Re: [PATCH v2] rtc: s3c: Document in binding that only s3c6410 needs a src clk

[Krzysztof Kozlowski <k.kozlowski@samsung.com>]

On 15.02.2016 23:11, Javier Martinez Canillas wrote:
> The S3C binding doc says that the RTC and RTC source clocks are required
> but the S3C driver supports different HW IP and only the s3c6410 needs a
> source clock.
> 
> Fix the binding explaining that the source clock is only needed for the
> s3c6410-rtc compatible controller.
> 
> Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> 
> ---
> Hello,
> 
> This patch depends on a previous one that was picked by Rob Herring so
> this one has to go through his tree again and not through the RTC tree
> to avoid conflicts.
> 
> Best regards,
> Javier
> 
> Changes in v2:
> - Remove the mention to a commit sha-1 that's not in mainline (Alexandre).
> - Fix typo in commit message (Alexandre).
> - Add Alexandre's Acked-by tag.
> 
>  Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof