21 +++++++++++++++++++++
5 files changed, 34 insertions(+)
create mode 100644 arch/arm/mach-mps2/Makefile
create mode 100644 arch/arm/mach-mps2/Makefile.boot
create mode 100644 arch/arm/mach-mps2/dtmachine.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4f799e5..48fa6c4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -883,6 +883,14 @@ config ARCH_STM32
help
Support for STMicroelectronics STM32 processors.
+config ARCH_MPS2
+ bool "ARM MPS2 paltform"
+ depends on ARM_SINGLE_ARMV7M
+ select ARM_AMBA
+ select CLKSRC_MPS2
+ help
+ Support for ARM MPS2 Cortex-M platform.
+
# Definitions to make life easier
config ARCH_ACORN
bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index fe25410..8cd9ec1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -182,6 +182,7 @@ machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MESON) += meson
machine-$(CONFIG_ARCH_MMP) += mmp
+machine-$(CONFIG_ARCH_MPS2) += mps2
machine-$(CONFIG_ARCH_MOXART) += moxart
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MVEBU) += mvebu
diff --git a/arch/arm/mach-mps2/Makefile b/arch/arm/mach-mps2/Makefile
new file mode 100644
index 0000000..3a74af7
--- /dev/null
+++ b/arch/arm/mach-mps2/Makefile
@@ -0,0 +1 @@
+obj-y += dtmachine.o
diff --git a/arch/arm/mach-mps2/Makefile.boot b/arch/arm/mach-mps2/Makefile.boot
new file mode 100644
index 0000000..eacfc3f
--- /dev/null
+++ b/arch/arm/mach-mps2/Makefile.boot
@@ -0,0 +1,3 @@
+# Empty file waiting for deletion once Makefile.boot isn't needed any more.
+# Patch waits for application at
+# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-mps2/dtmachine.c b/arch/arm/mach-mps2/dtmachine.c
new file mode 100644
index 0000000..e7ad9c2
--- /dev/null
+++ b/arch/arm/mach-mps2/dtmachine.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const mps2_compat[] __initconst = {
+ "arm,mps2",
+ NULL
+};
+
+DT_MACHINE_START(MPS2DT, "MPS2 (Device Tree Support)")
+ .dt_compat = mps2_compat,
+MACHINE_END
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 07/10] ARM: mps2: add low-level debug support
2016-02-02 11:39 [PATCH v2 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
` (5 preceding siblings ...)
2016-02-02 11:39 ` [PATCH v2 06/10] ARM: mps2: introduce MPS2 platform Vladimir Murzin
@ 2016-02-02 11:39 ` Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 08/10] ARM: configs: add MPS2 defconfig Vladimir Murzin
` (2 subsequent siblings)
9 siblings, 0 replies; 18+ messages in thread
From: Vladimir Murzin @ 2016-02-02 11:39 UTC (permalink / raw)
To: arnd, linux, gregkh, daniel.lezcano, tglx, u.kleine-koenig
Cc: andy.shevchenko, mark.rutland, pawel.moll, ijc+devicetree, galak,
jslaby, robh+dt, devicetree, linux-serial, linux-api,
linux-arm-kernel, linux-kernel
Add low-level debug support for MPS2, so that earlyprintk can be enabled
for debugging early boot issues.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
---
arch/arm/Kconfig.debug | 12 +++++++++++-
arch/arm/include/debug/mps2.S | 27 +++++++++++++++++++++++++++
2 files changed, 38 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/include/debug/mps2.S
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c6b6175..fcd2e15 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -485,6 +485,13 @@ choice
Say Y here if you want kernel low-level debugging support
on MMP UART3.
+ config DEBUG_MPS2_UART
+ bool "Kernel low-level debugging message via MPS2 UART0"
+ depends on ARCH_MPS2
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MPS2 based platforms.
