From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Kim, Milo" Subject: Re: [PATCH v2 2/4] regulator: lp872x: Add enable GPIO pin support Date: Fri, 12 Feb 2016 09:14:37 +0900 Message-ID: <56BD23ED.8010207@ti.com> References: <1454697741-8687-1-git-send-email-contact@paulk.fr> <1454697741-8687-3-git-send-email-contact@paulk.fr> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1454697741-8687-3-git-send-email-contact-W9ppeneeCTY@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Paul Kocialkowski Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , =?UTF-8?Q?Beno=c3=aet_Cousson?= , Tony Lindgren , Liam Girdwood , Mark Brown , Javier Martinez Canillas , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Paul, Thanks for the patch. Please see my comments below. On 2/6/2016 3:42 AM, Paul Kocialkowski wrote: > LP872x regulators are made active via the EN pin, which might be hooked to a > GPIO. This adds support for driving the GPIO high when the driver is in use. > > Signed-off-by: Paul Kocialkowski > --- > .../devicetree/bindings/regulator/lp872x.txt | 1 + > drivers/regulator/lp872x.c | 34 ++++++++++++++++++++++ > include/linux/regulator/lp872x.h | 5 ++++ > 3 files changed, 40 insertions(+) > > diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt > index 7818318..ca58a68 100644 > --- a/Documentation/devicetree/bindings/regulator/lp872x.txt > +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt > @@ -28,6 +28,7 @@ Optional properties: > - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. > - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. > - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH. > + - enable-gpios: GPIO specifier for EN pin control of LP872x devices. > > Sub nodes for regulator_init_data > LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck) > diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c > index 21c49d8..3899211 100644 > --- a/drivers/regulator/lp872x.c > +++ b/drivers/regulator/lp872x.c > @@ -15,6 +15,7 @@ > #include > #include > #include > +#include > #include > #include > #include > @@ -757,6 +758,33 @@ set_default_dvs_mode: > default_dvs_mode[lp->chipid]); > } > > +static int lp872x_hw_enable(struct lp872x *lp) > +{ > + int ret, gpio; > + > + if (!lp->pdata) > + return -EINVAL; > + > + gpio = lp->pdata->enable_gpio; > + if (!gpio_is_valid(gpio)) > + return 0; It seems gpio is always 0 when it starts from DT. 'enable_gpio' is updated in lp872x_config() but lp872x_hw_enable() is called first. > + > + /* Always set enable GPIO high. */ > + ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN"); > + if (ret) { > + dev_err(lp->dev, "gpio request err: %d\n", ret); > + return ret; > + } > + > + /* Each chip has a different enable delay. */ > + if (lp->chipid == LP8720) > + usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY); > + else > + usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY); > + > + return 0; > +} > + > static int lp872x_config(struct lp872x *lp) > { > struct lp872x_platform_data *pdata = lp->pdata; > @@ -875,6 +903,8 @@ static struct lp872x_platform_data > of_property_read_u8(np, "ti,dvs-state", &dvs_state); > pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW; > > + pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0); Please move this code to lp872x_populate_pdata_from_dt(). lp872x_hw_enable() is called prior to lp872x_config(), so enable_gpio should be set on parsing the DT properties. > + > if (of_get_child_count(np) == 0) > goto out; > > @@ -948,6 +978,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) > lp->chipid = id->driver_data; > i2c_set_clientdata(cl, lp); > > + ret = lp872x_hw_enable(lp); > + if (ret) > + return ret; > + > ret = lp872x_config(lp); > if (ret) > return ret; > diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h > index 132e05c..6029279 100644 > --- a/include/linux/regulator/lp872x.h > +++ b/include/linux/regulator/lp872x.h > @@ -18,6 +18,9 @@ > > #define LP872X_MAX_REGULATORS 9 > > +#define LP8720_ENABLE_DELAY 200 > +#define LP8725_ENABLE_DELAY 30000 > + > enum lp872x_regulator_id { > LP8720_ID_BASE, > LP8720_ID_LDO1 = LP8720_ID_BASE, > @@ -79,12 +82,14 @@ struct lp872x_regulator_data { > * @update_config : if LP872X_GENERAL_CFG register is updated, set true > * @regulator_data : platform regulator id and init data > * @dvs : dvs data for buck voltage control > + * @enable_gpio : gpio pin number for enable control > */ > struct lp872x_platform_data { > u8 general_config; > bool update_config; > struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS]; > struct lp872x_dvs *dvs; > + int enable_gpio; > }; > > #endif > Best regards, Milo -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html