[PATCH 2/2] bmips: add device tree example for BCM6358

[PATCH 2/2] bmips: add device tree example for BCM6358

[Álvaro Fernández Rojas]

This adds a device tree example for SFR Neufbox4 (Sercomm version), which
also serves as a real example for brcm,bcm6358-leds.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 .../devicetree/bindings/mips/brcm/soc.txt          |   2 +-
 arch/mips/bmips/Kconfig                            |   4 +
 arch/mips/boot/dts/brcm/Makefile                   |   2 +
 arch/mips/boot/dts/brcm/bcm6358.dtsi               | 111 +++++++++++++++++++++
 arch/mips/boot/dts/brcm/bcm96358nb4ser.dts         |  47 +++++++++
 5 files changed, 165 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/boot/dts/brcm/bcm6358.dtsi
 create mode 100644 arch/mips/boot/dts/brcm/bcm96358nb4ser.dts

diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt
index 7bab90c..e58a4f6 100644
--- a/Documentation/devicetree/bindings/mips/brcm/soc.txt
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt
@@ -4,7 +4,7 @@ Required properties:
 
 - compatible: "brcm,bcm3384", "brcm,bcm33843"
               "brcm,bcm3384-viper", "brcm,bcm33843-viper"
-              "brcm,bcm6328", "brcm,bcm6368",
+              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368",
               "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
               "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"
 
diff --git a/arch/mips/bmips/Kconfig b/arch/mips/bmips/Kconfig
index e2c4fd6..264328d 100644
--- a/arch/mips/bmips/Kconfig
+++ b/arch/mips/bmips/Kconfig
@@ -21,6 +21,10 @@ config DT_BCM93384WVG_VIPER
 	bool "BCM93384WVG Viper CPU (EXPERIMENTAL)"
 	select BUILTIN_DTB
 
+config DT_BCM96358NB4SER
+	bool "BCM96358NB4SER"
+	select BUILTIN_DTB
+
 config DT_BCM96368MVWG
 	bool "BCM96368MVWG"
 	select BUILTIN_DTB
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
index eabeb60..fda9d38 100644
--- a/arch/mips/boot/dts/brcm/Makefile
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_DT_BCM93384WVG)		+= bcm93384wvg.dtb
 dtb-$(CONFIG_DT_BCM93384WVG_VIPER)	+= bcm93384wvg_viper.dtb
+dtb-$(CONFIG_DT_BCM96358NB4SER)		+= bcm96358nb4ser.dtb
 dtb-$(CONFIG_DT_BCM96368MVWG)		+= bcm96368mvwg.dtb
 dtb-$(CONFIG_DT_BCM9EJTAGPRB)		+= bcm9ejtagprb.dtb
 dtb-$(CONFIG_DT_BCM97125CBMB)		+= bcm97125cbmb.dtb
@@ -14,6 +15,7 @@ dtb-$(CONFIG_DT_BCM97435SVMB)		+= bcm97435svmb.dtb
 dtb-$(CONFIG_DT_NONE)			+= \
 						bcm93384wvg.dtb		\
 						bcm93384wvg_viper.dtb	\
+						bcm96358nb4ser.dtb	\
 						bcm96368mvwg.dtb	\
 						bcm9ejtagprb.dtb	\
 						bcm97125cbmb.dtb	\
diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi
new file mode 100644
index 0000000..b2d11da
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -0,0 +1,111 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6358";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <150000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		leds0 = &leds0;
+		uart0 = &uart0;
+		uart1 = &uart1;
+	};
+
+	cpu_intc: cpu_intc {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@fffe0000 {
+			compatible = "syscon";
+			reg = <0xfffe0000 0xc>;
+		};
+
+		reboot: syscon-reboot@fffe0008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: periph_intc@fffe000c {
+			compatible = "brcm,bcm3380-l2-intc";
+			reg = <0xfffe0010 0x4 0xfffe000c 0x4>,
+			      <0xfffe003c 0x4 0xfffe0038 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		leds0: led-controller@fffe00d0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-leds";
+			reg = <0xfffe00d0 0x8>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@fffe0100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@fffe0120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
new file mode 100644
index 0000000..ca95084
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
@@ -0,0 +1,47 @@
+/dts-v1/;
+
+/include/ "bcm6358.dtsi"
+
+/ {
+	compatible = "sfr,nb4-ser", "brcm,bcm6358";
+	model = "SFR Neufbox 4 (Sercomm)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&leds0 {
+	status = "ok";
+
+	alarm_white@0 {
+		reg = <0>;
+		active-low;
+		label = "nb4-ser:white:alarm";
+	};
+	tv_white@2 {
+		reg = <2>;
+		active-low;
+		label = "nb4-ser:white:tv";
+	};
+	tel_white@3 {
+		reg = <3>;
+		active-low;
+		label = "nb4-ser:white:tel";
+	};
+	adsl_white@4 {
+		reg = <4>;
+		active-low;
+		label = "nb4-ser:white:adsl";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
-- 
1.9.1

Re: [PATCH 2/2] bmips: add device tree example for BCM6358

[Florian Fainelli]

On January 17, 2016 3:28:21 AM PST, "Álvaro Fernández Rojas" <noltari@gmail.com> wrote:
>This adds a device tree example for SFR Neufbox4 (Sercomm version),
>which
>also serves as a real example for brcm,bcm6358-leds.
>
>Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

-- 
Florian

Re: [PATCH 2/2] bmips: add device tree example for BCM6358

[Rob Herring]

On Sun, Jan 17, 2016 at 12:28:21PM +0100, Álvaro Fernández Rojas wrote:
> This adds a device tree example for SFR Neufbox4 (Sercomm version), which
> also serves as a real example for brcm,bcm6358-leds.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

[...]

> diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi 
b/arch/mips/boot/dts/brcm/bcm6358.dtsi
> new file mode 100644
> index 0000000..b2d11da
> --- /dev/null
> +++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
> @@ -0,0 +1,111 @@
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	compatible = "brcm,bcm6358";
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		mips-hpt-frequency = <150000000>;
> +
> +		cpu@0 {
> +			compatible = "brcm,bmips4350";
> +			device_type = "cpu";
> +			reg = <0>;
> +		};
> +
> +		cpu@1 {
> +			compatible = "brcm,bmips4350";
> +			device_type = "cpu";
> +			reg = <1>;
> +		};
> +	};
> +
> +	clocks {
> +		periph_clk: periph_clk {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <50000000>;
> +		};
> +	};
> +
> +	aliases {
> +		leds0 = &leds0;

Why do we need alias for LEDs?

> +		uart0 = &uart0;
> +		uart1 = &uart1;
> +	};

[...]

> diff --git a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
> new file mode 100644
> index 0000000..ca95084
> --- /dev/null
> +++ b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
> @@ -0,0 +1,47 @@
> +/dts-v1/;
> +
> +/include/ "bcm6358.dtsi"
> +
> +/ {
> +	compatible = "sfr,nb4-ser", "brcm,bcm6358";
> +	model = "SFR Neufbox 4 (Sercomm)";
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x00000000 0x02000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200";
> +		stdout-path = &uart0;

You shouldn't need both here. Just stdout-path.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/2] bmips: add device tree example for BCM6358

[Álvaro Fernández Rojas]

