From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: Re: [PATCH] ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB Date: Mon, 8 Feb 2016 16:43:29 +0100 Message-ID: <56B8B7A1.5020800@redhat.com> References: <1454945387-29424-1-git-send-email-codekipper@gmail.com> Reply-To: hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Return-path: In-Reply-To: <1454945387-29424-1-git-send-email-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org Hi, On 08-02-16 16:29, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote: > From: Marcus Cooper > > Enable the otg/drc usb controller on the Olimex A20 EVB. Does the A20 EVB not have some form of Vbus detect for the OTG port hooked up ? That does not sound right. Please double check. Regards, Hans > > Signed-off-by: Marcus Cooper > --- > arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts > index c3c626b..93bbf26 100644 > --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts > +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts > @@ -198,6 +198,10 @@ > status = "okay"; > }; > > +&otg_sram { > + status = "okay"; > +}; > + > &pio { > ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { > allwinner,pins = "PC3"; > @@ -219,6 +223,13 @@ > allwinner,drive = ; > allwinner,pull = ; > }; > + > + usb0_id_detect_pin: usb0_id_detect_pin@0 { > + allwinner,pins = "PH4"; > + allwinner,function = "gpio_in"; > + allwinner,drive = ; > + allwinner,pull = ; > + }; > }; > > ®_ahci_5v { > @@ -254,6 +265,10 @@ > regulator-name = "avcc"; > }; > > +®_usb0_vbus { > + status = "okay"; > +}; > + > ®_usb1_vbus { > status = "okay"; > }; > @@ -268,7 +283,16 @@ > status = "okay"; > }; > > +&usb_otg { > + dr_mode = "otg"; > + status = "okay"; > +}; > + > &usbphy { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb0_id_detect_pin>; > + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ > + usb0_vbus-supply = <®_usb0_vbus>; > usb1_vbus-supply = <®_usb1_vbus>; > usb2_vbus-supply = <®_usb2_vbus>; > status = "okay"; >