Re: [PATCH] ARM: dts: sun7i: Enable USB DRC on Itead Ibox

[Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]

Hi,

On 08-02-16 17:56, Code Kipper wrote:
> On 8 February 2016 at 17:14, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
>> Hi,
>>
>> On 08-02-16 16:59, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
>>>
>>> From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>>
>>> Enable the otg/drc usb controller on the Itead Ibox device.
>>>
>>> Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>
>>
>> Same remark as with your Olimex A20 EVB board patch, please
>> also provide a vbus detect pin setting. If for some reason the
>> VBus detect is not wired up, or not working properly, please mention
>> this explicitly in the commit message.
> Hi Hans,
> I've added vbus detect and it no longer works. It's mentioned that the
> Itead Ibox is similar to the Cubieboard 2 which also doesn't include
> the detect. I can see now in the commit that it states "Note this
> board has the otg-vbus connected directly to the 5v-dcc of the board,
> so there is no vbus0 regulator, nor vbus0-det.", I will add this to
> the commit message and try and dig out a schematic to confirm.

Ok, thanks for looking into this.

Regards,

Hans