El 20/01/2016 a las 17:59, Rob Herring escribió:
> On Sun, Jan 17, 2016 at 12:28:21PM +0100, Álvaro Fernández Rojas wrote:
>> This adds a device tree example for SFR Neufbox4 (Sercomm version), which
>> also serves as a real example for brcm,bcm6358-leds.
>>
>> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> [...]
>
>> diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi
> b/arch/mips/boot/dts/brcm/bcm6358.dtsi
>> new file mode 100644
>> index 0000000..b2d11da
>> --- /dev/null
>> +++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
>> @@ -0,0 +1,111 @@
>> +/ {
>> +	#address-cells = <1>;
>> +	#size-cells = <1>;
>> +	compatible = "brcm,bcm6358";
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		mips-hpt-frequency = <150000000>;
>> +
>> +		cpu@0 {
>> +			compatible = "brcm,bmips4350";
>> +			device_type = "cpu";
>> +			reg = <0>;
>> +		};
>> +
>> +		cpu@1 {
>> +			compatible = "brcm,bmips4350";
>> +			device_type = "cpu";
>> +			reg = <1>;
>> +		};
>> +	};
>> +
>> +	clocks {
>> +		periph_clk: periph_clk {
>> +			compatible = "fixed-clock";
>> +			#clock-cells = <0>;
>> +			clock-frequency = <50000000>;
>> +		};
>> +	};
>> +
>> +	aliases {
>> +		leds0 = &leds0;
> Why do we need alias for LEDs?
Okay, I will remove this, but you should know it was accepted for 
BCM6328 and BCM6368 too:
http://git.linux-mips.org/cgit/sjhill/linux-sjhill.git/commit/arch/mips/boot/dts/brcm?h=mips-for-linux-next&id=db66dbbbfd8ded204a97d090357aff582968fcf5
http://git.linux-mips.org/cgit/sjhill/linux-sjhill.git/commit/arch/mips/boot/dts/brcm?h=mips-for-linux-next&id=70ce14bfc9fdb9b6af84ac492e9d3311551618a5
>
>> +		uart0 = &uart0;
>> +		uart1 = &uart1;
>> +	};
> [...]
>
>> diff --git a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
>> new file mode 100644
>> index 0000000..ca95084
>> --- /dev/null
>> +++ b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
>> @@ -0,0 +1,47 @@
>> +/dts-v1/;
>> +
>> +/include/ "bcm6358.dtsi"
>> +
>> +/ {
>> +	compatible = "sfr,nb4-ser", "brcm,bcm6358";
>> +	model = "SFR Neufbox 4 (Sercomm)";
>> +
>> +	memory@0 {
>> +		device_type = "memory";
>> +		reg = <0x00000000 0x02000000>;
>> +	};
>> +
>> +	chosen {
>> +		bootargs = "console=ttyS0,115200";
>> +		stdout-path = &uart0;
> You shouldn't need both here. Just stdout-path.
Okay, I will use stdout-path only, but once again you should know that 
both are used on every bmips board:
https://github.com/torvalds/linux/tree/master/arch/mips/boot/dts/brcm
https://github.com/torvalds/linux/blob/master/arch/mips/boot/dts/brcm/bcm93384wvg.dts#L9
...
https://github.com/torvalds/linux/blob/master/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts#L14
>
> Rob
Álvaro.

[PATCH 2/2] bmips: add device tree example for BCM6358

[Álvaro Fernández Rojas]

This adds a device tree example for SFR Neufbox4 (Sercomm version), which
also serves as a real example for brcm,bcm6358-leds.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 v5: more device tree improvements
  - There is just ohci/ehci node.
  - Avoid using underscores in node names.
  - Use interrupt-controller for cpu_intc.
  - Rename uart aliases to serial.
 v4: Device tree improvements:
  - Switch to native-endian for syscon.
  - Switch to bcm6345-l1-intc interrupt controller.
  - Add ehci and ohci nodes.
 v3: Device tree fixes
  - Use interrupt-controller instead of periph_intc.
  - Use led@# instead of naming the LEDs.
 v2: Remove led0 alias and use stdout-path only

 .../devicetree/bindings/mips/brcm/soc.txt          |   2 +-
 arch/mips/bmips/Kconfig                            |   4 +
 arch/mips/boot/dts/brcm/Makefile                   |   2 +
 arch/mips/boot/dts/brcm/bcm6358.dtsi               | 130 +++++++++++++++++++++
 arch/mips/boot/dts/brcm/bcm96358nb4ser.dts         |  46 ++++++++
 5 files changed, 183 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/boot/dts/brcm/bcm6358.dtsi
 create mode 100644 arch/mips/boot/dts/brcm/bcm96358nb4ser.dts

diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt
index 7bab90c..e58a4f6 100644
--- a/Documentation/devicetree/bindings/mips/brcm/soc.txt
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt
@@ -4,7 +4,7 @@ Required properties:
 
 - compatible: "brcm,bcm3384", "brcm,bcm33843"
               "brcm,bcm3384-viper", "brcm,bcm33843-viper"
-              "brcm,bcm6328", "brcm,bcm6368",
+              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368",
               "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
               "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"
 
diff --git a/arch/mips/bmips/Kconfig b/arch/mips/bmips/Kconfig
index e2c4fd6..264328d 100644
--- a/arch/mips/bmips/Kconfig
+++ b/arch/mips/bmips/Kconfig
@@ -21,6 +21,10 @@ config DT_BCM93384WVG_VIPER
 	bool "BCM93384WVG Viper CPU (EXPERIMENTAL)"
 	select BUILTIN_DTB
 
+config DT_BCM96358NB4SER
+	bool "BCM96358NB4SER"
+	select BUILTIN_DTB
+
 config DT_BCM96368MVWG
 	bool "BCM96368MVWG"
 	select BUILTIN_DTB
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
index eabeb60..fda9d38 100644
--- a/arch/mips/boot/dts/brcm/Makefile
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_DT_BCM93384WVG)		+= bcm93384wvg.dtb
 dtb-$(CONFIG_DT_BCM93384WVG_VIPER)	+= bcm93384wvg_viper.dtb
+dtb-$(CONFIG_DT_BCM96358NB4SER)		+= bcm96358nb4ser.dtb
 dtb-$(CONFIG_DT_BCM96368MVWG)		+= bcm96368mvwg.dtb
 dtb-$(CONFIG_DT_BCM9EJTAGPRB)		+= bcm9ejtagprb.dtb
 dtb-$(CONFIG_DT_BCM97125CBMB)		+= bcm97125cbmb.dtb
@@ -14,6 +15,7 @@ dtb-$(CONFIG_DT_BCM97435SVMB)		+= bcm97435svmb.dtb
 dtb-$(CONFIG_DT_NONE)			+= \
 						bcm93384wvg.dtb		\
 						bcm93384wvg_viper.dtb	\
+						bcm96358nb4ser.dtb	\
 						bcm96368mvwg.dtb	\
 						bcm9ejtagprb.dtb	\
 						bcm97125cbmb.dtb	\
diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi
new file mode 100644
index 0000000..f9d8d39
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -0,0 +1,130 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6358";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <150000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@fffe0000 {
+			compatible = "syscon";
+			reg = <0xfffe0000 0xc>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@fffe0008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@fffe000c {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfffe000c 0x8>,
+			      <0xfffe0038 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		leds0: led-controller@fffe00d0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-leds";
+			reg = <0xfffe00d0 0x8>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@fffe0100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@fffe0120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@fffe1300 {
+			compatible = "brcm,bcm6358-ehci", "generic-ehci";
+			reg = <0xfffe1300 0x100>;
+			big-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+			status = "disabled";
+		};
+
+		ohci: usb@fffe1400 {
+			compatible = "brcm,bcm6358-ohci", "generic-ohci";
+			reg = <0xfffe1400 0x100>;
+			big-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <5>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
new file mode 100644
index 0000000..f412117
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
@@ -0,0 +1,46 @@
+/dts-v1/;
+
+/include/ "bcm6358.dtsi"
+
+/ {
+	compatible = "sfr,nb4-ser", "brcm,bcm6358";
+	model = "SFR Neufbox 4 (Sercomm)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&leds0 {
+	status = "ok";
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		label = "nb4-ser:white:alarm";
+	};
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "nb4-ser:white:tv";
+	};
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "nb4-ser:white:tel";
+	};
+	led@4 {
+		reg = <4>;
+		active-low;
+		label = "nb4-ser:white:adsl";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
-- 
2.1.4

Re: [PATCH 2/2] bmips: add device tree example for BCM6358

[Rob Herring]

On Sat, Apr 09, 2016 at 12:56:48PM +0200, Álvaro Fernández Rojas wrote:
> This adds a device tree example for SFR Neufbox4 (Sercomm version), which
> also serves as a real example for brcm,bcm6358-leds.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  v5: more device tree improvements
>   - There is just ohci/ehci node.
>   - Avoid using underscores in node names.
>   - Use interrupt-controller for cpu_intc.
>   - Rename uart aliases to serial.
>  v4: Device tree improvements:
>   - Switch to native-endian for syscon.
>   - Switch to bcm6345-l1-intc interrupt controller.
>   - Add ehci and ohci nodes.
>  v3: Device tree fixes
>   - Use interrupt-controller instead of periph_intc.
>   - Use led@# instead of naming the LEDs.
>  v2: Remove led0 alias and use stdout-path only
> 
>  .../devicetree/bindings/mips/brcm/soc.txt          |   2 +-
>  arch/mips/bmips/Kconfig                            |   4 +
>  arch/mips/boot/dts/brcm/Makefile                   |   2 +
>  arch/mips/boot/dts/brcm/bcm6358.dtsi               | 130 +++++++++++++++++++++
>  arch/mips/boot/dts/brcm/bcm96358nb4ser.dts         |  46 ++++++++
>  5 files changed, 183 insertions(+), 1 deletion(-)
>  create mode 100644 arch/mips/boot/dts/brcm/bcm6358.dtsi
>  create mode 100644 arch/mips/boot/dts/brcm/bcm96358nb4ser.dts

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html