+
config DEBUG_MVEBU_UART0
bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
depends on ARCH_MVEBU
@@ -1415,6 +1422,7 @@ config DEBUG_LL_INCLUDE
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
+ default "debug/mps2.S" if DEBUG_MPS2_UART
default "mach/debug-macro.S"
# Compatibility options for PL01x
@@ -1463,6 +1471,7 @@ config DEBUG_UART_PHYS
default 0x20201000 if DEBUG_BCM2835
default 0x3f201000 if DEBUG_BCM2836
default 0x3e000000 if DEBUG_BCM_KONA_UART
+ default 0x40004000 if DEBUG_MPS2_UART
default 0x4000e400 if DEBUG_LL_UART_EFM32
default 0x40081000 if DEBUG_LPC18XX_UART0
default 0x40090000 if DEBUG_LPC32XX
@@ -1539,7 +1548,8 @@ config DEBUG_UART_PHYS
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
- DEBUG_AT91_UART
+ DEBUG_AT91_UART || \
+ DEBUG_MPS2_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
diff --git a/arch/arm/include/debug/mps2.S b/arch/arm/include/debug/mps2.S
new file mode 100644
index 0000000..0ced0ce
--- /dev/null
+++ b/arch/arm/include/debug/mps2.S
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ .macro addruart, rp, tmp1, tmp2
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS
+ .endm
+
+ .macro senduart, rd, rx
+ strb \rd, [\rx] @ Data Register
+ .endm
+
+ .macro busyuart, rd, rx
+1001: ldrb \rd, [\rx, #0x4] @ State Register
+ tst \rd, #1 @ busy
+ bne 1001b @ wait until transmit done
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 08/10] ARM: configs: add MPS2 defconfig
2016-02-02 11:39 [PATCH v2 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
` (6 preceding siblings ...)
2016-02-02 11:39 ` [PATCH v2 07/10] ARM: mps2: add low-level debug support Vladimir Murzin
@ 2016-02-02 11:39 ` Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 09/10] ARM: dts: introduce MPS2 AN385/AN386 Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 10/10] ARM: dts: introduce MPS2 AN399/AN400 Vladimir Murzin
9 siblings, 0 replies; 18+ messages in thread
From: Vladimir Murzin @ 2016-02-02 11:39 UTC (permalink / raw)
To: arnd, linux, gregkh, daniel.lezcano, tglx, u.kleine-koenig
Cc: andy.shevchenko, mark.rutland, pawel.moll, ijc+devicetree, galak,
jslaby, robh+dt, devicetree, linux-serial, linux-api,
linux-arm-kernel, linux-kernel
This patch adds a new config for MPS2 platform.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
---
arch/arm/configs/mps2_defconfig | 112 +++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
create mode 100644 arch/arm/configs/mps2_defconfig
diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig
new file mode 100644
index 0000000..c36c519
--- /dev/null
+++ b/arch/arm/configs/mps2_defconfig
@@ -0,0 +1,112 @@
+# CONFIG_USELIB is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_UID16 is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_BLOCK is not set
+# CONFIG_MMU is not set
+CONFIG_ARM_SINGLE_ARMV7M=y
+CONFIG_ARCH_MPS2=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x21000000
+CONFIG_DRAM_SIZE=0x1000000
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_COREDUMP is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CORE is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_MPS2_UART_CONSOLE=y
+CONFIG_SERIAL_MPS2_UART=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_ARM_TIMER_SP804=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_MEMTEST=y
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 09/10] ARM: dts: introduce MPS2 AN385/AN386
2016-02-02 11:39 [PATCH v2 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
` (7 preceding siblings ...)
2016-02-02 11:39 ` [PATCH v2 08/10] ARM: configs: add MPS2 defconfig Vladimir Murzin
@ 2016-02-02 11:39 ` Vladimir Murzin
2016-02-02 11:39 ` [PATCH v2 10/10] ARM: dts: introduce MPS2 AN399/AN400 Vladimir Murzin
9 siblings, 0 replies; 18+ messages in thread
From: Vladimir Murzin @ 2016-02-02 11:39 UTC (permalink / raw)
To: arnd, linux, gregkh, daniel.lezcano, tglx, u.kleine-koenig
Cc: andy.shevchenko, mark.rutland, pawel.moll, ijc+devicetree, galak,
jslaby, robh+dt, devicetree, linux-serial, linux-api,
linux-arm-kernel, linux-kernel
Application Notes 385 and 386 shares the same memory map and features
except the CPU is used. AN385 is supplied with Cortex-M3 CPU and AN386
is supplied with Cortex-M4.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/mps2-an385.dts | 90 +++++++++++++++
arch/arm/boot/dts/mps2.dtsi | 227 ++++++++++++++++++++++++++++++++++++++
3 files changed, 318 insertions(+)
create mode 100644 arch/arm/boot/dts/mps2-an385.dts
create mode 100644 arch/arm/boot/dts/mps2.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a4a6d70..96418d2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -245,6 +245,7 @@ dtb-$(CONFIG_ARCH_MMP) += \
dtb-$(CONFIG_MACH_MESON8B) += \
meson8b-mxq.dtb \
meson8b-odroidc1.dtb
+dtb-$(CONFIG_ARCH_MPS2) += mps2-an385.dtb
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
dtb-$(CONFIG_SOC_IMX1) += \
diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/mps2-an385.dts
new file mode 100644
index 0000000..ddb03d3
--- /dev/null
+++ b/arch/arm/boot/dts/mps2-an385.dts
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "mps2.dtsi"
+
+/ {
+ model = "ARM MPS2 Application Note 385/386";
+ compatible = "arm,mps2";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ bootargs = "init=/sbin/init earlycon";
+ stdout-path = "serial0:9600n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x21000000 0x1000000>;
+ };
+
+ ethernet@40200000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x40200000 0x10000>;
+ interrupts = <13>;
+ interrupt-parent = <&nvic>;
+ smsc,irq-active-high;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&timer0 {
+ status = "okay";
+};
+
+&timer1 {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
new file mode 100644
index 0000000..5d2c539
--- /dev/null
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+ oscclk0: clk-osc0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ oscclk1: clk-osc1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ oscclk2: clk-osc2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ cfgclk: clk-cfg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <5000000>;
+ };
+
+ spicfgclk: clk-spicfg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <75000000>;
+ };
+
+ sysclk: clk-sys {
+ compatible = "fixed-factor-clock";
+ clocks = <&oscclk0>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ audmclk: clk-audm {
+ compatible = "fixed-factor-clock";
+ clocks = <&oscclk1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ audsclk: clk-auds {
+ compatible = "fixed-factor-clock";
+ clocks = <&oscclk1>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ };
+
+ spiclcd: clk-cpiclcd {
+ compatible = "fixed-factor-clock";
+ clocks = <&oscclk0>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ spicon: clk-spicon {
+ compatible = "fixed-factor-clock";
+ clocks = <&oscclk0>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ i2cclcd: clk-i2cclcd {
+ compatible = "fixed-factor-clock";
+ clocks = <&oscclk0>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ i2caud: clk-i2caud {
+ compatible = "fixed-factor-clock";
+ clocks = <&oscclk0>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40000000 0x10000>;
+
+ timer0: mps2-timer0@0 {
+ compatible = "arm,mps2-timer";
+ reg = <0x0 0x1000>;
+ interrupts = <8>;
+ clocks = <&sysclk>;
+ status = "disabled";
+ };
+
+ timer1: mps2-timer1@1000 {
+ compatible = "arm,mps2-timer";
+ reg = <0x1000 0x1000>;
+ interrupts = <9>;
+ clocks = <&sysclk>;
+ status = "disabled";
+ };
+
+ timer2: dual-timer@2000 {
+ compatible = "arm,sp804";
+ reg = <0x2000 0x1000>;
+ clocks = <&sysclk>;
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+
+ uart0: serial@4000 {
+ compatible = "arm,mps2-uart";
+ reg = <0x4000 0x1000>;
+ interrupts = <0 1 12>;
+ clocks = <&sysclk>;
+ status = "disabled";
+ };
+
+ uart1: serial@5000 {
+ compatible = "arm,mps2-uart";
+ reg = <0x5000 0x1000>;
+ interrupts = <2 3 12>;
+ clocks = <&sysclk>;
+ status = "disabled";
+ };
+
+ uart2: serial@6000 {
+ compatible = "arm,mps2-uart";
+ reg = <0x6000 0x1000>;
+ interrupts = <4 5 12>;
+ clocks = <&sysclk>;
+ status = "disabled";
+ };
+
+ wdt: watchdog@8000 {
+ compatible = "arm,sp805", "arm,primecell";
+ arm,primecell-periphid = <0x00141805>;
+ reg = <0x8000 0x1000>;
+ interrupts = <0>;
+ clocks = <&sysclk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ };
+
+ fpgaio {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x40028000 0x10>;
+
+ led@0 {
+ compatible = "register-bit-led";
+ offset = <0x0>;
+ mask = <0x01>;
+ label = "userled:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
+ led@1 {
+ compatible = "register-bit-led";
+ offset = <0x0>;
+ mask = <0x02>;
+ label = "userled:1";
+ linux,default-trigger = "usr";
+ default-state = "off";
+ };
+ };
+ };
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 10/10] ARM: dts: introduce MPS2 AN399/AN400
2016-02-02 11:39 [PATCH v2 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
` (8 preceding siblings ...)
2016-02-02 11:39 ` [PATCH v2 09/10] ARM: dts: introduce MPS2 AN385/AN386 Vladimir Murzin
@ 2016-02-02 11:39 ` Vladimir Murzin
9 siblings, 0 replies; 18+ messages in thread
From: Vladimir Murzin @ 2016-02-02 11:39 UTC (permalink / raw)
To: arnd, linux, gregkh, daniel.lezcano, tglx, u.kleine-koenig
Cc: andy.shevchenko, mark.rutland, pawel.moll, ijc+devicetree, galak,
jslaby, robh+dt, devicetree, linux-serial, linux-api,
linux-arm-kernel, linux-kernel
Application Notes 399 and 400 shares the same memory map and
features. Both are shipped with Cortex-M7 and have the same peripheral
as AN385/AN386, but with different location of PSRAM and Ethernet
controller.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
---
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/mps2-an399.dts | 92 ++++++++++++++++++++++++++++++++++++++
2 files changed, 95 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/mps2-an399.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 96418d2..ad5622b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -245,7 +245,9 @@ dtb-$(CONFIG_ARCH_MMP) += \
dtb-$(CONFIG_MACH_MESON8B) += \
meson8b-mxq.dtb \
meson8b-odroidc1.dtb
-dtb-$(CONFIG_ARCH_MPS2) += mps2-an385.dtb
+dtb-$(CONFIG_ARCH_MPS2) += \
+ mps2-an385.dtb \
+ mps2-an399.dtb
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
dtb-$(CONFIG_SOC_IMX1) += \
diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/mps2-an399.dts
new file mode 100644
index 0000000..e591d75
--- /dev/null
+++ b/arch/arm/boot/dts/mps2-an399.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "mps2.dtsi"
+
+/ {
+ model = "ARM MPS2 Application Note 399/400";
+ compatible = "arm,mps2";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ bootargs = "rdinit=/sbin/init earlycon";
+ stdout-path = "serial0:9600n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x1000000>;
+ };
+
+
+ ethernet@a0000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0xa0000000 0x10000>;
+ interrupts = <13>;
+ interrupt-parent = <&nvic>;
+ smsc,irq-active-high;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+
+&timer0 {
+ status = "okay";
+};
+
+&timer1 {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread